Reviews Leaf Spring Bushing Tool

LIBRA 3500lb Tandem Trailer Axle Suspension Kit Leaf Springs U-Bolt & Hanger Kit

1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
Include Complete single trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x 3" tall hangers, 2 x 2.1" tall hangers, 4 x shackle straps (eye to eye 3.09"), 6 x 9/16"-18 x 3" long shackle bolts and locknuts.
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

3,500lbs capacity per each spring, for standard 7,000lbs trailer axle.
Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
Completes the job in a fraction of the time that traditional methods take.
Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.

3,500lbs capacity per each spring , for standard 7,000lbs trailer axle.
Free length from center of eye to end of hook: 26-7/8", Free open: 3.19", width of leaf: 2", 5 leaves, 9/16" bushing dia.
It will replace 72-32 / 1203T3 / LIB-501-SH / UNA232 / 125023 / 9150000 (different SKU# but same spring).
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

3,000lbs capacity per each spring, for standard 5,200-6,000lbs trailer axle.
Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 5 leaves, 9/16" bushing dia.
It will replace SW5 / LIB-502-DE / UNA111 / PR5 / 9150018 / 93163 (different SKU# but same spring).
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

Assemble and disassemble pen parts on one easy to use tool.
Acts as traditional pen press to press your pen parts together.
Disassembly function provides invaluable way to take virtually any pen apart.
Included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6" of soft-grip tubing, (1) 7mm mechanism bushing for parts protection.
Spring-loaded ram acts as a 3rd hand for quick, easy parts positioning.
Sled mechanism slides the stop into position.
Locking lever then securely locks the rod in place.
The (6) disassembly rods handle nearly all tube diameters and parts configurations, including pen tips and clips.
Dedicated 7mm bushing allows for disassembly of any 7mm pen.
Soft-grip tube and V-profile clamp provides parts protection during disassembly process.

Includes a 7" Driver for Applications withLimited Access..
Pneumatic bushing driver set removes and installs truck andtrailer 1-3/8" anchor pin bushings and stuck anchor pins..
Double sided cone snaps onto driver to drive out and installbushings.
Use flanged end to install and tapered end toremove.
Also removes truck leaf spring bushings..

1,750lbs capacity per each spring, for standard 3,500lbs trailer axle.
Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..