Reviews Industrial Oil Pump

VEPURLT Air Hydraulic Pump 10,000PSI, Air Hydraulic Foot Pump 1/2 Gal Reservoir, Air Foot Pedal Hydraulic Pump with Hose for Hydraulic Bead Breaker

...rable and reliable. A spray gun is included to control the input and interruption of the airflow, which is an effective start-stop device..
【Applicable Scenarios】-The air hydraulic pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications. Pump, hold, or release load using simple pedal control - great unit for use with a wide variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI.

Check Stock

12V 60W Vacuum Transfer Pump Extractor Oil Fluid Diesel Electric Siphon with Hose for Car Boat Motorbike

5L oil liquid suction pump extractor,Small size, easy to carry and storage.
Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V.
Pump Diameter: Approx. 4.8cm, Cable Length: Approx. 30cm, Clips Length: Approx. 8cm.
Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
Pls use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump.

Check Stock

JDMSPEED New HEI Red Cap Distributor Replacement For Ford FE V8 Engines 65000 Volt 352 360 390 427 428

THESE DISTRIBUTORS ARE FOR THE "FE" BLOCK ENGINES THAT USE THE 1/4" OIL PUMP DRIVE SHAFT.
THESE WILL NOT WORK FOR INDUSTRIAL "FE" ENGINES THAT USE THE 5/16" OIL PUMP SHAFT.
This is a must for those wishing to upgrade the ignition system to a HEI.
Please see below description for more details.

Check Stock

50:1 Ratio Air Operated Grease Pump,Heavy Duty Pneumatic Grease Pump with 4M Pipe and Oil Water Separator (30-40 Mpa)

...ers measure the height and diameter of the barrel before purchasing, and confirm with the picture whether it is suitable for use..
【Premium Material】Distributes grease with up to 30-40 times the intake pressure, wear-resistant all-metal construction, CNC machined, designed for heavy workloads, adjustable intake, industrial silencer, shut-off gun, professional grease pump, performance ensure..
【Automatic Operation】Fully automatic continuous operation, the oil-water separator has the functions of automatic filtration of air moisture and automatic oil injection, which keeps the plunger away from oxidation, maintains permanent lubrication, provides excellent grease flow, and has a longer life..
【Complete set】0-3# grease, high frequency oil cylinder, oil shortage protection, nitrile rubber sealing element, 4 meters high pressure grease pipe, suitable for factory, workshop, farm, construction or as part of mobile lubrication system..
【Satisfied After-sales】We are committed to all after-sales, so that buyers can better get satisfactory service. If you have any questions, please feel free to contact us! We will reply to you within 24 hours of receiving your email..

Check Stock

Barnes 104982 Model 2SEV1022L Sewage Pump, 1 hp, 240V, 1 Phase, 2

LARGE DISCHARGE CAPACITY: This model is designed with a maximum discharge head of 52-Feet and can pump up to 138 GPM.
DESIGNED TO PUMP RAW SEWAGE: Our 2SEV1022L model is a submersible pump that is specifically designed to handle 2-inch spherical solids and is ideal for typical raw sewage applications.
HANDLES SPHERICAL SOLIDS WITHOUT CLOGGING: Each pump is designed with a cast iron vortex impeller to allow for easy and effortless passage of 2-inch spherical solids without clogging or backing up.
HEAVY DUTY SPLIT CAPACITOR MOTOR: Every pump features a powerful permanent split capacitor motor for reliable, high performance with a longer motor life and a lower amp draw.
INDUSTRIAL GRADE: Great for commercial applications, the robust design or this pump features a corrosion resistant stainless steel shaft and hardware, heavy duty cast iron motor housing, and oil lubricated ball bearings.

