Reviews Laser Engraving Sheet

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

SCULPFUN S9 Laser Engraver, 90W Effect High Precision CNC Laser Cutter and Engraver Machine, Deep Cutting for 15mm Wood, 0.06mm Ultra-Fine Compressed Spot Cutting Machine, Eye Protection Fixed-Focus

  • ... 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm thick plywood, 10mm thick dark acrylic, engraved ceramics, and stainless steel..
  • 【Safety Protection Design】The laser cutter and engraving machine are equipped with a very convenient power switch, which is not available in others. The laser filter cover filters 98% of the UV light to the eyes, you can watch laser engraving without wearing goggles and prevent animals from catching the laser spot. Comes with a steel pad that can protect the table from laser damage, and isolate fire hazards..
  • 【Wide Compatibility】SCULPFUN S9 laser cutting machine compatible with various mature engraving software, such as LaserGRBL (free), LightBurn (paid), Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Mac system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. (You can view the software operation tutorial in the video).
  • 【Solid & Easy-assembly Structure Design】The Laser engraving machine full-metal structure design makes the machine extremely solid, and it improves the accuracy of engraving. The whole....
Check Stock

SCULPFUN S9 Laser Engraver, 90W Effect High Precision CNC Laser Engraving Cutting Machine, High Energy Laser Cutter for 15mm Wood, 0.06mm Ultra-Fine Fixed-Focus Compressed Spot, Expandable Area

  • High Energy Cutting & Ultra-Fine Laser Beam – S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp compressed laser focus spot and 0.01mm engraving accuracy. With super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, 10mm plywood, engraving ceramics and stainless steel..
  • Safety Protection Design – Laser filter cover can filter 98% of UV light to protect your eyes, no need to wear goggles to watch laser engraving and prevent pets from catching the laser spot. Equipped with a power switch to easily turn on, or turn off the machine in case of emergency. A4 size steel pad protects the table from laser damage and isolates fire hazards..
  • Extensive Compatibility & Uses – Compatible various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and engraving file format support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. Engraving materials: wood, paper, cardboard, plastic, PCB board, aluminum oxide, stainless steel, ceramic, stone, etc. Cutting material: wood, acrylic, plywood, fabric, bamboo, plastic board, etc..
  • Expandable Engraving Area & Quality Assura....
Check Stock

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock

ATOMSTACK S20 PRO Laser Engraver,130W Laser Engraving Cutting Machine Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot, Laser Cutter and Engraver Machine Metal Steel Golden Gray

  • More Powerful Engraving: ATOMSTACK S20 PRO is the first 130W semiconductor laser engraving machine. It uses the newest generation of four 6W laser coupling technology to produce the output power soars to 20W. It can cut 15mm thick tung wood board and 8mm thick black acrylic board at one pass and easily cut more than 40 kinds of materials such as 0.05mm thick stainless steel board..
  • More Precise Engraving: ATOMSTACK laser engraver with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area MAKEs the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more deliCATe and natural in the overlay of black and white..
  • More IntelLIGEnt Engraving: We have developed an ATOMSTACK APP to connect to the S20 pro laser engraving machine, supporting Android and Apple mobile phone systems. At the same time, It is equipped with a controller and emergency stop button, so that completely offline engraving can be achieved. You can do your engraving work smoothly and safely even without network environment or computer..
  • More Clean Engraving: The S20 PRO laser engraver is equipped with an upgraded F30 pro air assist kit, which have dual built-in....
Check Stock

ATOMSTACK S20 PRO Laser Engraver with R3 Pro Rotary Roller Kits, 130W Laser Engraving Cutting Machine with Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot for Metal Steel

  • More Powerful Engraving: Atomstack S20 PRO is the first 130W semiconductor laser engraving machine. It uses the newest generation of four 6W laser coupling technology to produce the output power soars to 20W. It can cut 15mm thick tung wood board and 8mm thick black acrylic board at one pass and easily cut more than 40 kinds of materials such as 0.05mm thick stainless steel board..
  • More Precise Engraving: Atomstack laser engraver with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area makes the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more delicate and natural in the overlay of black and white..
  • More Intelligent Engraving: We have developed an ATOMSTACK APP to connect to the S20 pro laser engraving machine, supporting Android and Apple mobile phone systems. At the same time, It is equipped with a controller and emergency stop button, so that completely offline engraving can be achieved. You can do your engraving work smoothly and safely even without network environment or computer..
  • More Clean Engraving: The S20 PRO laser engraver is equipped with an upgraded F30 pro air assist kit, which have dual built-in....
Check Stock

Wristcutters

  • Best Choice for Laser Engraving: LaserPecker 2 Laser Engraver with upgrade galvo technology for faster engraving. Max engraving speed of 1417"/min and frame/graphic preview speed of 8858"/min. 0.05mm compressed spot for more details. 3 resolution options (1K/1.3K/2K) for perfect details level..
  • 360° Rotary/Mobile Engraving: The versatile electric roller enables "Cylinder mode" on cylindrical surfaces like tumblers and pencils. "Slab mode" and "Trolley mode" extend engraving length up to 196" (width remains 4")..
  • Functional & Widely Used: Engraves Paper, Cardboard, Wood, Leather, Aluminum alloy, Coating metal, Brushed stainless steel, etc. Can cut Wood, Paper, Leather (thickness within 0.2"). ATTENTION: light color or transparent material will reflect laser, paint/spray it black before engraved and wipe when jobs done..
  • Easy to Use: Plug and play laser engraving machine with innovative handle design for hand-held engraving. Small size for portability. Connects easily with smartphone or PC. Keep 11cm(4.33") laser distance. File format supports JPG/PNG/G-code and....
Check Stock

Laser Engraver, ATOMSTACK A5 Pro Laser Engraving Machine 0.08 * 0.08mm Compressed Spot Laset Cutter and Engraver, 5W-6W Output Power, Eye Protection Fixed-Focus, 410x400mm

  • Powerful Compressed Laser Spot: Upgraded 40W laser engraver adopts spot compression technology, which makes the light source more concentrated. The normal laser spot is 0.15mm x 0.15mm and the compressed point with us is 0.08mm x 0.08mm. Compared to conventional engraving machines, The high-density laser can easily cut 6mm thick wood and black acrylic.
  • it can directly engrave smooth stainless steel metal and ceramics.
  • New Eye Protection Design: Adopts newly laser protective cover perfectly protect your eyes, a filter UV light for 98%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
  • High-Performance Fixed-Focus Laser: No need to adjust the focus before engraving.
  • the new laser focal spot is 50% smaller than other ordinary lasers, new laser combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. The new knob design allows you to adjust the distance without the aid of tools. It is more convenient and quick.
  • Stable Structure Design: Atomstack A5 Pro 40W machine design with integrated screw rod which can make the fastest running speed reach 11000/min, It is more stab....
Check Stock

Electric Micro Engraver Pen USB Rechargable Engraving Machines With 36 Bits,Portable Mini Engraver Tools, Cordless Rotary Tools Engraved Jewelry Glass Stone Wood Plastic Metal DIY

  • ▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • ▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • ▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • ▶【Widely Compatibility】- The S6 Pro laser engraving machine works well with various engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows/MACs system, engr....
Check Stock