Reviews Jetson Impact

2 Pack Dedicated DC 5V-12V Cooling Fan for NVIDIA Jetson Nano Developer Kit 3PIN Reverse-Proof Connector 40mm×40mm×10mm Fan

  • 2 Pack Dedicated Cooling Fan for NVIDIA Jetson Nano Developer Kit.
  • Note: Jetson Nano Developer Kit and Acrylic Case are NOT included..
Check Stock

Interesting Stories For Curious People: A Collection of Fascinating Stories About History, Science, Pop Culture and Just About Anything Else You Can Think of

  • ...40VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days Refund. 24 Months Exchange..
  • UpBright New Global 3-Prong Connector 29.4V AC / DC Adapter Compatible with Jetson Extreme Terrain Z12 XT Z12XT Galaxy 25.2V 4.0Ah 25.2 V 4.0 Ah 25.2VDC 4000mAh Lithium-ion Battery Hoverboard Hover Board Scooter Rave By Jetson Board 29.4VDC 1.0A - 1.5A DC29.4V 1A 29.4 V 1000mA 1500mA 29.4 VDC Switching Power Supply Cord Cable PS Battery Charger Mains PSU (w/ 3-Pin 3Pin End Connector).
  • ⚠️(Please Note! that the "Jetson Hoverboard" available in a number of different Models Number and Connectors. Please Make sure Your Model or P/N : Match this Listing. Thank you.).
  • ⚠️!!!Note: Rechargeable batteries don't last forever, the average battery last 1 to 3 years. If the battery is old/dead, it will not accept a charge. But not charger's problem. If you're not sure whether battery or charger is dead or not. You must have a volt meter in order to tell whether or not a charger is working..
Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano

  • Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....
Check Stock

PerfectPrime IR0002, Infrared (IR) Thermal Imager & Visible Light Camera with IR Resolution 3600 Pixels & Temperature Range from -4 ~ 572°F, 6 Hz Refresh Rate

  • Supports CM3/3+/4, Jetson Nano, Jetson Xavier NX.
  • Supports night vision when works with infrared LEDs.
  • Resolution: 3280 × 2464 Lens specifications: CMOS size: 1/4inch Aperture (F): 2.0 Focal Length: 2.85mm Angle of View (diagonal): 79.3 degree Distortion: .
  • 4 screw holes Used for attachment Provides 3.3V power output Supports connecting infrared LED and/or fill flash LED.
Check Stock

GeeekPi New Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (12-Layers)

  • Wide Application --- The new 12-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberr....
Check Stock

waveshare Power Supply for Jetson Nano,100-240V 0.8A AC to DC 5V 4A Power Adapter Converter for Jetson Nano, DC Jack Output OD 5.5mm ID 2.1mm

  • Power supply applicable for electronic products like Jetson Nano.
  • Cable length 1.2m , DC jack output, OD 5.5mm ID 2.1mm.
  • Providing short circuit / over voltage / over current multi protections for Jetson Nano.
Check Stock

Acrylic Clear Case with Dedicated 5V Cooling Fan for NVIDIA Jetson Nano Developer Kit, 4PIN Reverse-Proof Connector PWM Adjustment Fan and Dust Resistance Enclosure

  • The package includes Acrylic Case and Dedicated PWM Adjustment Cooling Fan, for Jetson Nano Developer Kit..
  • The case with Clever opening design,easy access to the peripheral connectors.Nice looking and dust resistance..
  • The Cooling Fan with 4PIN reverse-proof connector.Dimensions: 40mm×40mm×20mm.
  • The Fan supports 5V voltage.PWM Speed Adjustment, Strong Cooling Air..
  • Note：Jetson Nano Developer Kit is not included..
Check Stock

Yahboon Ackerman Steering Structure Smart Robot with Jetson Nano ROS Professionally Programmable Car Kit Rosmaster R2

  • ...the angles of the inner and outer wheels are different, and the turning radius of the inner tire is less than The turning radius of the outer tires can maximize the performance of the robot car..
  • Rosmaster R2 has 3 versions (Standard, Superior, Ultimate), which can be used with 4 development boards (Raspberry Pi 4B, Jetson Nano 4GB, Jetson TX2-NX, Jetson Xavier NX), please pay attention to whether the version you choose includes development board. If you need to reduce the hardware in the kit (eg: depth camera, radar, etc.), contact Yahboom first for assistance..
  • ROSMASTER R2 based on robot operating system. It is equipped with high-performance hardware configuration such as lidar, depth camera, and voice interaction module. It can realize applications such as robot motion control, remote control communication, mapping and navigation, following obstacle avoidance, Autopilot, human body feature action recognition, and voice interactive control. Yahboom will provide tutorials, source code and professional technical support ..
  • Multi-platform linkage: rosmaster X3 supports a variety of remote control methods such as mobile phone APP, handle, ROS system, computer keyboard, etc. It can control your robot car at any time, import your code, and is an artificial....
Check Stock

UpBright 36V AC/DC Adapter Compatible with Jetson Rogue Hoverboard JROGU Light Balancing Scooter Rubber Tires LED Lights Hover board 29.4V Lithium Battery JROGU-BL JROGU-BLK 82071600 JROGU-BLU Charger

  • ...C 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright New Global 36V AC / DC Adapter Compatible with Jetson Rogue Hoverboard Model: JROGU Balancing Scooter All-terrain Rubber Tires LED Lights Hover board 29.4V 29.4VDC 1.55A Max. 4.0AH Capacity Lithium-Ion Li-ion Battery Light Up Wheels JROGU-BL JROGU-BLK JROGU-BLK-C 82071600 JROGU-BLU JROGU-BLU-R 30V-36VDC Switching Power Supply Cord Cable PS Battery Charger Mains PSU ⚠️(with Barrel Round Plug Tip. ❌NOT fit 42VDC version. Please Check For Compatibility With Your Unit. Thanks.).
  • ⚠️ (Note: ✅29.4V is Li-ion battery pack voltage. ❌NOT power supply adapter charger’s voltage. ✅The charger voltage is 30-36V. ❌NOT fit Jetson 29.4V 1000mA Power Adapter. Someone may have bought it by mistake. Please Check For Compatibility With Your Unit. Thanks.).
  • Note: ✅ with Barrel Roung Plug Tip. ❌!!! NOT 3-Prong Connector. ✅ ONLY for Jetson Hoverboard. ❌!!! NOT for Hoover board of other brand name. Someone may have bought it by mistake. Please Check For Compatibility With Your Uni....
Check Stock