Reviews Inner Tierod Tool

XIE Valve Stem Puller/Installer Extractor Tool for Dirt Bike ATV and UTV Tubes Tire Valve Stem Fishing Tool Puller with Valve Core Tightener and Remover Blue

  • When replacing tires and motorcycle inner tubes, there is no need for rubber bands or fingers to be pinched. This tire valve rod fishing tool can....
  • There is a low-profile threaded screw in the inner tube stem, which can easily slide through any rim hole. Installing or removing the valve core does....
  • This tire valve puller uses heavy-duty steel wire, which can extend the service life and times, and can withstand greater pulling force without....
  • Also ideal for installing tires or repairing inner tubes on any vehicle using inner tubes such as ATVs, Ride On Lawn Mowers, Golf Carts, Quads,....
  • We have been cultivating in tool application for many years, just want to provide you with better and cheaper tools to make you happy, rest assured,....
Check Stock

Shark Under Appliance Wand with Adjustable Length of 36 Inches for Use Rocket HV300 and HV320 Series Vacuums (HVUAW300)

  • The vacuum extension wand fits many vacuum only accepting 1 1/4 inch (1.25") (32mm) inner diameter vacuum attachments. Not Fit For 1 1/2, 1 7/8, 2 1/2 inner diameter, please measure your diameter of your vacuum hose or wand brfore purchase for a perfect fit..
  • The outside diameter of the small end is 1.22"(31mm), so the small end of our vacuum extension wand can also be attached to any vacuum accessories with 1 1/4 inch (1.25") (32mm) inner diameter such as our brush, flexible flat suction nozzle, upholstery tool, crevice nozzle..
  • The inner diameter of the large end is 1 1/4 inch (1.25") (32mm), the outer diameter is about 1.34" (34mm). So the outside diameter of the vacuum attachments you want to attached with the large end should be 1.22" (31mm) or 1.21 (30.7mm), inner diameter should be 1.37"(35mm)..
  • The length of the wand is 14.6". The Huiaway extension wands are easy to install, slide in and out of each other decently. The poles are held together by friction. And getting pieces together can make one long wand..
  • Great tool to help cleaning high and low places. The extension wand attached to your vacuum can help you reach high up to get cobwebs off the ceiling and keep you from bending to reach under radiators or dressers..
Check Stock

2pcs Calipers Machinist Solid Outside Inside 6 Inch Joint Calipers Set Firm Joint Calipers Measuring Tool for OD & ID Measuring

  • Product Features: The caliper is a tool for measuring the length, which is divided into a tableless caliper and a table caliper. The method of use is a steel ruler size method and a caliper measurement method.
  • Outer Caliper & Inner Caliper: The outer caliper is used to measure the outer diameter of the cylinder or the length of the object. The inner caliper is used to measure the inner diameter or groove width of the cylindrical hole.
  • Durable to Use: Made of high quality stainless steel, solid ,anti-rust and durable.
  • Cost-Effective & Time-Saving: The measuring tool is durable and practical, and is easy and fast to learn to use.
  • Note: Please allow slight error due to manual measurement. Thanks for your understanding.
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

2 Pieces Tire Repair Tool Tire Compaction Roller Tire Inner Liner Scraper Practical Car Tire Repair Tool for Car Truck Motorcycle Bike

  • ...terial: this tire repair tool is made of quality metal and plastic material, sturdy and durable, corrosion-resistant and not easy to rust, seamless and sturdy, will not deform or destroy easily, and can last for a long time.
  • You will receive: the package contains 1 piece of tire compaction roller and 1 piece of tire inner liner scraper, the tire compaction roller measures approx. 11.5 x 2.8 cm/ 4.53 x 1.10 inches and the tire inner liner scraper measures approx. 15 x 5 cm/ 5.91 x 1.97 inches, practical combination can help you get the job done.
  • Practical and helpful design: the tire compaction roller is bearing inside, which can make this tool using easier and more labor-saving, deep-cut and clearly defined gear-like teeth provides more penetrating pressure to remove trapped air, and ensures good adhesion and seal between patch and tyre.
  • Ideal repair tool: the tire repair tool can be applied to remove air from underneath tire patch repairs and to ensure proper adhesion, easy to operate and practical to use, making your life easier.
  • Wide application: these useful car tire repair tool are suitable for auto car, trucks, motorcycles, bike, bus, bicycle, motorbike and so on, which can be a nice gift to your family members and friends to show your care and lov....
Check Stock

MIKKUPPA 2pcs 7 Point Spline Lug Nuts Socket Key - for 20mm Inner Diameter - Compatible with 21mm 13/16 and 22mm 7/8 Replacement Hex Socket

  • FITMENT - 2pcs 7 Point Spline Lug Nut Socket Key Tool Compatible with M14x1.5, M14x2.0, and 9/16-18 threads 7 spline lug nuts..
  • SPECIFICATION - 20mm Inner Diameter - Compatible with 21mm (13/16) and 22mm (7/8) Replacement Hex Socket..
  • MATERIAL - Electrophoretic paint provides exceptional appearance and corrosion resistance, cold forged and heat treated steel(anti-rusting and....
  • NOTES - Please double check your lug nut dimensions before purchasing, this only works for 7 point spline lug nuts with 20mm Inner Diameter..
  • MORE THAN NUT SOCKET TOOL - We go above and beyond to provide the highest quality wheel lug nut socket tool and top notch customer service. Contact us....
Check Stock

3PCS DIY Twisted Copper Wire Tool Winding Copper Wire for Jewelry Making, Artifact Handmade Antique Jewelry Accessories Mini Pin Vise Jewelry Making Tool (Tools&Copper)

  • ★ Reliable Workmanship: Top quality, silver appearance, fine texture. The exterior of this tool is made of high-quality alloy, compact and firm, not easy to deform..
  • ★ Double Ended Design: The twisting copper wire tool adopts a double-ended design, and the inner cores are made of copper. Each core has two ends, a total of four ends, the replacement & accessories of the core can clamp the copper wire or small tools within the range of 0.3-3.2mm..
  • ★ Size Information: The size of the copper wire winding tool is approximately 10.5 cm/4.1 inches long. The size of the inner core is about 3.5 cm/1.37 inches long. This tool is small in size and easy to carry and store..
  • ★ Value Packaging: In addition to the two jewelry wire making tools, there is also a roll of 12 meters long 0.3mm thick copper wire in the wire wrapping kit. With these jewelry making tools, you can make many beautiful handicrafts, such as beautiful antique hairpins, bracelets, necklaces and so on..
  • ★ DIY Your Own Jewlery：Use this wire twisting tool to design and handcraft a unique gift as professional for your friends. Bring you a lot of diy jewelry fun and sense of accomplishment..
Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • ...ke Booster Push Rod Adjustment Tool Turned Out to Be So Easy - Yoolon designed a brake booster adjustment tool that works for everyone, even if you don't have the expertise also can use power brake booster pushrod pin adjustment tool quickly and easily. The brake adjustment tool's designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
  • Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
  • High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, and the mid....
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (26.7cm x 21cm x 5.7cm) plastic blow-molded carrying case with handle for easy transport, safe storage, and quick organization.
  • CONTENTS: Complete with puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
  • includes (1) 3-eye round clutch plate sander arbor, (3) 1....
Check Stock