Reviews Lift Components

Ubabub Pod 2-in-1 Convertible Crib with Toddler Bed Conversion Kit

  • Consciously Sourced: timber components have been sourced from renewable plantations, uses non-toxic finishes, and all plastic and metal components have been selected for their recyclable properties.
  • Clear View: Clear acrylic sides for greater visibility and unique star-shaped laser cut-outs allowing for adequate airflow.
  • Low Height: designed to make it easy to lift your child in and out of the crib.
  • Adaptable: Converts to toddler bed (conversion kit and custom-fitted mattress included).
  • Easy to clean and assemble with two adjustable mattress positions.
Check Stock

Sunnydaze 40 GPH Submersible Electric Pump for Hydroponics, Aquaponics, Small Fountains, and Aquariums, 120 Volts

  • ...and 4 EXTENSION RISERS. Risers can be used in any combination to adjust height..
  • DURABLE QUALITY: Our Polished Aluminum Oxide Ceramic Impeller Shaft and Bearings insure long pump life because they are non-corrodible with hardness more than 3 times that of stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts. This pump incorporates a magnetic wet-rotor design, so there is no seal to fail that would damage the pump motor..
  • EFFICIENT: Neodymium Iron Boron (NdFeB) Magnets are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency. Water-Lubricated Nitrile Bushings are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting..
  • SAFE & EASY: Safe for fish with no exposed copper and oil free. Easy to clean with no tools required to disassemble and remove the impeller/rotor. Our waterproof SJTW Electric Cord has 18 gauge copper wire, molded plug with ground and a heavy duty flexible vinyl jacket which resists oil/grease/moisture/abrasion with very good flexibility at all temperatures..
Check Stock

Kraus KL130 Chair Stair Lifts Straight Rail Stairlift

  • ...icensed installation. We measure steps, verify it fits your stairway, deliver, and install the lift. We guarantee that our product will fit your stairway, or you will get a 100% refund!.
  • EXCEPTIONAL SERVICE AND SUPPORT - Installation within 2 to 7 business days of order in greater NY area. Lifetime warranty on major components and two years on all parts. Post-installation help/service desk..
  • OUTSTANDING FEATURES - Narrowest vertical rail - only 3 inches wide. The chair folds up to under 12” inches to maximize space and allow room for others to use stairs. Attaches directly to the steps - so no damage to the walls. Lever controls on chair arm and two remote controls for easy, simple operation..
  • SMOOTH RIDE - Smooth, Quiet, and SAFE ride. Secure rack and pinion hidden gear system. State of the art safety sensors with audio warning signals stop the lift automatically. Comfortable padded seat swivels to safely exit on top. Battery operated - Works during power outage..
  • SERVICING GREATER NEW YORK AREA ONLY (SEE MAP) - The package includes 1 lift for 1 straight flight of stairs. (If two flights order 2 lifts). The stairs should be at least 28” wide. For installation on indoor stairs. For users under 300 pounds. For outdoor lifts, curved lifts and for passe....
Check Stock

Panther Marine 55-2600 Auxiliary Motor Steering Kit - Stainless Steel

  • Brand New RockJock Jeep TJ/LJ/XJ/MJ/ZJ Currectlync Steering System (Part #CE-9701).
  • Compatible with: 1997-2006 TJ/LJ Jeep Wranglers, 1984-2001 XJ Cherokee, 1993-1998 ZJ Grand Cherokee, 1985-1992 MJ Comanche.
  • The RockJock Currectlync heavy duty tie rod and drag link system for TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 1/4″ diameter forged alloy drag link, and 1 1/4″ solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8″ thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket..
  • This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components..
  • NOTE: This unit is designed to be used on vehicles with 4″ of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2″ bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment..
Check Stock

Lippert Components 433458 Hydraulic Jack Assembly - Aluminum - 8,000 lbs Black

  • COMPATIBILITY — Designed to replace Level Up Hydraulic Jacks for the front, rear, driver, or passenger locations of your 5th wheel RV or travel....
  • EASY INSTALLATION — With minimal components needed, it’s easy to remove your RV’s old jack and replace it with this new aluminum, hydraulic jack.
  • RELIABLE STRENGTH — Engineered with an 8,000 lb. lift capacity, this large, aluminum landing gear replacement jack was built tough with a 9”....
  • REPLACEMENT PART — At Lippert, we help you take the guesswork out of replacement parts with exact-match components designed to get your RV’s....
  • IMPORTANT INFORMATION — Please reference your owner’s manual for detailed product installation and safety information before installation.
Check Stock

EACCESSORIES EA Sunroof Track Assembly Repair Kit fit for Ford F-150 (Raptor Included) 2000-2014 (2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Years Included)

  • This Sunroof Repair Kit fit for FORD F-150 (RAPTOR included) 2000-2014 ✔ Our repair kit includes replacement sunroof lift arms, cam brackets and rear drain trough guide brackets..
  • ✔ This repair kit replaces all the moving parts of the sunroof except the motor and cables which very rarely fail. ✔ The headliner & sunroof assembly must be removed from the vehicle to install the replacement parts..
  • Feature: ✔ Replacement Sunroof Lift Arms ✔Cam Brackets ✔ Rear Drain Trough Guide Brackets ✔ Rivets ✔ Synthetic Grease ✔ Grease Applicator.
  • *This repair kit replaces all the moving parts of the sunroof except the motor and cables. Package Includes: Includes lift arms, cam brackets and trough guides (All moving mechanism components on both sides) As Picture Show!!!.
Check Stock

Whisper Ride 1000 Motorized TV Lift for TVs up to 75”, 5-Year Warranty, Danish Engineered for a Thinner Profile, Increased Stability and Safety

  • ... mechanism encounters an obstruction while lowering, the built-in “reverse function” will stop the lift immediately, reverse two inches, and then shut off..
  • US WARRANTY INCLUDED – Have peace-of-mind with a 5-year warranty from Wood Technology on electronics and metal components. Ongoing support is available from our dedicated customer service team. Complete kit includes 2 horizontal and 2 vertical TV mounting brackets, hardware pack, lid lifter, RF wireless remote, manual rocker switch, and installation instructions..
  • REMOTE-CONTROLLED MECHANISM – Securely store your mounted TV when it’s not in use and impress your family and friends with a push of a button when its time to tune in. Sit back, relax, and let the Whisper Ride TV lift do the rest..
Check Stock

Dorman 702-001 Front Door Panel Install Kit - GM Compatible with Select Models

  • Direct replacement - this door panel install kit is designed to match the original hardware required to service the window regulator or window lift motor on specified vehicles.
  • Ideal solution - this kit is a reliable replacement for original components that have been lost or broken.
  • Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Explosion Proof 20L Rotary Evaporator Bundle - Includes 2100 Watt Low Temperature Chiller and Solvent Resistant Vacuum Pump

  • 1.All the wetted components are made of high quality boro 3.3 glass and PTFE, for excellent corrosion resistance..
  • 2.High torque motor, high precision worm-gear gearbox and hand lift components for years of quiet and reliable operations..
  • 3.1-year hassle-free warranty and life-long parts and phone support..
  • 4.High precision vacuum seal and vapor tube design leads to ultimate vacuum performance (1 mbar end vacuum, 003c 1 mbar/min vacuum leakage)..
  • 5.Easy and straight forward operation of speed and temperature controller..
Check Stock