Reviews Laser Drilling Machine

CULPFUN S9 Laser Engraver 90W Effect High Precision CNC Laser Cutter and Engraver Machine Deep Cutting for 15mm Wood 0.06mm Ultra-Fine Fixed-Focus Compressed Spot,

  • ☑️【90W Effect Laser Beam Shaping Technology】SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, it has....
  • ☑️【Solid & Easy-assembly Structure Design】The Laser engraving machine full-metal structure design makes the machine extremely solid, and it....
  • ☑️【Safety Protection Design】The laser cutter and engraving machine is equipped with a very convenient power switch, which is not available in....
  • ☑️【Wide Compatibility】SCULPFUN S9 laser cutting machine compatible with various mature engraving software, such as LaserGRBL, LightBurn,....
  • ☑️【Fast Focusing & Quality Assurance】The S9 laser engraving combines a fixed focus lens and a sliding design. You only need to slide the laser....
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

SCULPFUN S6 Pro Laser Engraver, 60W Laser Engraving Cutting Machine, 5.5-6W Optical Power Laser Cutter for Metal and Wood, Logo Carving Marking Machine, Gifts for Him (S6 Pro Engraver)

  • ... of ordinary lasers, It can cut 10mm thick wooden boards with high-energy and engrave aluminum oxide, painted metal and ceramic..
  • ▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • ▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • ▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • ▶【Widely Compatibility】- The S6 Pro laser engraving machine works well with various engraving software, such as LaserGRBL, Li....
Check Stock

SKIL 6.2 Amp 10 In 5-Speed Benchtop Drill Press with Laser Alignment & Work Light - DP9505-00

  • POWERFUL 6.2 AMP INDUCTION MOTOR—Power through wood, metal, and other materials.
  • 5-SPEED SYSTEM—Take advantage of 5 speeds from 610 to 2800 RPM for different material types.
  • LASER ALIGNMENT SYSTEM—Precisely execute drilling maneuvers.
  • ADJUSTABLE DEPTH STOP—Ensures accurate and consistent depth during drilling.
  • ADJUSTABLE TABLE HEIGHT—Provides easy depth control.
Check Stock

Comgrow Laser Engraving Machine for Dog Tag Metal Wood Silicone,Portable Desktop Laser Engraver Machine Tumblers Leather Glass Acrylic

  • 【MULTIPLE ENGRAVING MODES】The laser engraver machine has FOUR MODES that allow you to enjoy the fun of DIY crafting. ENGRAVE QUICK MODE CAN SAVE HALF OF YOUR TIME THAN OTHER MACHINES. The effect is obvious for sketch pictures or pictures with many lines. CARVE MODE is the normal black and white mode for normal engraving, BUT GRAY SCALE IS MUCH MORE DELICATE THAN THE CARVE MODE, mainly for some patterns with a color gradient, the software can control laser light power through the color gradient..
  • 【PERFECT APP AUXILIARY FUNCTIONS THROUGH BLUETOOTH】Do not know how to control our app and machine? we have detail user guide in APP to help you enjoy the laser engraving tool.It has the functions of text editing, photography, photo album, material library, eraser and manual resizing. Engraving mode: bitmap engraving, bitmap grayscale engraving, contour cutting, black and white image, grayscale image, stamp. Operating system: Windows, Android, iOS (computer software can be compatible with Mac OS).
  • 【STRONG COMPACT LASER ENGRAVING CUTTING MACHINE】 1600mw German OSRAM unique laser chip Mini laser Carving Tool for metal cups. The output power of the laser head is stable and can work continuously for more than 10,000 hours. The engraving depth reaches 2mm....
Check Stock

farway Multifunction Laser Level with Electric Drilling Dust Collector Bubble Levels for Picture Hanging Hands-Free Vacuum Drill Dust Extraction Tool

  • 【Multifuction 3 in 1 Laser Alignment Tool 】 The laser type is Class 2, MAX OUTPUT.
  • 【Electric Drill Dust Collector with Laser Level】 This premium cordless dust collector and ensures 100% clean and debris-free drilling every time!....
  • 【L-Shape Wall Bracket】 Specially designed to offer you the ultimate in convenience and comfort, this lazer leveler tool is very easy to use in....
  • 【Type-C Recharge Battery】 The level tool is equipped with 1800 mAh battery,which eliminates the trouble of replacing the battery and can be....
  • 【Wide Application 】It can be used not only as an electric drill dust collector, but also as a laser level . Dust collector can be used separately....
Check Stock

ER32 Collet Holde Carbon Steel MT4 ER32 M16 Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench

  • ER straight extension rod, long shaft, suitable for deep hole machining. Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • Straight-type handle body for holding small drilling, milling tools..
  • You can reduce the use of longer tools, which can reduce costs and improve efficiency..
  • Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
Check Stock

BILT HARD 12 inch Variable Speed Drill Press, with Laser & Worklight, 5 Amp Benchtop Drilling Machine

  • Powerful: CSA Certified, 12" swing, 3-1/8" spindle travel, 5/8" keyed chuck, 1/2hp induction motor 120V.
  • Variable Speed: from 580 to 3200 RPM with LCD display (ONLY adjust speed after POWER ON)..
  • Laser Precision: X-pattern laser for accurate drilling (adjust the laser before using)..
  • Worklight: with onboard work light, light up the work area..
  • Worktable: the worktable can rotate 360°, bevel 45 degree left & right..
  • Sturdy Construction: the cast iron base ensures durability, with predrilled holes for easy mounting to the benchtop or work surface..
  • WARRANTY - We guarantee this product to be free from defects in materials and workmanship 30 days from the date of purchase. Our support team is on standby for YOU..
Check Stock