Check Stock

Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Single Acting Pullers Foot Pump with Trachea and Oil Pipe for Pumping Water Automobiles Industrial Chemical Petroleum Mining Pulling Post

【ALL-METAL STRUCTURE】This hydraulic foot pump is specially designed for industrial applications with all-metal structure. It has fully reliable components, all components are standard 3/8 inch NPT..
【FOOT PEDAL CONTROL】The hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Full of power, two-stage pressure relief, 1.5 times the speed of ordinary hydraulic pumps..
【OUTPUT PRESSURE】Air Treadle Foot Actuated maximum pressure: 10000 psi hydraulic pump and has a built-in safety overload pump power saver. Maximum input air pressure: 140PSI. Flow rate: 0.74-0.97 m3/MIN. Rated pressure: ≤ 70 Mpa..
【APPLICATION】Widely used in automobile manufacturing inspection and maintenance, engineering technology, aerospace, chemical, petroleum, mining and other industries to provide high-pressure power for hydraulic equipment..
【FAST OILING AND GOOD SEALING PERFORMANCE】Aerospace Grade Materials aluminum fuel tank capacity: 1.6L, hydraulic oil type: AW-32. The hydraulic pump is equipped with a high-pressure tubing. Oil outlet: 3/8 inch NPT, Air inlet: 1/4 inch NPT. The tubing adopts double-protected embedded steel wire and a thickened outer layer, whi....

Check Stock

Multi-Purpose Siphon Transfer Pump Kit, with Dipstick Tube | Fluid Fuel Extractor Suction Tool for Oil, Gasoline, Water, Liquids & Air

PUMPS A VARIETY OF FLUIDS - For use with non-corrosive fluids, automotive, agricultural and industrial fluids such as motor oil, transmission fluid, gear oil, engine coolant, silicone oils, and more (not suitable for gasoline)..
FITS STANDARD DRUMS - Two-tier threaded bung fits standard 2-inch and 1.5-inch metal and plastic drums.
IMPRESSIVE OUTPUT - The 1340 lever-action pump produces 14 oz. per stroke..
NO DRIPPING - The outlet discharge spout has a built-in aluminum die cast non-drip attachment and can be removed to allow attachment of a garden hose..
DURABLE DESIGN - Premium powder-coated steel pump body with an aluminum die cast pump head for durability..

Check Stock

TERA PUMP Heavy Duty Steel Barrel Clear Pump with Telescopic Suction Tube For use on 15 to 55 Gallon Drums Compatible Liquids Diesel Oil, Motor Oils, Heavy & Light Oils

[ TRANSFER RATES ] Transfers up to 10 Gallons per Minute with Manual Dual Directional Rotary-Action - Curved Gooseneck Spout with 0.9-inch Opening - Made of industrial strength cast-iron body with precisely machined iron vanes - Professional Geared Rotary Barrel Pump.
[ RECOMMENDED ] Suitable for Gasoline, kerosene, oil, diesel, hydraulic fluid, lubricating oil, antifreeze (ethylene glycol), ethylene glycol, other non-corrosive liquids - Portable, Light Weight and Heavy Duty Material - Filtered Suction Tube to prevent any unwarted debris.
[ TELESCOPIC TUBE ] Suction Tube length of about 40-inch, Fits 15-Gallon (50 Liters) and up to 55 Gallon (205 Liters) Drum Barrels - Suction end Outer Diameter: 1-inch - Complete with built-in & 2-inch NPS bung adapter for Drum Barrels with 2-inch Openings, Simply slide the bung adapter to the size of the drum.
[ MANAUL POWERED ] No Electricity Required: Utilizes lever-action to transfer liquids by a simple grip and pump - Works great with farm equipment, Industrial Vehicles and in Automotive Shops - Quickly Empty 55 Gallon Drum Barrels.

Check Stock

Comfort Axis Deluxe Plastic Dispensing Pump, Fits Gallon Jugs (Pack of 6)

For easier dispensing of massage lotion, oil, or gel from a 1 gallon bottle with 38/400 thread.
Convenient, durable, sturdy, and highest quality pump.
Ideal for Home, Industrial or Commercial Use.
This dispenser pump has 38 mm screw top. Able to be connected to a jug or bottle for direct use..

Check Stock