Reviews Industrial Threading Tools

Cen-Tec Systems 94225 Shop Vacuum 20 Ft Whip Hose and Power Tool Adapter Set for Dust Collection, Black

  • ...acuum hose and then connected to power tools using the provided soft molded TPE tool adaptors. The 1. 0” diameter light weight whip hose allows for free movement of the power tool without kinking and allowing for dust collection from all major brands of power tools equipped for dust recovery during use. By simply threading off the swivel adaptor and threading on the hose end of the whip hose you have a power tool dust recovery solution for working up to 20 feet from the vacuum.
  • The soft 1” TPE adaptor is used for mating the hose with all major brands of power tools and power tool shrouds equipped for dust recovery during the use of the power tool.
  • The 1. 0” interior diameter adaptor press fits on the end of the 1” whip hose end and can fit over male power tool or shrouds with a 1. 0” male connection. The 1. 0” adaptor has four concentric rings to press fit firmly tonto the tool and hold during use. Some tools and shrouds accept this same fitting as a 1. 40” tapered male connection where to soft TPE material holds firm.
  • The second soft 1. 50” TPE adaptor for mating with major power tools and shrouds equi....
Check Stock

RIDGID 44913 600-I Pipe Threading Machine, Hand Held Power Drive Pipe Threading Machine with Carrying Case and Dual V-Jaw Support Arm for Stable Operation

  • Lightweight design makes these hand-held pipe threading tools one of the easiest to handle threaders in the RIDGID line.
  • Durable, die-cast housing and fiberglass-reinforced plastic body make this hand-held threader ideal for harsh working conditions.
  • Built for use with RIDGID 11-R Drop Head Die Heads to easily cut pipes ranging from 1/8 inch to 1-1/4 inches (3 mm to 30 mm) in diameter.
  • Convenient dual V-jaw support safety arm delivers the sturdy, reliable support needed to withstand both the machine’s weight and threading forces.
  • Rugged metal carrying case protects the pipe threading machine while keeping multiple die heads neatly organized for quick and easy transport.
Check Stock

The Hillman Group 180210 Coupling Nut 1/4 - 20 50-Pack

  • Threaded fasteners for joining two male threads, most commonly threaded rod.
  • Used to make up long rod assemblies from shorter lengths of rods.
  • Similar to hex nuts with extreme height measurements giving them length.
  • Use with fasteners of the same threading and finish.
Check Stock

Steel Dragon Tools® 700 Power Drive 41935 with 12R Ratchet Threader 2A Cutter 460 Tristand and 418 Oiler Bucket

  • Steel Dragon Tools 700 Power Drive Pipe Threader 41935..
  • Steel Dragon Tools 12-R Manual Ratchet Pipe Threader with die heads and dies..
  • Includes Steel Dragon Tools 418 Oiler Bucket and 2A Pipe Cutter..
  • Also includes Steel Dragon Tools 460 Tripod Stand Chain Vise..
  • Pipe Threading Capacity: 1/8 in. to 2 in. (3 mm to 50 mm)..
Check Stock

Aloris Tool AXA-1S Oversized Turning and Facing Holder

  • OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
  • Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Electric Pipe Threader Tool Kit 2300W 110V, Portable Handheld Electric Pipe Threader Threading Machine With 6 Dies 1/2-Inch to 2-Inch Pipe Threading Die Heads, Ratchet Pipe Threader Kit

  • Lightweight design makes these hand-held pipe threading tools one of the easiest to handle threaders in the RIDGID line.
  • Durable, die-cast housing and fiberglass-reinforced plastic body make this hand-held threader ideal for harsh working conditions.
  • Built for use with RIDGID 11-R Drop Head Die Heads to easily cut pipes ranging from 1/8 inch to 1-1/4 inches (3 mm to 30 mm) in diameter.
  • Convenient dual V-jaw support safety arm delivers the sturdy, reliable support needed to withstand both the machine’s weight and threading forces.
  • Rugged metal carrying case protects the pipe threading machine while keeping multiple die heads neatly organized for quick and easy transport.
Check Stock

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

  • ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
  • ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock

Little Giant 555110 115 Volt, 360 GPH Stainless Steel Non-Submersible Multi-Purpose Utility Water Transfer Pony Pump with 6-Ft. Cord and Plug, White, 360S

  • PORTABLE UTILITY PUMP: 115 Volt stainless steel pump is ideal for water transfer or removal in and around the home.
  • this pump is a non-submersible pump with a 6-ft. cord.
  • DUAL THREADED INTAKE AND DISCHARGE: 3/4-inch male garden hose threading and 3/8-inch FNPT threading for use with 3/4-inch standard garden hose or 3/8-inch male threaded pipes.
  • REPAIR KIT INCLUDED: includes two extra impellers and replacement gasket.
  • installation instructions included in owner's manual.
  • CORROSION-RESISTANT STAINLESS STEEL PUMP BODY: resists corrosion and is suitable for residential or industrial applications.
  • 2.4 starting Amps, 360 GPH at 1-ft. lift.
Check Stock