Reviews Led Screen Led Module

Treedix 48pcs RGB LED WS2812B 5050 Light Board Light Matrix Strip Driver Board Individually Addressable for Arduino and Raspberry Pi

  • This is a small chainable board with 48 5050 WS2812 RGB LEDs.
  • Each pixel of WS2812 is individually addressable, because the driver chip is located inside the LED, and only one IO port is needed to control multiple LEDs..
  • There are pads on the back for connecting wires or breadboard pins to fix the board to many different surfaces. Applications: Full-colour module, Full-color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen..
  • The wiring is simple and easy to control. It can output some full-color LED lights after quick soldering. It is compatible with Arduino, Raspberry Pi, Teensy, T1000S, K1000C and other programmable controllers..
  • There are connection interfaces at both ends, which can be directly plugged and unplugged, and can be used alone and combined into different shapes. The serial connection interface can complete data reception and decoding through a signal line. The library and code are easy to use and operate.
Check Stock

DC 12V LED Power Supply Driver Transformer - Lustaled 15W Waterproof IP67 120VAC to 12V DC Converter Constant Voltage LED Switching Power Supply for LED Strip Lights, G4 MR11 MR16 LED Display (2-Pack)

  • [DC 12V LED Power Supply]: Mini size 15W LED driver transformer, Input: AC100-265V, Output: DC 12V.
  • [Wide Application]: Our 15W LED power supply driver is suitable for most of devices with DC12V such as CCTV, Illuminated Module Signboard, Cabinet Lights, LED Strip Lights, LED Display, LED Module, Indoor/Outdoor Deck Lights, Indoor Stair Step Lights, LED Light Bulbs like G4, MR11, MR16 LED bulbs..
  • [Good Heat Dissipation]: LED 12V transformer is made of aluminum, easy for heat dissipation and ensure stability. 100% Waterproof IP67 protect for outdoor use.
  • [Safer Design]: This DC 12V LED driver is flicker-free output, thermal overload, over current, over voltage and short circuit protection built in.
  • [Note]: Please confirm whether the input voltage (AC100-265V) can work in your place before purchase the 12V switching converter, please make sure the power is lower than or equal to the rated power supply, otherwise it may burn..
Check Stock

GPIO Status LED Terminal Block Breakout Board for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • GPIO status LED and power 5V / 3.3V indication..
  • GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
  • Support for Raspberry Pi A+, 3A+, B+, 2B, 3B, 3B+, 4B.
  • Terminal block pitch 3.5mm, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm..
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi module).
Check Stock

RF Coax to HDMI DVI Demodulator TV Tuner for PAL B/G System Used in Europe Asia Middle East

  • PAL B/G RF coax demodulator for converting the foreign PAL B/G type RF coax cable TV signals into either 1080p HDMI or DVI output at 1920x1080 pixels.....
  • Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants. Full-frequency PAL....
  • External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth....
  • Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote....
  • Digital LED screen for TV channel display on the front panel of the module to show users the TV channel selected. Automatic video/audio gain control....
Check Stock

12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

Brite Strike Camp Perimeter Security System, Survival Signaling System, Complete Emergency System for Hunters, Campers, Hikers, Fishermen, BSTCAPSS

  • The camp alert perimeter security system and survival signaling system is a complete survival emergency system for hunters, campers, hikers, and fishermen..
  • works as a perimeter security system that will alert you if anyone or an animal wanders into your camp ground. The alarm module can be used as an audible emergency device to let passers-by know you need help..
  • alarm module has bright flashing blue leds that can be used as a signaling device at night. It also has a red led flashlight built in for map reading that will not destroy your night vision..
  • The CAPSS3 kit comes with two apals (all purpose adhesive light strips). the apals have a polished aluminum front that can be used as a small signaling mirror in the daytime..
  • repellant security camping security mountain lion bear alarm rescue signal signal bobcat system protector camp camping.
  • 135 db alarm module with built in red led flashlight and side blue leds for signaling. (Note: peel off backing with 3M adhesive for mounting).
  • Two blue led apals with polished aluminum surface for signaling day or night.
  • Two nylon zip ties for securing alarm module to a branch or stake.
Check Stock

Sekonic L-358 Flash Master Light Meter

  • Hi-Res 800 x 600 SVGA LED Backlit Screen 4:3 ratio, Auto Rotate Sensor, Remote Control.
  • Sekonic RT-32 Radio Transmitter Module installs easily, enabling wireless.
  • Dust-proof and splash-proof (JIS Standard Water Resistance Class 4).
  • Incident readings of three-dimensional subjects are taken using the Lumisphere fully extended.
  • Up to 9 readings can be stored in memory for meter averaging and contrast evaluations in Aperture and Shutter priority modes.
  • Exposures accurate down to a tenth-of-a-stop for both ambient and electronic flash light readings.
Check Stock

GKOLED 6.8 Inch LED Low Voltage Outdoor Hardscape Light, Light Module Replaceable, Retaining Paver Wall Step Lighting, 2700K 1.5W, IP65 for Wet Location, Die-cast Aluminum Housing

  • Easy LED Module Replacement: With new version, the LED module of this hardscape light can be easily replaced. No need to cut the wires or remove the entire light if the LED module needs to be replaced after years of use. Wise choice for long-term use..
  • Sturdy and Durable: Rugged die-cast aluminum housing is protected by the powder coated finish which grants excellent corrosion resistance and heat dissipation. The IP65 waterproof rating lets this step light suitable for wet locations..
  • Widely Application: With 12pcs 2700k LED chips, this step light can emit even and comfortable warm white light to light up your outdoor retaining walls, barbecue fire pits, steps, decks, flowerbeds and garden..
  • Safe Operation: 12V operating voltage, no risk of electric shock. Must be powered by 12V low voltage transformer (Not Included)..
  • 5-Year Warranty: We stand behind our product with a 5-year warranty. Contact us and we are here to help..
Check Stock

12v to 5v Converter Buck Module USB Output Power Adapter Dc Power Adapter Converter Direct Current to Direct Current Regulator Car Power Converter (1)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock