2\ Boring Head SET 12 Pcs Carbide Boring Bars MT2 -M10 F1-12 50mm Boring Head With 9pcs 12mm Boring Bars Milling Machine Accessories
- This tool set is made of high quality material, good wear resistance, and durable in use.
- The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
- It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
- This tool set contains boring head,Boring Bars, perfect for the milling machine.
Check StockCHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK
- 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
- 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
- Center Distance bt 2 bottom hole: 0.60"..
- A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
- Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check StockTormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)
- This bundle combines the Tormek T-8 water-cooled sharpening system with the jigs trusted by chefs around the world..
- This Tormek T-8 Chef's Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, and the SVM-00 for small knives. Also included is the SVX-150 for your scissors. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
- The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
- Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
- Note: This low RPM machine operates at 115 volts and is designed to work exclusi....
Check StockKings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included
- JUST USE YOUR DRILL – A hand-held drill now gets the control of a drill press with this steel and plastic jig.
- BORING, IN A GOOD WAY – Angle boring up to 45-degrees is easily controlled and moved in 5-degree increments.
- STANDARD SIZE – 3/8″ shaft and chuck are used for this quick tool conversion while it works smooth with no wobble.
- PRECISE USE – A reliable depth stop is included to ensure each task goes as expected.
- ADD TO TOOL CHEST – This drill guide makes a great addition to any tool chest and is portable for when necessary.
Check StockChainsaw Sharpening Jig Chain Saw Sharpener Tool with 5 Pcs Tungsten Carbide Chainsaw Sharpener Bits Hand-Cranked Chainsaw Chain Sharpening Jig Kit for 4 -22 Chain Saws Keep Chain Saw Sharp
- ...b. The chainsaw sharpener kit include a tool bag with a shoulder strap to hold the chainsaw chain sharpening jig and other chain saw sharpener accessories. And the bag can be hung on the belt or slung over the shoulder, it is very convenient for outdoor working. A set of portable and easy to use chainsaw sharpening tools will increase productivity..
- Easy to Use Chainsaw Sharpening Jig: This manual chainsaw sharpener jig kit is as easy to use as a pencil sharpener. ①Install the chainsaw sharpener bit on the hand crank then thread it into the 30 ° front angle catheter. ②Fix the chainsaw sharpener jig on the chain saw guide plate. ③Turn the hand crank to get sharp teeth. ④After sharpening a tooth, just pull the chain to sharpening the next tooth, and repeat this action until the whole chain is clear again..
Check StockMOSILVERON Wood Drilling Woodworking Hole Boring Bits Set Power Rotary Cutting Tool for 35mm Concealed Hinges
- Bore Clean, Perfect Holes for 35mm Concealed Door Hinges.
- Suitable for MOSILVERON 35mm concealed hinge jig.
- Drilling Diameter: 35mm (1.37") Shank Diameter: 10mm (0.39") / Shank Length: 25.4mm (1").
- Hinge Boring Bit Total Length: 90mm (3.54").
- Spurs create clean hole edges without tearout.
Check StockMoMoSun Sink Bridge Whetstone Holder Sharpening Stone Base Adjustable Expandable No-Slip (Grey)
- The Adjustable Replacement Tool Rest Sharpening Jig will allow you to locate all the basic sharpening positions with your bench grinder (grinder not included). The unique miter slide tool holder design allows the jig to be used more or less as a stone, which easily guides your blades, turning tools and chisels. Solid aluminum construction provides you with a smooth sliding, side to side action when sharpening..
- The sharpening jig works with most power or hand grinders that has or had a tool rest. It is the ideal replacement for the factory tool rest that comes with many bench grinders. The jig offers much more flexibility in terms of what you can get done than with the standard factory tool rest. The plate is offset for short chisels, such as Japanese or western butt chisels..
- The Sharpening jig can be used with 6" or 8" bench grinders and on many belt sanders/grinders. It quickly and easily mounts directly to the bench in front of the grinder with a track style base and can be readily folded out of the way for freehand grinding if so desired. It can also be completely removed by loosening the large wing knob and sliding the jig from the track base..
- Another great feature is that the jig can be adjusted forward and backward for just the right angle....
Check StockBoring Head Shank Cutter Set Boring Bar Tool Set BT30-F1-12-9PCS Boring Cutter High Accuracy Boring Drill Bit Kit for Milling Machines
- Including 9pcs 12.5mm boring cutters, easy to use and replace.
- This tool set contains boring head, boring shank and boring cutter, perfect for the milling machine.
- Main accessories of boring and CNC milling machine, such as coordinate boring machine, horizontal boring machine and ordinary boring machine..
- High quality carbon steel material of the product can provide stable performance.
- There is a storage box which you can store the tools, convenient to carry.
Check StockKreg SML-C2X250-125 HD Pocket Screws, 2-1/2 Inch (125 Count)
- Premium Steel Pocket-Hole Screw: #14 2 1/2-inch coarse thread screws have Maxi-Loc heads for softer materials.
- Accessible Carpenter Tools: Works with Pocket-Hole Jig XL, Jig HD, and 1 1/2 inches and larger stock.
- Sturdy Wood Screws: #2 square drives are easy to drive without slipping.
- Heavy Duty Pocket Screws: Kreg screws have 3-layer Protec-Kote anti-corrosion coating.
- Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check Stock