Reviews Large diameter Cap Nuts

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.

...0 bike nuts, 4 pieces of bike axle washers about 10 mm/ 0.39 inch, 2 pieces of bike axle washers approx. 8.5 mm/ 0.33 inch, various in sizes and sufficient in quantity, enough to meet your replacement needs of bicycle parts.
Size Information: this M 8 flange nut is about 0.6 inch in overall width, 0.31 inch in inner diameter, 0.24 inch high, matching with safety washer approx. 0.33 inch, suitable for bicycle front axle.
The M 9.5 nut is about 0.71 inch wide, 0.4 inch in inner diameter, 0.6 inch high, with safety washer about 0.39 inch, nice for bike rear axle, and the M 10 nut is about 0.71 inch in overall width, 0.4 inch in inner diameter, 0.28 inch high, with safety washer about 0.39 inch, nice for middle axle.
Choosing Desirable Size: please measure the size of the bike axle and choose the right bicycle wheel nut, you can mark the axle with paper and measure the circumference of the circle, you can also use calipers to measure the diameter.
For example, M 10 nuts are applied for front axle and rear axle of mountain bike, children's bikes and lady's bikes generally use M 8 nuts for the front axle and M 10 nuts for the back axle.
Simple to Store and Use: these bicycle parts are packed in 1 box, convenient for you to store and carry, saving space, and y....

The cooler drain plug is equipped with a leak-proof gasket, which is tightly sealed to prevent leakage, and the cap is retained to help prevent the cap from being lost..
Cooler plug is made of high-quality plastic material, odorless.
resistant to dirt, can keep the drain hole of the cooler clean..
Drain cover total length 3.9 inches/10 cm, gasket diameter 0.8 inches/2 cm, nut length 1.3 inches/3.3 cm..
The cooler drain plug is equipped with a leak-proof gasket, which is tightly sealed to prevent leakage, and the cap is tied to help prevent the cap from being lost..
There are 2 drain caps, 2 nuts and 2 washers in the package. Please check whether this product is suitable for your cooler before buying..

Changes to the diameter of the rear axle outer wheel (pictured) will require corresponding change to diameter on the rear axle inner wheel (not pictured).
Matte black painted finish and center cap.
Lifetime structural and a one-year finish warranty against peeling or lifting of finish.
Lug nuts are not included with wheel purchase.
Pictures are meant to show the style of the wheel not necessarily the bolt pattern – please refer to product specifications below for exact product information.

225 Pcs M5 Hex Socket Button Head Cap Screws, Thread pitch 0.8 mm, Thread size ( diameter ) : 5 mm ( precise data: 4.901 ± 0.075 mm ), Thread Length 6 ~ 30 mm: M5 x 6, M5 x 8, M5 x 10, M5 x 12, M5 x 14, M5 x 16, M5 x 20, M5 x 25, M5 x 30.
Strength Grade of Screws: 10.9 Grade, Tensile Strength: 1040 N/mm², Hardness: HRC 32-39.
Material of Screws: Alloy Steel, Black Oxide Finish, High Strength And Anti-rust.
225 Pcs M5 Hex Nuts,Thread pitch 0.8 mm, to Meet Different Applications.
Material: Alloy Steel, Black Oxide Finish with Anti-rust Oil.
1 Pcs Hex Key, Hex Size: 3.0 mm, to Drive These Screws Conveniently and Easily.
Material: Chrome-Vanadium Steel, Nickel Plated, Higher Strength And Anti-rust.
Package: 225 Pcs M5 Hex Socket Button Head Cap Screwss, 225 Pcs M5 Hex Nuts and 1 Pcs Hex Key Come in a 18-Grids Organizer Box, Organized Conveniently and Easily.

574 Pieces - High Quality 18-8 (304) Stainless Steel Hex Cap Screws Bolts & Nuts & Washers.
1/4-20", 5/16-18", 3/8-16" Coarse Diameters Included.
Includes: Durham 24 Hole Steel Compartment Tray (Made USA) Dim: 13-3/8"x9-1/4"x2".

Compatibility: for vehicles with wheel studs requiring M12x1.5 thread and wheels that take a conical / cone seat.
Specifications: M12x1.5 thread pitch, closed end cone / conical seat style lug nuts, dual hex key included. 1.38" long locking lug nuts with Chrome finish..
Include 20 lug nuts M12x1.5 and 1 Dual Hex Spline Key.
1.38" Long 2 Piece Design lug nut The 2-piece design refers to a thin metal cap on the Lug Nut that protects against false torque readings resulting from the wheel stud contacting the inside of lug nut prior to seating with the wheel..
Small Diameter lug nuts are heat-treated for the perfect blend of strength and style. External pattern design produces better torque and prevents breakage..