Reviews Latches

10th Anniversary Hood Replacement Hood Heat Dispersion for 2007-2017 Jeep Wrangler JK JKU

  • Replacement Hood Latch Set of 2 - Includes both left and right hood hold-down catch for your Jeep Wrangler TJ. If your existing hood latches are all worn out and faded, it can be dangerous as the elasticity of your old hood latch will wear and will no longer secure the hood tightly to the fenders over time. This can result into fluttering at higher speeds and worse become unlatched..
  • Fits The Following Vehicles - 1997-2006 Jeep Wrangler | Replacing the new latches manufactured by AA Ignition is an inexpensive insurance of preventing the hood from unlatching. Installtion is easy and does not require any special tools at all. Fits popular Jeep Wrangler TJ models from years 97, 98, 99, 00, 01, 02, 03, 04, 05, 06..
  • Replaces Part# 55176636AD, 68038118AA, Dorman 42422 Found on the popular Wrangler TJ models. This is a direct replacement for your factory hood latches and it fits popular Wrangler TJ models with years 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006..
  • OEM Fit, Quality, Finish - This pair of hood latches features a redesigned construction to insure it will last longer than the factory part. While this is not a genuine Jeep or Dorman part, it is a direct replacement and it will appear, fit and work like the factory part..
Check Stock

Powertronics Probe 100+ - USB Power Line Monitor, Black

  • Detects power problems quickly and economically and includes software to save disturbances on a computer.
  • Latches high frequency noise and Indicates Surges and Sags and Latches Power fail and Dropouts.
  • Measures common-mode noise and Latches spikes (impulses).
  • Provided with the Probe 100+ is the Probe Communications Software, this software facilitates the recording of AC line disturbances as they occur.
  • You can connect your PC to the P100+ to capture and save this important information through its USB Port.
Check Stock

EWONICE Cooler Replacement Lid Latches Fits Yeti RTIC Hard Coolers and Other Related Coolers T-Latch (2 - Pack)

  • Our replacement kit is easily to install , use flat head screw driver or putty knife to pry pin away from cooler, pin removed old latch will fall off,then take our new cooler latch and insert into groove & push pin back into place.
  • Our replacement cooler latches widely replacement for rtic coolers and yeti coolers, also fits many other ccooler brands ,perfect cooler replacement parts.
  • Made of durable and premium rubber , t-handle rubber flexible draw latches, with good elastomeric to reduce vibration but keep the preloading for the joint thing.
  • The outside surface is mirror polished, anti-corrosion, size: 4.4" length, 2.74" width.
  • Package includes: 2x lid latches, 100% cooler lid latches quality satisfaction guarantee,12-month free warranty and friendly customer service.
Check Stock

SKB Cases iSeries Mil-Spec AR Hard Exterior Waterproof Single Long Rifle Case

  • Molded from ultra-high density molecular weight polyethylene.
  • Interior Dimensions (L x W x D): 42.50 x 14.50 x 5 inches.
  • Trigger release latches can be retrofitted with TSA accepted key locking latches..
  • Bumper protected hardware and patented nylon trigger release latches with locks.
  • Manufacturer warranty: Limited Lifetime warranty.
Check Stock

NeverBreak Parts - Igloo Cooler Replacement Parts - Large White Kit | High Strength Igloo Cooler Hinges Replacement with Latches | Ice Chest Repair Kit

  • DESIGNED TO FIT - Our Igloo cooler hinges and Latches are made to be an exact fit for most rectangular Igloo coolers and ice chests (25 - 165 qt models) hinge replaces Igloo part #24012, latch replaces Igloo part #24013 and included posts replace standard single screw latch posts. See images for exact size and hole spacing measurements. Skimp on other igloo cooler accessories but not on the cooler hardware, save yourself the aggravation and use parts that fit!.
  • MADE TO LAST - Heavy duty material is super strong and flexible and cannot be torn or broken even in extreme hot or cold settings making them the ideal Igloo cooler parts to be used in commercial or marine settings. These igloo cooler replacement parts are a final solution for your broken parts problems..
  • EASY INSTALL - This igloo ice chest repair kit includes all the required posts and stainless steel screws to quickly swap out your broken latches and hinges on standard and marine coolers. Simply remove your old screws and, posts, latches, hinges and discard, screw the new screws into the posts, latches and hinges so they are sticking through the back slightly, line up to holes, screw in and your Igloo coole....
Check Stock

