Reviews Injector A Fuel

C80 Non-Dismantle Gasoline Auto Fuel Injector Cleaner Kit and Tester for Petrol EFI Throttle Car 600ML Tank 140PSI Throttle Cleaner

  • 【Function】The non-dismantle fuel injection are mainly used to clean the fuel injector and intake system, and the fuel system can be taken out from the cleaning system..
  • 【Multi-function】Our cleaning tool not only has high and low pressure cleaning function, but also has the entire fuel system including throttle, fuel nozzle and combustion chamber..
  • 【Application】The injector cleaning kit includes many different types of adapters, covering almost all cars and light trucks in the European Union, Asia, and the United States..
  • 【Universal Feature】: Non-dismantle fuel injector has anti-friction connectors for fast- connection and anti-friction oil tubes for all cleaning fluid..
  • 【Note】C80 injector cleaner kit dosen't include cleaning fluid, and only for gasoline injectors, not for diesel injectors. Please wear protective glasses before operation. Observe whether the joint is leaking. If yes, please clear the fault before starting work..
Check Stock

X AUTOHAUX 6 Set Fuel Injection Valve Seals Repair O Ring Kit for Audi A4 A6 A8 Q7 R8 2.8L 3.2L V6 V8 for VW Touareg Replace 06E998907G

  • [Fitment] for Audi A4 A5 A6 A8 Q7, for Volkswagen Touareg 2006-2009, for Volkswagen Touareg 2011-2017. (Not for all models, please refer to the corresponding engine year and model by DESCRIPTION in page)..
  • [Replace Number] 06E998907, 06E998907E, 06E998907G, 06E906036P..
  • [Function] Replace the Fuel Injector Seal to avoid the following conditions: 1. Hard Starting when engine is hot. 2. Increased Fuel Consumption. 3. Rough Idle. 4. Fuel odors inside and around the car. 5. Poor Emissions. 6. Oil thinning, which can lead to catastrophic engine failure. 7. Hydro-lock, which can lead to catastrophic engine failure..
  • [Installation] Need professional installation, manual not included. You can search for related video resources online about replace an injector seal to guide the installation..
  • [Package Includes] This fuel injector repair kits include 6 x injector upper o rings, 6 x injector upper seals, 6 x upper retaining pintle caps, 6 x lower retaining pintle caps, 6 x injector caps..
Check Stock

C80 Non-Dismantle Gasoline Fuel Injector 140PSI Throttle Cleaner Auto Fuel Injector Cleaner Kit and Tester for Petrol EFI Throttle Car 600ML Tank

  • ★【Function】The non-dismantle fuel injection are mainly used to clean the fuel injector and intake system, and the fuel system can be taken out from the cleaning system..
  • ★【Multi-function】Our cleaning tool not only has high and low pressure cleaning function, but also has the entire fuel system including throttle, fuel nozzle and combustion chamber..
  • ★【Application】The injector cleaning kit includes many different types of adapters, covering almost all cars and light trucks in the European Union, Asia, and the United States..
  • ★【Universal Feature】Non-dismantle fuel injector has anti-friction connectors for fast- connection and anti-friction oil tubes for all cleaning..
  • ★【Note】C80 injector cleaner kit dosen't include cleaning fluid, and only for gasoline injectors, not for diesel injectors. Please wear protective glasses before operation. Observe whether the joint is leaking. If yes, please clear the fault before starting work..
Check Stock

AUTOOL C100 Universal Automotive Non-Dismantle Fuel System Cleaner Auto gasonline Injector Clean tool For Petrol Cars

  • Fuel System Cleaning Autool C100 can clean fuel injector, Air intake system and Three-Way Catalytic Converter, it is a Free disassembly cleaning tools ..
  • Fit for: almost all USA EU Asia cars and light truck..
  • it is only for gasoline injector,not for diesel injector!.
  • Check fuel injection model: throttle or EFI.
Check Stock

JDMON Compatible with FICM Fuel Injector Engine Complete Wire Harness Ford F250 F350 F450 F550 Excursion Powerstroke 6.0L Diesel 2004-2007 Replaces Part 5C3Z9D930A 5C3Z-9D930-A

