Reviews Infrared Emitting Diode

ICQUANZX LCR TC1 ESR Tester Transistor Inductance Capacitance Resistance ESR Meter

For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, etc..
Can also be used to detect infrared wave forms..
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form..
One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector..
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly..

★【BRAKE LIGHT】APPLY YOUR BRAKE : The LED light shines bright!.
★【FOR EXTRA SAFETY】>>>>> ONE MORE LIGHT >>>【FOR EXTRA SAFETY】.
★【ATTACHES】 to your standard 4-pin electrical wiring harness and have LEDs with over 100,000 hours lifespan.
★【LED LONG LIFE】is an electric light for use in light fixtures that produces light using light-emitting diode (LED). LED lamps have a lifespan....
★【Keep Hitch Reciever CLEAN】An open trailer hitch is exposed to the elements that bring on the rust bug and accumulates debris that can clog the....

Automatic detection of zener diode 0.01-20V..
Infrared receiving instructions. The measurement results are displayed by TFT graphic. A key operation..
Support infrared coding. Self-test with automatic calibration. Infrared waveform display..
Automatic shutdown (timeout setting). Built-in high capacity rechargeable lithium ion battery..
The measurement results are displayed by TFT graphic. Lithium ion battery voltage detection..

LED light: A light-emitting diode (LED) is used to illuminate the watch face. Case Size : 48.1 × 43.7 × 13.7 mm.
Hourly Time Signal, 1/100 second stopwatch, Countdown Timer, Full auto-calendar (pre-programmed until the year 2099.
12/24 Hour Formats, Button operation tone on/off.

【Wild Application】:1.8" Full Color Display,Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, Mega328,BJT, resistor and capacitor and various electric transistor testing..
【Built-in Battery】:Built-in lithium battery, convenient and effective, the indicator light shows green when fully charged. Warm Reminder: The charging input voltage is 4.5V, please do not use it under overpressure, otherwise the tester will be damaged..
【Add IR Decoder】: After the component detection is completed, the infrared remote control at the tester "IR" test hole, press the remote control key, the tester will be display the user code & data code and the corresponding infrared waveform after the successful decoding.
【Auto shut-down Function】: Our advanced electronic transistor tester owns auto shut-down function.Convenient and practical..
【Extra accessories】: use accessories, more convenient and efficient to complete your project(Please refer "Product guides and documents"to get user manual).

Product nameLight emitting diode metal signal indicator lamp.
Product size:14mm/0.55"*15mm/0.59"（D*L),Wire length:20mm/0.78".
Easy to install and use: plug-in design, just insert the LED Metal Signal Indicator Light where we need it, connect the line and you can use it..
Widely used: 12V metal signal indicator can be used in electrical appliances, doorbell, automobile, motorcycle modification, ship, yacht, etc..

For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc..
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight)..
Measurement results represent by TFT graphic display(160x128). Support Chinese and English..
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form..
One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector..

BUY ONE, GET TWO SENSORS: Elitech IR-200 comes with both the infrared sensor and the heated dioded sensor. Quick switch between two sensors, ensures high accuracy and maximum of 10 years sensor life. It triggers all halogenated refrigerants much more precisely than the traditional corona sensor and single heat-diode sensor..
SELECTED SENSITIVITY: 3 Selectable Sensitivity Levels -High/Medium/Low.
1000 levels of heating diode automatic adjustment. With a maximum sensitivity up to 0.14oz/yr, 4g/yr..
TFT SCREEN: The world's first TFT screen advanced leak detector animates leakage, sensitivity, battery levels and sensor faulty indicators and presents more clear and easy readings..
RESET SENS: Press the “Reset SENS” button in the clean environment to increase the sensitivity when the sensitivity is not enough.
press the button to reduce sensitivity when the sensitivity is out of scale..
FREE RETURN OR EXCHANGE WITHIN 3 MONTHS: It meets EN14624, SAE-162, SAE-2791 and SAE-2913 standards. 24/7 US Technician Support via Email and Phone..