Reviews Interoperability Standards

Dell Networking N3048P - Switch - 48 Ports - Managed - Rack-mountable 462-5881 Renewed

  • Use MLAG for multipath loop-free redundancy without spanning tree to enable full-bandwidth utilization and high availability.
  • Promote greater interoperability through interfaces with Cisco's Rapid Per VLAN Spanning Tree (RPVST+) and devices using Cisco Discovery Protocol (CDP).
  • Offer a more flexible choice in your network by uniting products with the latest open standard protocols.
  • Include advanced IPv4 and IPv6 Layer 3 routing, security and scalability features.
  • Plug-and-Play configuration with Dell EqualLogic iSCSI storage arrays with one-command iSCSI setup that alleviates multiple-step configuration and potential configuration errors.
Check Stock

Yealink IPPhone SIP-T46S 8-Pack Optima HD USB Dongle PoE 16 VoIP accounts

  • The SIP-T46S IP phone is the ultimate communications tool for busy executives and professionals..
  • Built with Yealink Optima HD technology and wideband codec of Opus, this device enables crystal clear communications..
  • The T46S is also built with Gigabit Ethernet technology, for rapid call handling and use with accessories like a Bluetooth USB Dongle and a Wi-Fi USB Dongle..
  • In addition to offering better overall performance than the T46G, this device has a faster interface with a rich, high-resolution TFT color display..
  • The new T4S series offers the same elegant appearance of the T4 line, but with improvements for greater interoperability and collaboration..
Check Stock

Yealink IPPhone SIP-T46S 4-Pack Optima HD USB Dongle PoE 16 VoIP accounts

  • The SIP T46S IP phone is the ultimate communications tool for busy executives and professionals..
  • Built with Yealink Optima HD technology and wideband codec of Opus, this device enables crystal clear communications..
  • The T46S is also built with Gigabit Ethernet technology, for rapid call handling and use with accessories like a Bluetooth USB Dongle and a Wi-Fi USB Dongle..
  • In addition to offering better overall performance than the T46G, this device has a faster interface with a rich, high-resolution TFT color display..
  • The new T4S series offers the same elegant appearance of the T4 line, but with improvements for greater interoperability and collaboration..
Check Stock

HD Fury - 4K Integral 2 - All-in-One -18Gbps Scaler Matrix Splitter with OSD & HDCP Doctor 136617

  • HDfury Integral 2 is a [email protected] 4:4:4 600MHz 18Gbps HDMI 2.0b Level A smart converter for interoperability between legacy equipment, for integrators,....
  • HDfury Integral 2 is capable of converting HDCP, FHDUHD Resolution, Chroma, Color Depth, Color Space, and more in order to individually feed any of....
  • It supports any HDMI, any HDCP, and any HDR up to HDR10+, HLG or Dolby Vision, including LLDV..
  • HDMI Audio is compatible with any sound format in existence today. It provides full EDID management for an optimal handling of today's wide variety of....
  • Instantly get and feel the HDMI supervisor power through OSD, Windows GUI, RS-232, iOS/Android APP (with GoBlue) and more..
Check Stock

CPE220 5.8G Wireless Bridge PTMP WiFi PTP Point to Point Access Outdoor Network CPE 2KM Transmission Distance with 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Adapter

  • GOODTHREE CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the IEEE802.11a and IEEE802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional..
  • PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable..
  • Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote ne....
Check Stock

1.25G SFP 1000Base-SX, 850nm MMF, 500M, for Cisco GLC-SX-MM/MMD,SFP-GE-S Transceiver Module LC (SFP-SX-MM)

  • Data Rate: 1G；Interface: Dual LC； Cable Type: OM3 MMF；Reach:550M.
  • Each item is individually tested by a skilled technician to ensure premium quality, reliability and interoperability..
  • All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch..
  • "30-day free return, 3-year warranty, and lifetime technical support, FREE metal box included for each module. ".
Check Stock

5.8G Wireless Bridge PTMP WiFi PTP Point to Point Long Range Outdoor Wireless Access Point Extender Network CPE 2KM Transmission Distance with 12DBi Antenna 2 LAN 100MBps 24V PoE Power Supply 2 Pack

  • Bluedery CPE220 network bridge is a 5.8G Long Range Wi-Fi Extender Outdoor Wi-Fi Ethernet bridge with a digital display. It complies with the 802.11a and 802.11n, standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional..
  • PTMP Pre-programmed: The installation of this Wi-Fi outdoor extender aka long range outdoor wireless access point extender is very simple. Simply connect the both bridges to Poe adapters through the Ethernet cables, system will power on, and wait for 1 minute for the both equipment to pair and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired successfully..
  • Using 5.8G / 100Mbps wireless transmission rate between wireless Ethernet bridge can support 1.2 miles transmission distance (Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network Wi-Fi access..
  • Long Range Wi-Fi Extender Point to Point Mode:....
Check Stock

5.8GHz Outdoor Wireless Bridge Point to Point Access PTP/PTMP Plug & Play CPE Network 100Mbps 1.8ML Long Range Outdoor WiFi Extender with 14DBI High Gain Antenna POE Power Adapter

  • [Point to Point Wireless Bridge]: CPE550 is a 5.8G long range WiFi extender which comply with the IEEE802.11a and IEEE802.11n standards to ensure interoperability. The 5.8G outdoor network bridge is capable of sharing internet to remote location up to 3KM (Barrier Free) and its point to point paring function save you much time and effort from complex wire setup process. It is a simple, easy and professional way for long range wireless coverage, data transmit, wireless monitoring..
  • [Easy Installation]: Pre-configured WiFi extender with ethernet port with build in 14dBi panel antenna, the transmit/receive (point to point) wireless distance more than 3KM meters. Suitable for long range video transmission point to point WiFi cover, it supports Wireless AP, Wireless Repeater, Bridge mode, default Pre-program WDS mode, no need setting, it can work two unit at the same time, no need long cable for connect to camera with your PC.
  • [Long Range Transmission Distance]: Up to 3km, actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to ....
Check Stock

Cisco Catalyst 9115AXI-B Wireless Access Point, Wi-Fi 6, 4x4 MU-MIMO, Controller Managed, PoE, Internal Antenna, (C9115AXI-B)

  • POWERFUL Wi-Fi 6 PERFORMANCE: 4x4 Dual Radio, MU-MIMO Wi-Fi 6, up to 5.38 Gbps data rate, uplink/downlink OFDMA for latency reduction, MU-MIMO for maximizing throughput, BBS coloring for increased density, TWT for device energy efficiency.
  • INTEGRATED BLE: Bluetooth Low Energy (BLE) 5.0 radio enables location-based use cases such as wayfinding and asset tracking.
  • ECOSYSTEM: End-point interoperability and optimized performance on Apple and Samsung devices.
  • EMBEDDED WIRELESS CONTROLLER: Controller functions embedded in the Access Point for easy deployment, network monitoring and troubleshooting. Support with WebGUI and mobile app (C9115AXI(E)-EWC models only).
  • PEACE OF MIND: 90-day software and limited lifetime hardware warranty.
Check Stock