  • [HIGH-DUALITY MATERIALS] OEM-compliant fuel injector harness are constructed with high-quality materials that will not become brittle when exposed to extreme engine temperature.If your truck has a jetting fault code, idling or not traveling smoothly, please check and replace the harness in time to allow 6.0 Powerstroke to run normally..
  • [REPLACES PART] The fuel injector control module harnesses are a direct OEM replacement, replace Ford part number 5C3Z9D930A and 5C3Z-9D930-A ,making installation quick and easy..
  • [ENSURE THE RIGHT SINGNAL] The fuel injector harness' electric terminals are constructed with an aluminum material that is resistant to oxidation ensuring proper signal is maintained to the injector..
  • [WELL CONNECTED] The fuel injector harnesses use a high-temp Viton o-rings which enable prolonged sealing of electrical connection under extreme heat conditions..
  • [FITMRNT] Compatible with 2003, 2004, 2005, 2006, 2007 Ford F250, F350, F450, F550 and Excursion with the 6.0 Powerstroke Diesel engine. Including model years 03, 04, 05, 06, 07..
Check Stock

Gumout 510019 Fuel Injector Cleaner, 6 oz. (Pack of 6)

  • Two 5.25 fl oz bottles of STP Super Concentrated Fuel Injector Cleaner.
  • Fuel additive contains concentrated detergents for effective car care.
  • Dissolves and removes carbon, gum and varnish deposits that can be harmful to fuel injectors.
  • Jet fuel works as a carrier to deliver the active ingredients effectively.
  • STP fuel injector cleaner helps to prevent hard stops, lost acceleration and rough idling and helps save gas.
  • Use this additive with every oil change or every 4,000 miles.
Check Stock

QPKING Automotive Fuel Injection Systems Cleaning Tools, CFS Series Fuel System Cleaning Assistant Fuel Injector Cleaner 600ML 140PSI

  • Kindly Notice: To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.
  • NOTE:Clean liquid not include,work on gasoline injector only, not for diesel injector.
  • The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle..
  • The injector clean kits include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light trucks (petrol and diesel). Non-Dismantle injector Throttle and fuel system..
  • Throttle model: The way of connection is the same, just adjust the pressure of the air source 1-5PSI. The way to identify the inlet and return hose: 1.Generally speaking, inlet hose is bigger, return hose is samaller.
  • 2.There is always a filter connected in the inlet hose side, and a buffer in the return side.
  • 3.There is arrow on the hose to show the fuel flow direction.
Check Stock

kipa Diesel Fuel Injector Cup Sleeve Installation Removal Tool for 6.6L LB7 Chevy Duramax Engines 2001-2004.5

  • Top Quality Well-Manufactured Diesel Fuel Injector Cup Sleeve installation Removal Tool is an engine tool kit made from sturdy, tough prime fibrous Alloy materials that Trucks & Cars enhanced durability and superior reliability. Durable.
  • A must have for any shop working on LB7 Duramax Engines, This Fuel Injector Sleeve Tool helps with the removal and installation of the injector cups without damaging the cup in the process..
  • Fitment: Replace for 2001-2004.5 6.6L LB7 Chevy Engines. All hardware has been coated for rust resistance as well as a rockwell hardness of over 62 to ensure a long life.
  • Replace for OE Part Number J-45910, 7222, ST-193, 2386. KIPA Tool utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. The tool use bridges that are quickly fastened to the injector mounting holes..
  • Our design is engineered towards repeated shop use, and efficiently removing and installing the injector cups . Removing and installing the injector cups should be a surgical operation, not something requiring beating cups in with hammers and leaving brass filings from removing.KIPA designed our tools with tight clearances, a....
Check Stock

Autool C-100 Automotive Fuel Cleaning Tools CFS Series Fuel System On-vehicle Cleaning Assistant Fuel Injector Cleaner 600ML 140PSI

  • The injector clean kits include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light trucks. Non-Dismantle injector Throttle and fuel system..
  • The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle..
  • NOTE:Clean liquid not include,work on gasoline injector only, not for diesel injector.
  • NOTE: To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.
  • Throttle model: The way of connection is the same, just adjust the pressure of the air source 1-5PSI. The way to identify the inlet and return hose: 1.Generally speaking, inlet hose is bigger, return hose is samaller.
  • 2.There is always a filter connected in the inlet hose side, and a buffer in the return side.
  • 3.There is arrow on the hose to show the fuel flow direction.
Check Stock