Reviews L Tec Welding And Cutting Systems

Welding Blanket Heavy Duty Fiberglass Fire Blanket Protect Work Area from Sparks (60 x 40 inches)

  • MAIN MATERIAL and FEATUR : Can be used as welding blanket or emergency survival fire blanke.
  • 100% FLAME RETARDANT :These welding blankets are the most reliable protection against heat, sparks and splatter for vertical and horizontal surfaces..
  • PREMIUM PROTECTION - Specially treated fiberglass makes the blankets heat resistant until 1400°F / 750°C. For heavy duty welding or cutting, or as personal and material protection..
  • WIDE RANGE APPLICATION ：This heat resistant features and excellent quality make it useful for Welding, Cutting, and so much more. Widely used for draping over equipment or floor surfaces in welding areas,or as a vertical shield to protect from sparks,spatter,and slag.
  • MORE THAN BIGGER：The 60 inches x40 inches welding blanket protects your workplace from hot coals, open flames, grinding debris, welding sparks, hot kitchen ware, hot cooking steam and sharp objects..
Check Stock

Welding Helmet, Breathable Welding Helmet Protection Mask with Lens,for High Welding Operation Temperature

  • WELDING MASK -- cowhide welding mask, auto-darkening welding helmet, welder mask, protective gear for welding and welding, cowhide face protection..
  • DUAL-MIRROR DESIGN -- The inner and outer dual-mirror design, the outer mirror can be turned up, anti-arc, at the same time, the inner mirror is splash-proof, also detachable, and solar goggles can be installed..
  • TRIPLE PROTECTION OF THE FACE -- the outer mirror can prevent arc light, and the cowhide mask can fully heat insulation to avoid stuffiness. At the same time, it can prevent welding slag, cutting slag and other easy eye debris..
  • COMFORTABLE WEARING -- It is equipped with a sponge cushion, which is soft and comfortable, and the lens is easy to remove. At the same time, the velcro adhesive design makes it more convenient to wear and not easy to take off..
  • SIZE NOTICE -- Welding helmet has a diameter of 20cm, a length of 30cm, and a skirt of 39cm. It can basically use all body types. It can be used as a protective tool for electric welding, argon arc welding, grinding, cutting, etc..
Check Stock

Auto Darkening Welding Goggles Solar Power Welder Eyes Glasses with Adjustable String Anti-Fog Anti-Glare Welder Glasses Mask Helmet

  • [Professional Welding Goggles]: This solar auto darkening welding goggle features anti-ultraviolet, infrared radiation, anti-glare, can well protects....
  • [Auto-Darkening Welding Glasses]: The solar auto darkening welding goggles automatically changes from a light state to a dark state when an arc is....
  • [Adjustable Lens Leg And Glasses String]: The glasses lens is made by high quality PC material, has a good performance with anti-scrapping.
  • [Well Protection]: The welding goggle provides a degree of eye protection while some forms of welding and cutting are being done. It is intended to....
Check Stock

FLASLD FLASLD Acrylic Coated Welding Blanket,Fireproof Fiberglass Fire Blanket, Welding Curtain for Industrial and Home Use (6 ft x 8 ft, Yellow)

  • FLASLD acrylic welding blanket is used in welding, cutting, laser welding, and soldering. It has a temperature resistance of 1472 ℉, which can effectively resist welding slag, cutting sparks, and flames. It can protect your important equipment and workshop from Damaged by welding slag or high temperature..
  • Do you know what is the most troublesome thing in the use of the welding blanket? Yes, it's the tiny glass fiber debris, it's almost an unavoidable problem, it will irritate the skin and cause itching, if you accidentally inhale it, it will also cause damage to the lungs, FLASLD coats the acrylic on the welding blanket, the acrylic and fiberglass are tightly bonded together, there is no fiberglass debris, no itch and lung damage!.
  • The FLASLD acrylic welding blanket is made of 0.5mm thick alkali-free fiberglass cloth and coated with acrylic on both sides. Compared with ordinary welding blankets, it has higher temperature resistance and is more durable, It weighs 600g per square meter, is lightweight, foldable and easy to carry..
  • We have added multiple grommets to the edge of the FLASLD acrylic welding blanket, it is easy to hang and fix, it can be used as a welding curtain to block welding arc light and welding slag, we provide 5 sizes and two colors....
Check Stock

