Reviews Kwh Meter Series

Upgraded Watt Meter Power Meter Plug Home Electricity Usage Monitor, Electrical Usage Monitor Consumption, Energy Voltage Amps Kill Meter Tester with Backlight, Overload Protection, 7 Modes Display

  • 【Various Monitoring Parameters】: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time..
  • 【Upgraded LCD display】: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers. Backlight time: 10 minutes..
  • 【Overload protection】: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function"....
Check Stock

Leviton 800-5372-8K 30 Amp Flush Mount Dryer Receptacle

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

MNJ MOTOR DC Battery Monitor Meter 0-200V 0-100A LCD Display Digital Current Multimeter Voltmeter Ammeter w/Current Shunt Wiring Kit Set for Cars RV Solar System

  • 1.Battery Monitor Meter 9 in 1 Measurement Functions : One interface displays 9 kinds of measurement parameters at the same time, including Voltage(0-200V), Current(0-100A), Power(0-20000W), Impedance( 0-1000Ω), Internal Resistance(0-999mΩ), Capacity(0-1000AH), SOC, Energy Consumption(0-9999kWh) and Running Time(0-999h).
  • 2.Better Visual Experience : LCD HD display, 360° viewing without dead angle, with backlight function, it is clearly visible whatever day or night. Through battery monitor meter, you can better monitor the real-time data of your battery and use it with more peace of mind..
  • 3. No Screw Installation : LCD display digital current multimeter adopts the installation design of the push-on terminal, it is easy and convenient to install and remove the wires without the screws.（Pls read the instructions carefully and strictly follow the wiring diagram before installation.）.
  • 4.Accurate Measurement : 100A DC battery monitor meter is controlled by a high precision chip,efficient and stable operation, safe and reliable welding process, measurement accuracy reaches 1%.
  • 5.Wide Application : Battery monitor meter wildly used in the automobile, solar system, industrial assembly line, trailer,RV&boat ect..
  • 6.MNJ Motor provides you 30-Days Money Back....
Check Stock

Surecom SW-102HF 1.5-70MHz V.S.W.R. & Power Meter

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

DAE V-75 Vertical Water Meter, 3/4” NPT Couplings, Measuring in Gallons

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

AUTENS AC Digital Meter AC 80-260V 100A Current Voltage Power Energy Panel Monitor (AC 100A Meter with Split Core CT)

  • MULTIFUNCTIONAL DIGITAL MULTIMETER: With a large-screen LCD display interface, it can display six parameters at the same time, including Voltage Current Active Power Energy Frequency and Power factor at the same time. Measuring Voltage range AC 80V-260V.
  • Power Factor range 0-1PF. It will be more convenient to install with a split current transformer..
  • OVERLOAD ALARM FUNCTION: Backlight and power will flash simultaneously to give an alarm if active power value exceeds the preset value. Alarm value can be set by yourself, but applied load should not exceed the rated power. This AC digital meter is suitable for indoor, please do not use outdoor..
  • POWER-OFF DATA STORAGE FUNCTION: The last test data is stored automatically when the power supply abruptly lose. No More worry about data loss due to sudden power outages. This digital meter can only measure the Active Power but not Apparent Power. If you measure power from a DC-AC inverter, please make sure it’s PURE SINE WAVE, or the meter can be burnt or melted..
  • ONE-BUTTON CONTROL: The button can be used to control the backlight, reset energy and preset power alarm limit. Short press the key to turn on or off the backli....
Check Stock

Leviton 1K240-1SW Series 1000 120/240V 100A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Leviton 1K240-2SW Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

BAYM 10pcs/Box 5(32) A 120V 60HZ Single Phase Din Rail KWH Watt Hour Din-Rail Energy Meter LCD KWH 32A

  • Measuring Energy Range:9999999.1kwh Counter :7+1 digits.
  • Dimensions: 116*59*17.5mm=4.5*2.3*0.68 inch(H*D*W).
  • Package included:1pc of Din rail single phase two wire energy meter & 1pc of User manual (English version).
Check Stock