Wheeler Scope Ring Alignment and Lapping Kit 30mm

Check Stock

Shapton Naoru Cast Iron Lapping System

  • Large 10 x 4 inch surface laps sharpening stones with ease and speed.
  • Size: 10 x 4 x1 inch (250 x 101 x 28 mm).
Check Stock

Shapton Glass Stone Seven

  • Includes 3 Shapton Glass Stones in 500, 2000 and 30,000 grits (25, 6.7 and .44 micron).
  • Stone Holder, Diamond Lapping Plate and Storage Box.
  • Stone Size: 160 x 37 x 12 mm - (6.3 x 1.45 x .47 inches).
  • The highest quality sharpening stone set we've seen. Exactly what you would expect from Shapton!.
Check Stock

Wheeler Rifle Receiver Lapping Tool for Gunsmithing Cleaning Rebuild and Maintenance

  • INCLUDES: Flex driver shaft, steel lapping bar, and 220 grit lapping compound.
  • EASE OF USE: Ensure a perfectly square and true surface to help you achieve an accurate, high performing firearm.
  • DESIGN: Steel construction with a black oxide finish.
  • CONVENIENT: Compatible with battery-powered or electric drills.
  • FUNCTION: Helps align the gas tube through the barrel nut holes and alignment of front and rear A2 sights.
Check Stock

Taytools 279144 One Piece 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a piece of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 279151 Two Pieces 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a 2 pieces set of of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 279168 Three Pieces 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a 3 piece set of of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Wheeler Engineering Receiver Lapping Tool with Steel Lapping Bar and 220 Grit for Gunsmithing, Barrel Installation, and Accuracy

  • INCLUDES: Flex driver shaft, steel lapping bar, and 220 grit lapping compound.
  • EASE OF USE: Ensure a perfectly square and true surface to help you achieve an accurate, high performing firearm.
  • DESIGN: Steel construction with a black oxide finish.
  • CONVENIENT: Compatible with battery-powered or electric drills.
  • FUNCTION: Helps align the gas tube through the barrel nut holes and alignment of front and rear A2 sights.
Check Stock

Wheeler 600 Grit Bore Lapping Compound 1 oz Jar of High Quality Abrasive Paste for Bore Lapping Firearms Gunsmithing

  • SPECS: 1oz jar of 600 grit (polishing) lapping compound.
  • FUNCTION: Used for lapping the bore of a firearm, bolt face, bolt lugs and other applications where a perfect final fit or a lapped smooth surface is....
  • VERSATILITY: Offered in three grits 220 (cutting), 320 (smoothing) and 600 (polishing).
  • CONVENIENT: Repeating the process using progressively finer grits will produce a significantly smoother bore.
  • BE PREPARED: Stir the contents if they are seperated.
Check Stock