Reviews Isolation Transformer

Foundation Engineering USB Data and Power Isolator FEN-0003

【Only USB1.0/USB 1.1/USB2.0 Full-Speed compatible】Please Note: USB 2.0 High Speed Devices are Not Supported.
【Power Isolator Inside 】1W MAX. Low and full speed data rate: 1.5 Mbps and 12 Mbps.
【Application】USB debugging device/A variety of industrial USB devices/Noise sensitive areas..
【Advantage】Combining high speed CMOS and monolithic air core transformer technology, this isolation component provides outstanding performance....
【Package Includes】1x USB Isolator (Please Note:USB 2.0 High Speed Devices are Not Supported, Please Confirm Your Device Carefully and Then....

Two channel adjustable speaker cable to RCA line output converter.
Use the SLOC2 when adding an amplifier to a factory radio to convert the radio’s speaker level output to the low amplifier(RCA) level input.
Utilize audio transformer for noise isolation.
Split pin RCA connector with pure Oxygen Free Copper wire.

OFFERS 3 FUNCTIONS IN 1 UNIT - The LR Baggs Venue DI combines a super low-noise transformer-coupled DI, equalizer with notch filter, and chromatic....
PROVIDES MAXIMUM NOISE ISOLATION - The transformer-coupled DI output enables you to connect directly into a mixing desk's mic input without worrying....
REDUCES UNWANTED FEEDBACK - The Venue DI uses LR Baggs' proprietary Garrett Null anti-feedback notch filter to cut out frequencies that cause ringing....
TUNES YOUR GUITAR ON-THE-FLY - The built-in chromatic tuner allows you tune up your acoustic guitar between songs. The onboard tuner features a....
INCLUDES - LR Baggs Venue DI Acoustic Guitar Preamp. Blucoil Power Supply with Slim AC/DC Adapter for 9 Volt DC 670mA with US Plug (Center Negative....

Current sensing relay for monitoring electrical current.
Current carrying wire is routed through an aperture.
Electrical isolation between circuits (SPDT).
Internal transformer for scaling the current and a voltage reference circuit for a repeatable trip point.
UL Recognized for safety and RoHS compliant for hazardous substances.

It can be used as up-converter, down-converter, two-phase modulator and demodulator or phase comparator.
Passive mixers use GaAs Schottky diodes and novel planar transformer on-chip balun structures.
Passive double-balanced mixer, 8-pin surface-mount plastic package (MsOP).
The passive mixers adopt mini components design,compact and light weight.
The mixer has the advantage of high isolation.

Removes AC noise: The Pyle hum eliminator removes 60Hz AC hum caused by ground loops that act like Radio antennae (loop antenna). breaks the ground loop safely making it impossible for the signal lines to pick up the AC noise in the first place.
Passive device: The noise isolator is a passive device which does not require power to operate. Equipped w/ ¼” TRS phone and XLR inputs and outputs on 2 channels. Automatically converts unbalanced to balanced signal without any signal loss.
Compact design: This noise filter device features a high performance Ultra compact and portable design allowing you to easily bring it anywhere. It has high quality components and rugged construction while maintaining the highest sonic quality.
1:1 ISOLATION TRANSFORMERS: The 1:1 isolation transformer is responsible for breaking the ground loop or the loop antenna that prevents buzz for a clear sound. Also responsible for balancing audio lines. Device accepts mono or stereo connections.

Innovative technologies: a sophisticated technology, applications for various long-term maintenance-free performance. magnetic isolation transformer,....
Input Interlace: 1 / 4 inch TRS. XLR sockets (two feet for the hot side is the female head), and terminal strips Type: Electric balanced / unbalanced,....
> 40dB. typically» 55dB. 1KHz Output interface: 1/4 inch TRS. XLR sockets (two feet for the heat is end. each head), and terminal strips Type:....
CMRR 18d8u. balanced / unbalanced (connected 6000 load) Bandwidth: 20Hz-20KHz. +05 dB/-1Db Frequency response dynamic range: I09d8 115d8 SNR: 90dB....
Range (concealed): Select ± 6dB or ± 15dB fader upgrade/Attenuation Range / LED Output Level: 4-LED indicator strip icon (green, green, yellow, red)....

LOW VOLTAGE TRANSFORMER: LED Driver Power Supply 12V, 36 Watt, Input: AC100-240V, Output: DC 12V, Size: 4.92*1.38*0.91 inches, IP20 Waterproof..
GOOD HEAT DISSPATION: The Constant Voltage LED Driver is made of heat-resistant material and it also has overheating protection device inside. Easy for heat dissipation and ensure stability..
SAFER DESIGN: 120V to 12V Transformer is flicker-free output, thermal overload, over current, over voltage and short circuit protection built in. No noise isolation protection safety..
WIDE APPLICATION: 36W LED Driver can be applied to all kinds of LED devices, such as LED light strips, LED hard light strips, cabinet light, LED display, security camera, LED module, indoor LED deck light, puck light, rigid strip light, G4 bulb, MR11 bulb, MR16 bulb ect..
NOTE: Please confirm the input voltage (AC100-240V) can work in your place before purchase the 12V LED Switching Power Supply, and please make sure the power is not over 36W, otherwise it may burn..