Reviews Jst Xh 25

Blomiky 2 Pack 8.14Wh 7.4V 1100mAh 35C Li-ion-Po Battery with JST Plug for Wltoys A949 A959 A969 A979 A320 A321 RC Truck Cars and K929 RC Helicopter Airplane A959 Battery 2

  • Discharge plug:Red JST connector, plug end cross-section size:5.55*3.0mm/0.218*0.13inch. Red cable pin is positive, black cable pin is negative, make sure yours is same as this one. Don't be reversed..
  • Battery dimensions:: L52*W29*H19mm/2.3*1.15*0.75inch . Weight: 55g/1.95oz, Discharge rate: 35C. Charger plug: XH-3P ..
  • Material: lithium polymer Li-ion-polymer.
  • Discharge: 35C. 7.4V 1100mAh JST plug battery fit for Simrex A320 A321 RC Car..
  • 7.4V 1100mAh JST Li-po rechargeable battery for Wltoys A949 A959 A969 A979 K929 Rc Cars Trucks, not fit this model B version..
  • USB Charger built-in intelligent over-charged protecdtion IC board, USB charger cable green light is blink when charging, green light stop blink after full charged. ensue your safe charge and using..
Check Stock

HQProp 32pcs 31mm 3-Blade Props with 1.0 mm Shaft Micro Whoop Drone Propellers for Tiny Whoop FPV Racing Whoop Like iFlight A65 Quadcopter(Grey and Transparent Blue)

  • The USB plug can be connected to the computer, mobile phone charger, mobile power supply for battery charging, easy to use..
  • Can be used with XH2.54 revolving JST bus conversion cable, and it can charge 3.7V lithium battery through JST plug, which is more widely used..
  • The 3.7V lithium battery can be accurately charged, and it will automatically stop charging after being fully charged without overcharging..
  • Safe to use, just connect the USB cable to the device to charge normally without monitoring..
  • Small size, easy to carry, allowing to charge the battery anytime and anywhere, suitable for X5C, 818a, X1, X4, HS170, X300, X400, F181, F180 quadcopter, etc..
Check Stock

PowerHobby 3S 11.1V 5200mAh 50C Lipo Battery w XT90 Connector Fits : Arrma Kraton Nero Tyhpon Senton Tailon OUTCAST FAZON

  • Application(s): 1/10 / 1/8 scale cars, trucks, and buggies Boats.
Check Stock

Tenergy Airsoft Battery 8.4V 1600mAh NiMH Stick Battery High Performance Stick Style Batteries w/ Mini Tamiya Connector, Replacement Battery for Airsoft Rifle AEG Guns AK47 CYMA RPK PKM

  • 【Professional and Reliable】: BosLi-Po focus on developing and manufacturing High-end lipo battery, always be strict with product quality, all of the batteries comply with RoHS and CE quality testing standards，worry-free of safety..
  • 【High Quality and Efficacy】: The BosLi-Po airsoft rechargeable Lipo battery is made from high-quality Lipo cells and has a really good rate of fire，25C high discharge airsoft lipo battery pack that will provide you with an increased rate of firepower and a rapid trigger response time..
  • 【Battery Specification】: Battery Voltage: 11.1V, Capacity: 1100mAh, Cells number:3, Discharge Rate: 25c, Charge plug: JST-Xh, Discharge plug: Deans-T. Airsoft lipo battery dimensions: 4.13"(Length)*0.78"(Width)*0.59"(Height), Weight:0.17lb.
  • 【Universal Compatibility】: Compatible with popular models of airsoft guns: M4, Crane Stock, M240B, M60, G36, M14, RPK, PKM, L85, AUG, G3, upgraded or modified AEGs,M110, SR25, AK47, MP5K, XMP5, SCAR, M249, and other series and models..
  • 【Long Battery Life】：11.1v lipo battery airsoft with 3 fold protection, high quality batteries cores, long cycle life, which gives you an excellent experience of long endurance..
Check Stock

