Reviews Inlet Valve

mistcooling 250 PSI Misting Pump

  • ...d valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is tur....
Check Stock

Ice Maker Water Valve 241803701 242252603 240519601 for New Frigidaire Refrigerator

  • Actual #’s on valve: 242252603 RIV-11AE 8F-140319 Angled valve bracket is easily bendable with pliers.
  • Refrigerator Water Inlet Valve This valve will fit most brands such as Frigidaire, White Westinghouse, Tappan, Gibson, Kelvinator, Sears, & Kenmore.
  • It is a single solenoid valve with a 1/4″ inlet & outlet which is standard. This valve has the new “John Guest” style fitting which allows you to just push the waterline directly into the valve from the ice maker. It’s that easy and no leaks! The other end will have the standard 1/4″ compression fitting that your supply line will hook to..
  • This valve will work with most all refrigerators that have the freezer on top or bottom. It will NOT work with a refrigerator that has a water filter built into the refrigerator from the factory..
  • What’s Included? (1) Valve, (1) 1/4″ Waterline, (2) Mounting Screws & More!.
Check Stock

bobotron Side Brush HEPA Filter Main Brush for Mijia STYJ02YM for Conga 3490 for Viomi V2 V-RVCLM21B Vacuum Spare Part

  • 2 White Inlet Valve Round Door Covers for Central Vac. .
  • A Round Door is featured on the White Standard Inlet Valve..
  • Vacuum cleaners The Most Common Low Voltage Connections for Starting the Vacuum Power Unit.
  • Usage of inlet valves The inlet opening is 1.5 inches wide and has two electrical contacts..
Check Stock

Galaxy's Edge Star Wars Legacy Lightsaber (26' Lightsaber Blade)

  • Pack of 2 premium inflatable swords. Luke / Yoda green single blade design..
  • New design: Longer, stronger, and better fight action! Great for high-energy low-impact battle..
  • Customize stiffness and impact level by adjusting air pressure. These sabers can be inflated extra-firm to ridged with an air pump, or compressor. They will swell in diameter with over inflation, so try to keep the air pressure at a minimum to achieve the desired firmness, but maintain the original shape. *For the perfect air pump, no batteries required, and excellent sanitary choice for inflating these, go with Amazon’s ASIN: B091NDVVP3.
  • Easy inflation: One-way check valve incorporated in Inlet to help prevent air from escaping while inflating. For best results: Press back of inlet to help establish the seal prior to initial inflation. Inflate, and hold finger over inlet for a few seconds. This gives the check valve time to rest and seal, and helps maintain air between breaths. Close valve, wait a minute or so for the plastic to relax, and inflate further to desired firmness..
  • To deflate: pinch base of valve. This opens valve and allows air to escape..
Check Stock

Cen-Tec Systems 93070 Central Vacuum Kit with Switch Control Hose, 35 Ft, Silver

  • The 93048 is compatible with air turbine nozzles and all major brands of central vacuums including Beam, Electrolux, Eureka, Vacuflo, Vacumaid, MD, Cyclovac, Canavac, Hayden, Star Power, and Imperium. The hose is compatible with air turbine nozzles and 1.25 inches accessories of all types.
  • The 93070 permits remote activation of the central vacuum through the low volt contacts exposed in the inlet valve opening. It does not connect to 120 V power permitting the use of an electric power.
  • The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle.
  • The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush.
  • To confirm this package will work with your inlet valves you can confirm there are two small contact points located in your inlet valve on either the top half or bottom half of the inlet valve opening.
Check Stock

WR57X10032 WR57X33326 Refrigerator Water Inlet Valve WR57X10032 Dual Solenoid Valve Compatible with Ge Refrigerator Replace WR57X33326 WR57X10040 WR57X10064

  • ★★WR57X10032 WATER INLET VALUE:WR57X10032 double solenoid water valve, one solenoid valve allows water to flow into the ice maker, and the other....
  • ★★DIRECT REPLACEMENT:WR57X10032 water inlet valve directly replaces refrigerator water valve WR57X33326, WR57X10032, AP6995571, WR57X10040,....
  • ★★COMPATIBLE MODELS:WR57X10032 compatible with most brands such as G-E:....
  • ★★INSTALL AND REPAIR:WR57X10032 water inlet valve can solve the following problems: the solenoid is faulty.
Check Stock

AGM73269501 Water Inlet Valve Filter Screens (2 Pieces) for LG Washers by PartsBroz - Replaces Part Numbers AP5202486, 1810261, AH3618281, EA3618281 & PS3618281

  • ✅ PART NUMBER AGM73269501: It’s a high-quality exact equivalent for part numbers AGM73269501, AP5202486, 1810261, AH3618281, EA3618281, and PS3618281. The two-pack includes one hot-water line and cold-water line inlet valve filter screen..
  • ✅ FOR LG & KENMORE WASHERS: These inlet valve filters fit several washing machine models made by LG, Kenmore, and Sears. Refer to your owner’s manual or reach out to us to confirm compatibility with your specific model..
  • ✅ FIXES COMMON PROBLEMS: If your washing machine won’t fill up with water or takes a long time to fill up, you need to check the water inlet valve filter screens. Replacing the screens will restore water flow to your machine..
  • ✅ 5-MINUTE FIX: Fix your washing machine yourself in just five minutes. You just need these filter screens, a pair of pliers, and a small towel..
  • ✅ HIGH-QUALITY DESIGN: These inlet valve filter screens meet or exceed manufacturer specifications for performance and fit. They’re made from durable plastic and are color coded for easier use..
Check Stock

RV Water Inlet, RV City Water Inlet with Check Valve with 3/4 NH Female to 1/2 NPT Male Lead-free Brass City Water Inlet Flange for RV, RV Water Inlet Replacement

  • 【City Water Inlet for RV】: The RV water inlet connection check valve is with 3/4’’ NH(GHT) female into 1/2’’ NPT male thread, an extra flexible rubber dust plug for replacement..
  • 【Material】: The RV city water inlet valve is lead free brass, keeping your water safe to drink. The white flange is made of metal. Durable metal construction allows the check valve backflow preventer to withstand high pressure, temperature, resistant to corrosion and frequent daily use..
  • 【Metal Fresh Water Fill Inlet Flange】: Easy to install this RV water check valve inside your RV's fresh water system to prevent backflow and keep nasty contaminants out of your RV's fresh water plumbing, the rubber cap protects connection point from dust when not in use..
  • 【Application】: RV water inlet replacement use for many trailer marine RV camper connection to city water hoses, keeps contaminants out of your fresh water system, Easy-grip knob lets you easily attach and detach your hose..
  • 【Quality Warranty】: We did 100% inspection before RV water check valves leave our factory, if you have any problem with these products, please feel free to contact us, we will 100% refund to you or replace a new set for you..
Check Stock

ANTOBLE Standard Central Vacuum Wall Inlet Valve Cover Plate for Beam Central Vac - White Round Door 2 Pack

  • Fit Perfectly: The central vacuum wall plate features a Round door. Worked perfectly for Beam central vac units..
  • Easy to install: The central vacuum inlet cover is made nicely with the valve opening easily to put the vacuum cleaner into the wall..
  • Most Common Inlet Valves Used: For new and existing low voltage construction applications..
  • Size Details: Inlet opening measures 1.5" and has 2 electrical contacts inside the port (as seen in picture)..
  • Includes: 2 central vacuum inlet valve round door cover plates replacements, 4 screws..
Check Stock