Reviews Left handed Tap Set With Drill Bits

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

MOTORHEAD 20V ULTRA Cordless Drill Driver, Lithium-Ion, ½” Keyless Chuck, 16+1+1 Clutch, 2-Speed Transmission, Variable Speed Trigger, Built-in LED, 2Ah Battery, Charger, 22 Accessory Bits, USA-Based

  • [20V ULTRA Platform: Accomplish Anything] – Powered by the MOTORHEAD 20V ULTRA Lithium-Ion battery platform. Easily share and swap batteries across the entire MOTORHEAD 20V ULTRA family of power tools including: Drills, Circular Saws, Reciprocating Saws, Jigs Saws, Angle Grinders, Oscillating Multi-tools and more.
  • [1/2” KEYLESS CHUCK w/ 16+1+1 CLUTCH TORQUE SETTINGS] – From the toughest of hardwoods to the most delicate of softwoods, this drill does it all. The heavy-duty 100% metal ratcheting chuck grabs on like a gator and never lets loose until desired..
  • [2-SPEED ALL-METAL TRANSMISSION & VARIABLE TRIGGER] – Set to low speed when driving screws and fast when drilling holes. Get additional pinpoint speed control with the step modulated variable speed trigger. All this functionality is backed by a though under fire 100% metal transmission. No flimsy plastic gearing that slips and wears down over time..
  • [BUILT-IN LUMINMAX LED LIGHT] – Illuminate your work surface before drilling and driving. Tap the trigger and the integrated LED lights up for 10 seconds, allowing you to set your screws and drill bits in the right place before pulling the trigger without an additional light source..
  • [2AH BATTERY, 1-HR QUICK CHARGER & BELT HOOK] – Includes a co....
Check Stock

IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377

  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
  • Constructed of high carbon steel for durability.
  • Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
  • Perfect set for the professional craftsman.
  • Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.
Check Stock

SharCreatives 35-Piece Screw Extractor and Drill Bit Set, Drill Bits and Multi-spline Extractors for removing tricky, stripped. damaged, broken screws, bolts, studs, fittings and more.

  • ✔ PREMIUM 35 PCS SCREW EXTRACTOR SET - (16) left hand cobalt drill bits (5/64" - 1/2"), (13) multi-spline screw extractor (1/8" - 1/2") and (6) spiral screw extractors (#1 - #6). Ideal for removing stripped , rounded off, painted over or rusted screws and bolts. Suitable for majority sizes of a screw or a bolt..
  • ✔ PROFESSIONAL HEAVY DUTY WITH IMPRESSIVE DESIGN AND SUPERIOR QUALITY - The left hand drill bits are made of high-quality high-speed steel. It has high hardness and durability, and it is easy to disassemble damaged screws. The spiral screw extractor made of chrome-molybdenum steel (high carbon steel) and sandblasted surface for greater durability and to withstand corrosion. The spiral pattern design can provide sufficient gripping force to facilitate removal..
  • ✔WELL ORGANIZED IN THE CARRYING CASE - laser etched markings of sizes on bits that organized in the heavy-duty and lightweight plastic case for easy storage and transportation..
  • ✔ COMFORTABLE, CONVENIENT AND EFFECTIVE FOR WIDE RANGE OF APPLICATIONS - The spiral flutes designed to enter deeply into the metal as you turn the tool for ....
Check Stock

Gunsmithing At Home For Beginners And Novices

  • 49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....
Check Stock

THINKWORK Bolt Extractor Set, 54 Pieces Easy Out Screw Extractor Set, Stripped Lug Nut Remover for Removing Damaged, Frozen, Rusted, Rounded-Off Bolts, Nuts & Screws

  • ...OR SIZE】:These 6-Pieces Bolt&Nut extractors work on SAE/Metric sizes - 5/16"(8mm), 10mm, 9/16"(14mm), 11/16", 3/4"(19mm), with 3/8 "to 1/4"hex adapter. And 6-Pieces Screw Extractor: 1#, 2#, 3#, 4#, 5#, 6#..
  • 【MULTI-SPLINE EXTRACTORS AND DRILL BIT KIT SIZE】:10-Pieces Multi-Spline Extractors: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32". 10-Pieces Left Hand HSS Drill Bit: 1/8", 5/32", 3/16, 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 11/32". All these tools are clearly marked..
  • 【LEFT-HAND DRILL BIT SET】:The left-hand drill bits of this extractor set are made of high-speed steel, strong than right-hand drill bits, and not easy to wear. The 135° angle design of the head makes it easier to touch the fasteners and ensures the precise countersinking and hole smooth clean..
  • 【SUPERIOR GRIPPING POWER】:Each lug nut remover is precision designed. The reverse spiral groove of the socket is designed to bite and provide maximum grip. The more you turn, the tighter the socket gri....
Check Stock

6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC（Golden）

  • Complete Set: Set of 6 pcs drill bit tool, 6 different size tap drill bit, M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch, a variety of specifications to choose from, convenient for work..
  • 3-in-1 Combination Tap: Drilling - tapping - chamfering, three-in-one composite tap with hexagonal handle can be achieved in one step without frequent replacement, and the operation is more convenient and faster, high processing efficiency..
  • Professional Tools: The standard 1/4 inch hex shank can be installed on ordinary electric drills and bench drills, with strong locking force and not easy to slip. The pointed tap can be tapped to the bottom of the blind hole, large helix angle, better chip removal performance.
  • Premium Material: Our tapping bits are made of high-speed steel with titanium coating. They have high hardness, sharpness and wear resistance, high heat resistance and strong cutting performance. They are a good helper for cutting high-hardness materials..
  • Widely Application: Our tap drill bits have strong cutting toughness, suitable for various cutting series, processing range: copper, aluminum, brass, iron plate, steel, metal sheet, plastic and other metals..
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock