Reviews Intelligent Calibrator

Fluke 717-1500G Pressure Calibrator 0 to 1500 PSI

  • Pressure calibrator to calibrate pressure-to-current (P/I) transmitters in industrial processes.
  • Measures pressure to 1,500 psi displayed in units of psi, inH2O, cmH2O, bar, mbar, kPa, inHg, mmHg and kg/cm2.
  • Measures mA with 0.015% accuracy and 0.001 mA resolution.
  • Compatible with non-corrosive gases and liquids.
Check Stock

Steve Meade Designs SMD DD-1+ and CC-1 Combo Pack

  • The distortion detection circuitry is 100% analog, digital microprocessing system used for display and calculation of overlap.
  • Distortion Detection trigger level > 1.0% Harmonic Distortion.
  • 3 stage autoranging for wide range of input signal from 1Vrms – 200Vrms. (40,000 Watts at 1 ohm).
  • The Crossover Calibrator’s circuitry is digital microprocessor controlled.
  • Crossover -3dB point accuracy +/- 0.25dB.
Check Stock

Hypertech 42500 Max Energy Power Programmer

  • Optimized engine tuning for maximum power & performance.
  • Reads and clears Diagnostic Trouble Codes (DTC's).
  • Speedometer Calibrator for non-stock tires and/or gear ratio changes for most applications.
  • Automatic transmission shift point and shift firmness adjustments for most applications.
  • Features vary by vehicle application, common available adjustments are: RPM "rev" limiter, Top speed limiter, Fuel Management Systems (DoD, MDS, AFM), 0-60 Throttle restrictions, Cooling fan on/off temperatures.
  • Includes "Return to Stock" feature to remove tune from vehicle when servicing or selling.
Check Stock

Hypertech 32500 Max Energy Power Programmer

  • Optimized engine tuning for maximum power & performance.
  • Reads and clears Diagnostic Trouble Codes (DTC's).
  • Speedometer Calibrator for non-stock tires and/or gear ratio changes for most applications.
  • Automatic transmission shift point and shift firmness adjustments for most applications.
  • Features vary by vehicle application, common available adjustments are: RPM "rev" limiter, Top speed limiter, Fuel Management Systems (DoD, MDS, AFM), 0-60 Throttle restrictions, Cooling fan on/off temperatures.
  • Includes "Return to Stock" feature to remove tune from vehicle when servicing or selling.
Check Stock

Hypertech 52500 Max Energy Power Programmer

  • Optimized engine tuning for maximum power & performance.
  • Reads and clears Diagnostic Trouble Codes (DTC's).
  • Speedometer Calibrator for non-stock tires and/or gear ratio changes for most applications.
  • Automatic transmission shift point and shift firmness adjustments for most applications.
  • Features vary by vehicle application, common available adjustments are: RPM "rev" limiter, Top speed limiter, Fuel Management Systems (DoD, MDS, AFM), 0-60 Throttle restrictions, Cooling fan on/off temperatures.
  • Includes "Return to Stock" feature to remove tune from vehicle when servicing or selling.
Check Stock

Wagner Meters Orion® 910 Pinless Wood Moisture Meter

  • Orion 910 deep depth pinless moisture meters featuring accuracy, versatility, and quality.
  • Built with a non-damaging pinless sensor, IntelliSense technology, and backed with a 7-year warranty.
  • Virtually unaffected by temperature of the wood or the environment.
  • Every Orion meter comes with an on-demand calibrator to easily calibrate your meter.
  • Easily set the wood species you need to measure. Includes a Relative (comparative) measurement mode for non-solid wood measurement applications on treated wood, drywall and other materials.
Check Stock

Wagner Meters Orion® 930 Pinless Wood Moisture Meter

  • Orion 930 dual depth pinless moisture meters featuring accuracy, versatility, and quality.
  • Built with a non-damaging pinless sensor, IntelliSense technology, and backed with a 7-year warranty.
  • Virtually unaffected by temperature of the wood or the environment.
  • Every Orion meter comes with an on-demand calibrator to easily calibrate your meter.
  • Easily set the wood species you need to measure. Includes a Relative (comparative) measurement mode for non-solid wood measurement applications on treated wood, drywall and other materials.
Check Stock

CDN IRL500 Long Stem Fry Thermometer – 12\

  • Commonly used in industrial, pulp and paper, food and beverage processing, HVAC, and OEM applications.
  • Durable and reliable, with an all welded 303/304 stainless steel housing. Corrosion resistant to most chemicals. Hermetic seal, dustproof and leakproof IP65 & NEMA 4x.
  • 90 degree Back angle, rear threaded connection design.
  • Accuracy +/-1% full span per ASME B40.3 Grade A. The calibration reset is located on the side of the case benefiting the calibrator, and requiring an Allen wrench to discourage inadvertent tampering.
  • Manufactured in USA, with an 8 year warranty.
Check Stock

Fluke Calibration 3320 Spare Stir Bar for 6102/7102/7103 Micro-Bath Thermometer Calibrators, 7/16\ Diameter x 2.00 Magnetic Stir

  • Magnetic stir bar for Fluke Calibration 6102, 7102, or 7103 micro-bath thermometer calibrator.
  • Provides improved temperature accuracy, uniformity, and stability.
Check Stock