Reviews Intermediate Transom

Boat Tie Down Straps to Trailer (Pack of 2) - 2,400lbs Break - 1" x 2.5’ Heavy Duty Ratchet Boat Straps - UV Treated Boat Transom Tie Down Straps - Jet Ski Tie Down Straps - Made in New Zealand

Quality Boat Trailer Straps & PWC Trailer Tie Down - Aerofast started manufacturing transom tie down straps over 40 Years ago in New Zealand. These transom straps were designed specifically as boat trailer straps and tie downs. These transom straps for boat are a single-piece boat ties with the webbing permanently fed through the ratchet, allowing for quick and easy setup..
Superior Break Strength - 2,400lbs per boat tie down strap or 4,800lbs as a pair. The webbing used to make our tie down straps for boats features polypropylene yarn which does not stretch or lose its strength when wet. All of our tie downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength..
Easy to use - Designed to be tough, durable and easy to use. Simply attach the hooks of your transon strap to designated tie down points on the watercraft and trailer. Pull any excess webbing through the ratchet. Position the ratchet away from your watercraft or trailer by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension a....

Watersnake asp T24 electric trolling motor is the ultimate in lightweight portability weighing only 4.85 lbs (2.2kg). It's the ideal trolling motor to use on kayaks, canoes, small dinghies, and inflatable boats..
Watersnake's simple, universal design keeps the weight down while delivering quality and performance on just about every kayak and canoe. Salt water motor with anti-corrosive paint and stainless steel external & internal parts allow you to take this motor into fresh, brackish and salt water without worry.
The adjustable transom mount fitting makes for easy attachment and has an anti-impact clip system. This easy to steer transom motor uses a hand tiller with an extendable handle, high and low-speed control, forward and reverse switch, and a two-blade mini weedless propeller..
So many features! Adjustable transom mount fitting. Anti-impact clip system. High and low-speed control. Forward and reverse switch. Extendable hand tiller steering..
Measurements: Thrust: 24 lb. Volts: 12V. Amps: 9-20. Shaft: 24" (61cm). Prop: 2 Blade, weedless design..

Quality Boat Trailer Straps & PWC Trailer Tie Down - Aerofast started manufacturing stainless steel transom tie down straps over 40 Years ago in New Zealand. These transom straps were designed specifically as boat trailer straps and tie downs. These transom straps for boat are a single-piece boat ties with the webbing permanently fed through the ratchet, allowing for quick and easy setup..
Superior Break Strength - 2,400lbs per boat tie down strap or 4,800lbs as a pair. The webbing used to make our tie down straps for boats features polypropylene yarn which does not stretch or lose its strength when wet. All of our tie downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength, giving you peace of mind that your Boat, Jetski or Watercraft is safely secured to your trailer..
Stainless Steel Quality & Superior Break Strength 2,400lbs per boat tie down strap - 304 Grade Stainless Steel Ratchet, provides added durability around salt water environments. The webbing used to make our tie down straps for boats features polypropylene yarn which does not stretch or lose its strength....

...boards with single ram hydraulic tilt systems (See Fitment Guide). The intended use is to support and brace the outboard motor when trailering to prevent any unwanted motor travel up and down when trailering, This unwanted movement can put damaging pressure to the tilt and trim unit's hydraulic system and boat transom without using wedge/block support..
✅EASY TO USE: No drilling or special installation required, no need to bend over or get on your knees. Eliminate metal to skeg scrapping compared to metal transom savers. Simply tilt engine up, insert high pressure wedge into Tilt Ram piston, then tilt down and you are on your way. No metal, no worries of rust or corrosion and is safe to use in both salt and freshwater applications. No need for straps, rope, bungies, skeg support, or brackets. All you need is the high pressure wedge..
✅UPGRADED DESIGN/HIGH PRESSURE SYSTEM: High Density EPDM rubber formula. Trial tested and constructed better by Mangrove Products. Compression testing over 1000 lbs of pressure, extended wedge length to aid in higher skeg ride height, withstand extreme hot/cold temps under compression, 10 inner notches for secure connection to ....

Enables one Person to easily move a small aluminum boat or canoe.
Rubber-coated 8-inch wide transom bar with a 9.25-inch outside support bar for securing.
Adjustable to fit transoms up to 2.75 inches thick.
Clockwide adjustment knob pulls the transom bar against the support bar for better fit.
Heavy-duty steel construction with a smooth-rolling double-wheel dolly.

Overall Length: 10' 5" / 320 cm *** Inside Length:6' 8" / 210 cm *** Overall Width:4' 9" /150 cm *** Inside Width:2' 2" / 67 cm.
Max. Passenger Capacity: 4 or 880 lb / 400 kg *** Max. Load Capacity:990 lb / 450 kg *** Max. Motor Power: 15 HP / 11 kW *** Max. Motor Weight: 110 lb....
Transom Width: 2' 2" / 67 cm *** Transom Height: 9.5" / 24 cm.

Classic twist-tiller operation equipped with the 3-blade Machete propeller.
Digital Power Management technology extends battery life up to 5 times for longer running between charges.
Tough aluminum 7-position mount gives you greater flexibility and adaptability.
Lower unit constructed of solid steel and aluminum with a powder coat finish to withstand the toughest conditions.
Reversible motor head for bow or transom mount operation.