HRB 2pcs 6S 5000mAh 22.2v 50C-100C with EC5 Plug RC Lipo Battery Compatible for RC Quadcopter Airplane Helicopter Car Truck 500 600 Helicopter (6.1×1.89×1.89inch)

  • Superior Japan and Korea Lithium Polymer raw materials..
  • Chemistry: Li-Polymer, Cells Number: 6S, Voltage:22.2V, Capacity: 5000mAh, Connector Type:EC5.
  • Size(L*W*H): 6.10*1.89*1.89in / 155*48*48mm (0 - 3mm difference), Weight: 1.6lb / 25.57oz / 725g (± 2g).
  • Applications: Compatible with MIKADO LOGO500, ALIGN T-REX550/600, GAUI X5, Outrage 550, Hirobo SDX, large multirotors, EDF Jets, 600 to 700-size helicopters.
  • Kindly Note: Don't over charge more than 4.2V and don't over discharge below 3.7v (if you have any questions, please feel free to contact us, we will solve it for you asap).
Check Stock

Readytosky JST-XH Balance Board 2-6S Lipo Battery Charger Extend Expansion Board Adapter Converter(2PCS)

  • ★Works with 2S - 6S batteries with a JST-XH balance plug..
  • ★Expand the charging capabilities of the X4 charger..
  • ★Works With Most Lipo Battery Chargers..
  • ★The adapter plugs into the 6-cell balance port on the charger, and breaks out into the 2S, 3S, 4S, 5S and 6S connectors..
  • ★With this adapter, you get a One-size-fits-all module that will work with any battery from 2 cells up to 6 cells..
Check Stock

Engineers Precision Crimping Pliers PA-09 Best Made Precision Crimping Tool for AWG32-AWG20 Wires across 80 Different Pins & D-Sub Connectors Contacts, Oil-Resistant Grip (PA-09)

  • Perfectly crimps pins such as JST ZH, PH, XH, SH/SHL series, MOLEX KK, Picoblade series, etc..
  • crimps AWG32~AWG20 wires across 80 different pins (& D-SUB connector contacts) from the main crimp pin manufacturers.
  • professional results (& at a fraction of the price as charged by the Pin Vendors for their specific crimping tools).
  • capable of crimping 1.25 to 2.5mm pitch connector pins (narrow-pitch).
  • 4 crimping die widths - 1.0mm, 1.4mm, 1.6mm & 1.9mm.spring loaded handles for easy operation (handles latch shut for storage).oil-resistant TPR (thermoplastic rubber) grips for unmatched comfort (strap holes at end of handles).light & compact body for fatigue-free work.original joint-screw by "ENGINEER" allows for quick & easy maintenance.made in Japan (ROHS Compliant), constructed from S55C Carbon Steel.
Check Stock

HOBBYMATE Battery Parallel Charging Board Plate - for RC Hobby Battery Charger 2-6S w/ XT60 Plug

  • 1. Less Charging time means more flying time, this Parallel Charging Board Make it possible of simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types) in parallel.
  • 2. The charging time is significantly reduced since all batteries are balanced at the same time instead of balancing batteries one by one..
  • 3. Features XT-60 for your batteries main leads and JST-XH balance plugs ranging from 2S to 6S..
  • 5.20Z of thick copper foil sustainable resistance to flow 60A.
Check Stock

[Gulfcoast Robotics] HEX EPCOS Thermistor Upgrade for Creality Ender 3 Ender 5 CR10 3D Printers 1 Meter Extension Cable

  • EPCOS Thermistors are the ideal choice for the official Creality firmware. Provides more accurate temperature readings than traditional 100K NTC3950....
  • Creality 1M extension cable includes a 2-pin JST-XH connector that mates perfectly with the board..
  • Fiberglass insulated leads and brass hex stud provide safe usage at high temperatures up to 300° Celsius..
  • M3x0.5 HEX stud threads in to the heater block for quick, secure installation..
  • Silicone insulation ring shields the brass stud from external airflow (e.g. ceiling fans) for stable temperature readings..
Check Stock