Reviews Laser Source

seeed Studio RPLiDAR S1 Portable ToF Laser Scanner Kit - 40M Range

  • 【 TOF Ranging Method】RPLiDAR S1 adopts TOF(Time of Flight) ranging technology, which guarantees the ranging resolution not changing with the distance, the ranging resolution is till stable and accurate..
  • 【 40 Meters Range Radius】 The ranging radius of RPLIDAR S1 up to 40 meters, which meets more application requirements in larger scenarios..
  • 【 Outdoor Available】 Effectively avoiding the strong daylight interference, RPLiDAR S1 has a stable ranging and high-resolution mapping performance in outdoor environment..
  • 【 360° Omnidirectional Scan】 The ranging core of RPLIDAR S1 runs clockwise to perform a 360-degree omnidirectional laser range scanning for its surrounding environment..
  • 【 Laser Safety Standard】 The RPLiDAR S1 adopts the low power infrared laser light as its light source and drives it by modulated pulse. It reaches Class 1 Laser Safety Standard which can ensure its safety to human eyes..
Check Stock

Bushnell Hybrid Golf Laser Rangefinder + GPS Black Large

  • Dual battery source (CR2 for Laser and USB for GPS).
Check Stock

Laser Level, RockSeed 50 Feet Cross Line Laser with Self-Leveling, Vertical and Horizontal Line, Rotatable 360 Degree, Carrying Pouch, Battery Included (Green)

  • ★ GREEN CROSS LINE LASER ★ This laser level is equipped laser unit, made in Germany, which is the best green laser unit in the word.
  • Green laser is 2 times brighter than red laser with the same light source, very accurate and clear, very stable in indoor using.
  • ★ SELF-LEVELING & MANUAL MODE ★ You can set 2 modes Cross-line laser with slide switch. Self-leveling mode, functioning in leveling and compensation range: can be self-leveling if tilted below 4 ° ± 1 °, 4 °. If you tilt more than 4 degrees, the laser level will issue a warning. In manual mode, the self-leveling feature is disabled and the cloth is locked to use the device at any angle..
  • ★ HIGH PROTECTION GRADE ★ The line laser reaches IP54 protection grade (shock resistant, waterproof, dustproof, shockproof, wear resistant, impact resistance, cold and high temperature.). The durable and high quality shockproof enclosure provides 4 ft. collision protection. It's compact and lightweight for easy gripping, but large enough to sit stably, ideal for construction site work..
  • ★ HIGH VISIBILITY & ACCURACY ★ Two powerful cross line lasers, the laser line is clear and sharp and easily project bright red cross line at 110 ° wide angle to help your leveling work. Horizontal line accurac....
Check Stock

Laser Engraver, befon Upgraded Laser Engraving Cutting Machine, Compressed Spot, 5W-6W Output Power, Eye Protection Fixed-Focus Engraver Machine, DIY Laser Marking, 16.14\x15.74\ Engraving Area

  • Powerful Compressed Laser Spot: The Befon Upgraded 40W laser engraving machine adopts spot compression technology, which makes the light source more concentrated. The normal laser spot is 0.3mm x 0.5mm and the compressed point with us is 0.16mm x 0.19mm. Compared to conventional engraving machines, The high-density laser can easily cut 6mm thick wood and black acrylic.
  • it can directly engrave smooth stainless steel metal and ceramics..
  • New Eye Protection Design: Adopts newly laser protective cover perfectly protect your eyes, a filter UV light for 98%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles..
  • Upgraded High-Performance Fixed-Focus Laser: No need to adjust the focus before engraving.
  • the new laser focal spot is 50% smaller than other ordinary lasers, new laser combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. The new knob design allows you to adjust the distance without the aid of tools. It is more convenient and quick.
  • Wide Compatibility: The Befon Upgraded 40W laser machine can be compatible with various mature engraving software, such as LaserGRBL....
Check Stock

Warrior (Cinemax Original Series Soundtrack)

  • This Certified Refurbished product is manufacturer refurbished it shows limited or no wear.
  • Includes all original accessories plus a 90-day warranty.
  • Optoma CinemaX P2 Smart 4K HDR UHD Ultra-Short Throw Laser Projector.
  • Bright 3,000 lumens laser light source | Rich Cinematic Color and Stunning HDR | NuForce 40W Dolby Digital 2.0 soundbar | Dolby Digital Plus and DTS audio passthrough.
  • IN THE BOX: Distance Cards – Quick Start – User Manual – Bluetooth smart home remote with Airmouse (rechargeable) – Power Cable.
Check Stock