National Hardware N109-070 Gate Latch Cable Pull, Black

  • Use this cable pull with new or existing gate latches.
  • This cable pull does not come with a gate latch.
  • Spring assisted pull for one hand operation.
  • gate latches can still be padlocked while using this gate pull.
  • Stainless steel cable with PVC coating and black power coated finish with weatherguard technology to protect against rust and weather.
  • Fits gates with 2.5-4 inch. All mounting hardware and instructions are included.
  • This gate pull works with National Hardware, Everbilt, and Ace gate latches.
Check Stock

STHang-D 2PCS Compression Latch Lock Trigger Latch Lock Zinc Alloy Adjustable Lever Hand Operated Compression Latch with Raised Trigger Flush Lever Latch

  • High quality material: The compression latches is made of zinc alloy, powder coating and steel material, which is strong and durable and not easy to rust..
  • Application scenarios: compression latches are widely used in electrical enclosures and compartments of ships and yachts, the they can also be used in other places such as industrial machinery buildings..
  • Application Size: Suitable for 0.04-0.20 inch door thickness, you can measure the size of the door before purchase..
  • Secure Design: The latches are designed for security and include two locks and four keys per product, which is very thoughtful..
  • Easy to install and operate: These popular low-profile lever latches present a sleek look for highly visible installations..
Check Stock

2-Pack Replacement Lid Latches Compatible With Yeti and RTIC Hard Coolers, Designed and Manufactured - Larger, Ergonomically Improved Design That Fits all Yeti Tundra Coolers (Blue)

  • Compatibility: Replacement Lid Latches (2 Pack) Is A Patent-Pending Improved Design That Works Specifically With Both the Yeti & Roadie Coolers. Larger, More Durable, Ergonomically Improved Design..
  • Universal Application: From Yeti to RTIC Coolers, Easily Replaces the OEM Lid Latches Utilizing the Same Pin. Our Latches Have Been Molded to Give Your Cooler a Great Look..
  • Best Value: Our Essential Values Yeti & RTIC Hard Coolers Latch Replacements CAN NOT Be Beaten on Price! Not Only the Price Is Right – But Quality Is Even Better. Our 2 Pack Ensures a Better, Safer, & Easier Experience for Opening & Closing Your Favorite Cooler’s Lid!.
  • Durable & Heavy Duty: The BEAST Lid Latches Are Durable Enough and Large Enough to Push the T-Latch in Place Using Your Foot. This Saves the Beating That Your Fingers and Knuckles Take From Opening the Lid 20 to 30 Times a Day..
  • Convenient Design: We Have Designed a Lid Latch That Will Take Less of a Toll on Your Knuckles and Fingers. The Beast Lid Latch Is Longer Between the Catch Ball and T-Handle to Allow for More ....
Check Stock

2-Pack Replacement Lid Latches Compatible With Yeti and RTIC Hard Coolers, Designed and Manufactured - Larger, Ergonomically Improved Design That Fits all Yeti Tundra Coolers (Red)

  • Compatibility: Replacement Lid Latches (2 Pack) Is A Patent-Pending Improved Design That Works Specifically With Both the Yeti & Roadie Coolers. Larger, More Durable, Ergonomically Improved Design..
  • Universal Application: From Yeti to RTIC Coolers, Easily Replaces the OEM Lid Latches Utilizing the Same Pin. Our Latches Have Been Molded to Give Your Cooler a Great Look..
  • Best Value: Our Essential Values Yeti & RTIC Hard Coolers Latch Replacements CAN NOT Be Beaten on Price! Not Only the Price Is Right – But Quality Is Even Better. Our 2 Pack Ensures a Better, Safer, & Easier Experience for Opening & Closing Your Favorite Cooler’s Lid!.
  • Durable & Heavy Duty: The BEAST Lid Latches Are Durable Enough and Large Enough to Push the T-Latch in Place Using Your Foot. This Saves the Beating That Your Fingers and Knuckles Take From Opening the Lid 20 to 30 Times a Day..
  • Convenient Design: We Have Designed a Lid Latch That Will Take Less of a Toll on Your Knuckles and Fingers. The Beast Lid Latch Is Longer Between the Catch Ball and T-Handle to Allow for More ....
Check Stock