QTP 520009 2009-2018 Ram 1500 5.7L Aggressor Electric Cutout Pipe

  • 2009-2018 Ram 1500 5.7L Aggressor Cutout Pipe.
  • The Aggressor is an Electric Cut Out pipe kit that is vehicle specific. We designed each application for the best clearance, sound and power. There’s no need to figure out your install location. All of the guess work has been done for you. Most kits eliminate the need for any welding at all..
  • Go from factory quiet to Aggressor riot! Simply bolt in and unleash hell..
  • All systems are stainless steel for clean look and made in the USA..
  • Fits 2009-2018 Ram 1500 5.7L Aggressor Cutout Pipe.
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
  • Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
  • PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....
Check Stock

SÜA Oxygen and Acetylene Gas Cutting, Welding and Heating Set - Medium Duty Torch - Plastic Box - Model: Wyvern V

  • This Set includes: Oxygen and Acetylene Regulators, Medium Duty Torch with Model: 3-101-1 Acetylene Cutting Tip Compatible with Victor, 3 x W-1 series Welding Tips, Heating Tip, 15 feet Twin Hose, Single Flint Striker, Oxyfuel Goggles, Tip Cleaner and Spanner..
  • Can cut up to 6” with additional tips and up to 1” with the provided #1 tip. – Can weld or braze up to 1/2” with additional tips and up to 1/16” with the provided tips..
  • Acetylene Tank Connector: CGA-510 Fits Big Acetylene and Propane tanks EXCEPT Small Sizes MC and B (check all pictures for reference) - Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • Cutting attachment is compatible with Victor series 3 Acetylene and 3-GPN Propane Cutting Tips and Series 100 Handles. The Torch Handle is Compatible with W-1 Acetylene Welding Tips, MFA-1 Series Acetylene and MFN-1 Series Propane Rosebud Heating Tips..
  • This heavy-duty oxyfuel cutting and welding set is manufactured using high quality, strong materials. Durable and sturdy it is perfect for amateurs, DIY´s metalworker, or seasoned professionals, for industrial, farm, or home applications. Can be used on various processes such as welding, soldering, brazing, riveting, cutting, hard-facing and metal heating process..
Check Stock

Victor Technologies 0384-2691 Medalist 350 System Heavy Duty Cutting System, Acetylene Gas Service, G350-15-300 Fuel Gas Regulator

  • Gas Service: Acetylene, Oxygen Regulators: G350-150-540, Fuel Gas Regulator: G350-15-300.
  • Welding Nozzle: 2-UM-350.Maximum Cutting: 8 inches.Maximum Welding: 3 inches.
  • CA411-1 Cutting Attachment.Cuts up to 3/8" / 12.7mm 6" / 76.2mm with optional tips.
  • industries-Industrial and general fabrication, light fabrication, repair and maintenance,structural steel fabricationDescriptionThis heavy/medium duty system cuts up to 3/4" (19.1 mm) or 6" (152.4 mm) with optional tips. It welds up to 1/8" (3.2 mm) or 3" (76.2 mm) with optional nozzles. Includes: Heavy duty construction.
  • WH411C torch handle with built-in check valves.
Check Stock

Welding Torch Nozzle Tip Cleaner 21Pcs Stainless Steel Gas Welding Cutting Nozzle Tip Cleaner with File 3inch*5.1inch for Soldering Welding

  • VARIOUS SIZES TIP CLEANER: 21pcs nozzle cleaners are enough for using with stable performance. Comfortable in use and quality assured design, suitable for a variety of occasions, can provide you with a lot of convenience.
  • VERSATILE WELDING TIP CLEANER: The stainless steel tip cleaners are used to clean welding and cutting nozzles to restore nozzle performance. Lightweight design, compact size, portable and practical.
  • HIGH QUALITY NOZZLE CLEANER: This welding nozzle tip cleaner adopts high quality stainless steel material, which is characterized by durability, wear resistant in use, long lifetime service.
  • PORTABLE CUTTING TIP CLEANER: There is a 21pcs welding nozzle cleaner and 1pc file in a aluminium box which is convenient to carry. High quality for durable and long-lasting use.
  • WIDE APPLICATION TIP CLEANER: This welding torch nozzle tip cleaner is suitable for soldering pins, dredging the contact tip and cutting tip. Simple and reliable in general applications.
Check Stock