Reviews Insert Tool

Stainless Trampoline Spring Pull Tool Unbreakable

【Super-Strong and Practical Spring Pull Tool】 Unlike other cheap plastic trampoline spring pullers, our spring pulling tool is made completely of Stainless Steel and is in one piece, which is sturdy and durable ensure that it won't break during use, won’t hurt your hand..
【Simple To Use and Operate】Insert a spring (hook side down) into one of the trampoline mat's v-rings or spring loops, pull back with the spring tool and insert the other hook of the spring into the trampoline frame. Repeat the above actions until finished..
【Worry Free After-Sales Service】We stand behind all our products and offer full customer support! If you are not satisfied with our spring hook tool or service for any reason, please feel free to tell us and give us a chance to solve the problem. Your 100% satisfaction is our NO.1 priority..

Buzzufy LLC is AUTHORIZED Distributor of BERGEON SA, Switzerland.
Universal tool for winding wristwatches made of anodized aluminum with elastomer insert..
Ideal tool for winding mechanical wristwatches after repair. The soft elastomer insert adapts to different crown shapes and provides very good grip to the crown..

Insert: Grooving Insert MGMN200,External Threading Inserts 11ER A60 ,Turning Insert WCMT050304(WCMT2.521),CCMT060204(CCMT21.51),DCMT070204(DCMT21.51).
Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Designed for Steel, cast iron and non-ferrous materials.
Used for turning and finishing on a wide range of materials.
7 pieces Carbide inserts for replace our 1/2” or 3/8” Lathe turning tool holder set , or other brand same size holder, you can search Asin: B07PLYG1Y4 or B07MDC5LMX and buy tool holders.

Insert model for this holder: Carbide insert TiN Coated MGMN-2 Double End Cut-off.
For the Cutting Parameters, please refer to the product image..
The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set..
Please note that this tool holder comes with NO insert installed. Only a holder..

Black oxided smooth finish on each turning tool holder style and shank size..
Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

Black oxided smooth finish on each turning tool holder style and shank size..
Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
Details, recommended cutting speeds and specifications are in the description.

【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
【Checking】Check that the thread and pitch of the tap and the bolt match..
【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..

...ds to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
Stepped tap ensures correct alignment of cutter in existing spark plug hole.
Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch (24.4cm x 12.1cm x 3.8cm) metal carrying case with a plastic molded insert tray for easy transportation, safe storage, and quick organization.
PACKAGE CONTENTS: Package includes drill taps (14mm), tap holder, insert installer, wedge and handle, inserts, Allen wrench hex key, and storage case for your convenience.