Reviews Keg Valve

VINCI Nitro Cold Brew Maker Stainless Steel Home Brew Nitrogen Infusion Coffee Keg System Easy One Handed Dispensing System Includes Drip Mat

  • ... (8g N2O cartridge) as it streams from the tap. Infusing cold brew coffee with nitrogen creates a velvety, smooth coffee with a delicately sweet flavor and a rich, creamy foam head..
  • INCLUDES: 2.0L food-grade stainless steel Mini Keg, Tap Assembly, Bar Mat, Pressure Relief Valve, Spear with Pressure Relief Valve, Cartridge Holder, Stout Handle Cap, Easy Dispense Stout Handle, Stout Faucet, Pick Up Hose, Faucet Wrench, Large Keg Brush, Small Faucet Brush, Detailed Instruction Manual. For best results, use N20 cartridges (sold separately).
  • THE VINCI DIFFERENCE: The Vinci Nitro Cold Brew is the only nitro cold brew system to include our counterbalanced Easy Dispense Stout Handle for one-handed use. The Vinci Nitro Cold Brew System also includes a spill mat for inevitable drips..
  • EASY TO USE: Fill Pour 1.1L (1100 mL) of cold brew coffee into the Mini Keg (or about 50%-70% full. Insert the assembled spear system. Infuse with 8g Nitrous Oxide (N2O) cartridge. Shake mini keg, chill, and enjoy! (see included manual for full instructions) The sealed Vinci Mini Keg will keep your nitro cold brew sealed and infused with N20 and fresh ....
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit

  • DUAL GAUGE REGULATOR: This Kegco 542-2 Commercial Grade Double Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth ope....
Check Stock

Manhattan Wired Membrane Gaming Keyboard – with Backlit RGB LED, USB-A Connection, Quiet Keystrokes, 12 Multimedia Function Keys - for Computer, PC, Desktop, Gamer – 3 Yr Mfg Warranty - 180603

  • Allows you to hook up your Tapcooler counter pressure bottle filler to your keg, vs the faucet..
  • Includes close to 78 in. of tubing so you'll have plenty of clearance from your Keg to your bottling area..
  • Included valve hooks right up to the Tapcooler and is to open and close as you fill your bottles..
  • Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling!.
Check Stock

TMCRAFT 128OZ Stainless Steel Mini Keg, Portable beer growler with Exhaust Valve Designed Cap to Keep Beverage Fresh

  • 128OZ CAPACITY: Portable size is easy to transportation and storage. Measures 5.3"L x 5.3"W x 13"H & fits your home cooler/fridge.
  • EXHAUST VALVE DESIGN: Homebrew beer produces carbon dioxide during fermentation and storage, and the pressure in the bottle drops, making it very difficult to open. The design of pressure relief valve can control the pressure inside the bottle, easy to open.
  • STAINLESS STEEL MATERIAL: All accessories including kegs are made of food grade 304 stainless steel which keep beer flavors and fresh.
  • INNER THREADS: This mini keg to be used with a mini keg dispenser and ball lock MFL disconnect set, allow you to make carbonated beverage.
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations.
Check Stock

TAPRITE E-T742 CO2 Primary Beer Dual High Pressure Gauge New - CGA 320 Inlet 5/16' Barb Shutoff (Brass Body)

  • Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge..
  • Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve..
  • Gray Plastic Bonnet for Easy Pressure Adjustment..
  • Co2 Keg Brass Beer Double Gauge Regulator..
Check Stock

Tapcooler Beer Valve Connector for Direct Keg Connection

  • ... in barb & 3/16"' liquid out barb setting, allows air and beer line connection end closely to attach to coupler, Also comes with hose clamps and extra connection sealing tape to tighten hose and seal the barb further avoiding any possibility of leaking. Features fully integrated 55-PSI pressure relief valve as well as a ball check valve which prevents back flow of beer and can be easily removed for cleaning..
  • EFFORTLESS INSTALLATION: This coupler is easy to operate, you just need to simply push down and turn to properly couple the keg. Compared to handle-type low profile coupler, this low profile coupler avoids the space of operation handle and is designed with a 90° hose barb allowing one hand control in tight dispensing locations, allows more consistent pours & less foaming of your beverage dispensing..
  • SPACE SAVING: Low profile D system coupler features a space saving design, it has a flat head, the hose will be in a parallel connection. Compared to the basic normal size keg coupler, this coupler will save several inch of vertical height to fit narrower space in your refrigerator.solves problems of clearance issues that a lot of standard tall c....
Check Stock

CO2 Kegerator Regulator,Beer Keg Regulator,Dual Gauge CO2 Draft Beer Regulator,0-60 PSI Working Pressure,0-3000 PSI Tank Pressure,Beer Regulator with Safety Pressure Relief Valve

  • ...ator ensure fast and stable transmission without leaking. All you need to install this beer keg regulator is an adjustable wrench. Always place a washer between the lock-down nut and the tank to ensure a tight seal..
  • 【PROFESSIONAL GRADE】Easy-to-adjust large knob, easy-to-read dual-gauge with 45 PSI safety relief valve and gas shut-off valve, Our regulator for kegerator, which has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants..
  • 【HEAVY DUTY & DURABLE】CRBrewBeer CO2 Pressure Regulator for Draft Beer is a heavy duty unit, constructed of forged premium brass with all brass connections and components and features a sintered brass inlet filter, integrated nylon tank connection washer (and spare). Regular replacement of washers ensures long-term use..
  • 【LIFELONG WARRANTY】Each CRBrewBeer keg regulator is backed by unbeatable quality, reliable customer service, and a trusted guarantee. this CO2 Keg Regulator Enjoys 45 Days Money-back, 18-month Worry-free Warranty and Lifetime Technical Support. Any question, please feel free to contact us by email directly..
Check Stock

BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit

  • ...e Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly....
Check Stock

Kegco Standard Double Faucet Tower Kegerator Conversion Kit No Tank - STCK2-542-2_NT

  • PRO SERIES DUAL GAUGE REGULATOR: This Kegco 542-2 Pro Series Two Product Dual Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense two kegs at the same pressure! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DUAL FAUCET DRAFT BEER TOWER: This 3″ diameter air-cooled chrome-plated metal draft beer tower comes complete with two NSF-approved chrome-plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5′ lengths of 3/16″ I.D. beer line extend from the bottom of t....
Check Stock