Self Leveling Laser Level, MiLESEEY 3D Green Cross Line Laser Level Three-Plane Leveling and Alignment Laser Tool, Switchable Laser Line Mode and Brightness(3X360° Horizontal Line&Vertical)

  • Notice: MiLESEEY laser level is laser class 2 and laser type 505-530nm,output .
  • [3x360°Full Layout Laser Level] L6G line laser adopted premium green laser unit,It's at least 4x brighter than red lasers utilizing the same power source,with accuracy of 1/9" at 33ft,working range up to 82 ft.This laser line Level built with 1 horizontal 360 plane + 2 vertical 360 plane enable user to cover the floor,wall,ceiling all around the room.Horizontal and vertical lines cross at 90°angles help you to visualize quickly and finish square layout.Ideal laser levels tool for construction.
  • [Self-Leveling & Manual Mode] Under the pendulum unlock status, the laser level will self-level within 3.5°, The laser plumb blink fast if laser level is out of self -leveling (note: when using this self-leveling mode, please place this laser tool on a level surface). Lock the pendulum to switch to the manual mode, then holding down the laser switch button for 3 seconds to turn on the manual mode, It meets your alignment needs from different angles.
  • [Durable Design & Multiple Installation Methods] The laser tool is covered by soft rubber,which delivers soft touch and stronger protection.Over-molded metal laser window with IP54 water/dust resistance withstands t....
Check Stock

Mission First Tactical Torch Standard Mount Black

  • Quick Detach mount for Illumination source or lasers.
  • Accommodates 3/4in, .825in or 1in diameter light/laser.
  • Quick detach mount for illumination source or lasers.
Check Stock

Laser Level with Tripod, 50 ft Laser Leveler Tool Laser Level Green Cross Line Self Leveling, Separate Control 2 Lines, Laser Level for Picture Hanging Construction DIY Light Duty Indoor Project

  • Green Diode Technology: our self leveling laser level adopt green laser which is 2 times brighter than red laser with the same light source, very accurate and clear, very stable in indoor using.
  • If you need to use it outdoors, we recommend using it at dawn, dusk or on cloudy days laser viewing glasses to get any outdoor accuracy.
  • With Adjustable Laser Level Tripod: package included laser Level self leveling in green cross line, it also included laser level tripod with adjustable height legs.
  • The tripod features a steady adjustable base that swivels, adjusts, and tightens laser level for steady measurement applications.
  • The laser level tripod max height is 4.46 feet/ 136 cm.
  • Multiple Modes to Suit Your Needs: this laser leveler tool has 2 modes including self leveling mode and manual mode.
  • This laser has an internal pendulum which helps the level ascertain level lines and true plumb.
  • In self leveling mode, this laser tool is self leveling if slope within 3 degree.
  • When out of 3, the laser tool will alarm and lines will blink.
  • In manual mode allows the laser tool to project non level lines, you can use this laser tool at any angle.
Check Stock

Laser Engraver, ATOMSTACK A5 Pro Laser Engraving Machine 0.08 * 0.08mm Compressed Spot Laset Cutter and Engraver, 5W-6W Output Power, Eye Protection Fixed-Focus, 410x400mm

  • Powerful Compressed Laser Spot: Upgraded 40W laser engraver adopts spot compression technology, which makes the light source more concentrated. The normal laser spot is 0.15mm x 0.15mm and the compressed point with us is 0.08mm x 0.08mm. Compared to conventional engraving machines, The high-density laser can easily cut 6mm thick wood and black acrylic.
  • it can directly engrave smooth stainless steel metal and ceramics.
  • New Eye Protection Design: Adopts newly laser protective cover perfectly protect your eyes, a filter UV light for 98%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
  • High-Performance Fixed-Focus Laser: No need to adjust the focus before engraving.
  • the new laser focal spot is 50% smaller than other ordinary lasers, new laser combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. The new knob design allows you to adjust the distance without the aid of tools. It is more convenient and quick.
  • Stable Structure Design: Atomstack A5 Pro 40W machine design with integrated screw rod which can make the fastest running speed reach 11000/min, It is more stab....
Check Stock