Reviews Industrial Equipment Adapter

PSCCO CF Card to 40-Pin IDE Adapter Compact Flash CF to IDE Bootable Converter

  • Supports CF-I and CF-II two types of cards:IBM micro hard disk that also supports CF-II interface..
  • The IDE interface is a 40-pin/2.54mm female connector:this card can be plugged directly into the IDE socket..
  • Standard IDE interface:true-IDE mode,and supports DMA-33 transfer mode.Power supply from 5.0V or 3.3V,Select the appropriate supply voltage according to your CF card..
  • Widely used in notebook computers,personal digital assistants(PDAs), portable instruments,or industrial equipment..
  • Package included:1pcs CF to 40-Pin IDE Adapter.It has the characteristics of low power consumption and no damage..
Check Stock

MokerLink 5 Port Gigabit Industrial DIN-Rail Ethernet Switch, 14Gbps Switching Capacity, IP40 Rated Network Switch (-40 to 185°F), with UL Power Supply

  • This network switch include 4 gigabit ethernet ports and 1 gigabit uplink, all ports support 10/100/1000Mbps rate, switching capacity up to 14Gbps, with better data performance.
  • The shell is made of industrial-grade aluminum alloy, which is more sturdy, surface groove design, better heat dissipation, integrated DIN-rail mount kit, installation and disassembly are very simple.
  • IP40 protection grade, working temperature -40~75°C(-40~185°F), super robustness, anti-lightning, anti-static and anti-overload protection, adapt to various harsh environments.
  • Dual power supply, automatic fault switching, anti-reverse connection does not damage the equipment, higher reliability, equipped with one UL-certified power adapter, can be used without additional purchase.
  • Support auto-negotiation, plug and play, no configuration needed, low-power consumption CPU, no fan quiet operation, green energy saving, suitable for various networks, such as home office, computer room, warehouse, factory, compact control box and other industrial scenarios with Ethernet access.
Check Stock

Cable Matters 2-Pack SMA Male to UHF SO-239 Female Cable 1 ft in Black (SMA to UHF SO-239 Cable, SO239 to SMA/UHF to SMA Coaxial RF Cable)

  • Expand your radio equipment with the Cable Matters SMA to UHF Cable.
  • SMA to UHF adapter cable connects to radio equipment and antennas with SMA and SO-239 connectors.
  • SDR antenna cable enables a USB radio dongle to connect to antennas using UHF coax connectors.
  • Compatible with RTL-SDR dongle and adapters.
  • Radio antenna cable adapter enables flexibility and increases your antenna choices.
  • Ham radio antenna adapter cable connects radio equipment to standard UHF antenna adapter.
  • High quality UHF adapter cable features a 50 Ohm impedance rating for optimal performance and supports a frequency range of 0-6GHz.
  • Ideal for use as a radio antenna adapter, radio astronomy adapter, and other uses requiring high-frequency signals.
Check Stock

OWON ODP3063 Programmable DC Power Supply 3-ch Output, 30V / 6A, max Output Power 378W, 480x320 Pixels TFT Color LCD

  • Rated Current 6A/10A/20A/30A/40A/50A/100A(Optional).
  • Compact size, easy to install with stud connection.
  • Widely used in all kinds of 3-phase 3-wire industrial automation equipment, such as 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners etc..
  • If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

3M Specialty Adhesive Remover, 38987, Solvent-Based, Removes Reactive Adhesives, 15 fl oz

  • industrial strength adhesive remover specially formulated for quick removal of adhesives..
  • SPECIALLY FORMULATED: Specially formulated to remove adhesive labels from many substrates..
  • APPLICATIONS: Perfect for removing labeling from machinery.
  • PRODUCT SPECIFICATIONS: Industrial Adhesive Remover is available in a 15 wt oz aerosol can..
  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain.
  • household tools and electrical equipment..
Check Stock

ZESEN 10 Outlet Heavy Duty Workshop Metal Power Strip Surge Protector with 4ft Heavy Duty Cord, ETL Certified, Black

  • CONVENIENT OPTIONS: 1200 joule surge protection. 10 wide spaced (3.74 inches) AC outlets for bulky transformer/adapter use. 4 ft AC power cord with NEMA 5-15P plug provides to ability to reach distant outlets Keyhole slots on bottom panel provides convenient wall or desk mounting options..
  • AUTO SHUT-OFF SAFEGUARD: Power switch with integrated 15A circuit breaker. The auto shut-off safeguard feature cuts power from the surge protector to the connected equipment in the event of a catastrophic surg or when the unit has absorbed as much excess energy as it can, that no more damaging surges get through to the connected equipment..
  • VERSATILE: Metal construction, heavy duty power strips for workshop, enclosed garages, offices and schools. Surge Protector protects your PC, personal computer, laptop, printer, scanner, router, phone, fax, modem, television, lamp or home electronics from dangerous power surges. home offices, enclosed garages, industrial, retail, workbench applications..
  • 15A (amp), 125V (volt), 60Hz, 1875W (watt).
  • ETL Approved and Listed (Conforms to UL STD.NO.1363 and UL STD.NO.1449, Certified to CAN/CSA STD.C22.2 No. 21)..
Check Stock

3M PPS 2.0 Spray Gun Adapter #S43, 26139, 1/4 Inch Male, 19 Thread BSP, Connects Select Iwata and AirGunsa Paint Guns to PPS 2.0 Paint Spray System, 1 Pack

  • VERSATILE USES – PPS 2.0 is ideal for painting projects including cars, boats, furniture, equipment, home, arts and crafts.
  • RANGE OF APPLICATIONS – Use to apply paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more.
  • For industrial/occupational use only. Not for consumer sale or use..
Check Stock

ZESEN 12 Outlet Heavy Duty Workshop Metal Power Strip Surge Protector with 15ft Heavy Duty Cord, ETL Certified, Black

  • CONVENIENT OPTIONS: 1200 joule surge protection. 12 wide spaced (3.74 inches) AC outlets for bulky transformer/adapter use. 15 ft AC power cord with NEMA 5-15P plug provides to ability to reach distant outlets Keyhole slots on bottom panel provides convenient wall or desk mounting options..
  • AUTO SHUT-OFF SAFEGUARD: Power switch with integrated 15A circuit breaker. The auto shut-off safeguard feature cuts power from the surge protector to the connected equipment in the event of a catastrophic surg or when the unit has absorbed as much excess energy as it can, that no more damaging surges get through to the connected equipment..
  • VERSATILE: Metal construction, heavy duty power strips for workshop, enclosed garages, offices and schools. Surge Protector protects your PC, personal computer, laptop, printer, scanner, router, phone, fax, modem, television, lamp or home electronics from dangerous power surges. home offices, enclosed garages, industrial, retail, workbench applications..
  • 【Electrical Rating】15A (amp), 125V (volt), 60Hz, 1875W (watt).
  • ETL Approved and Listed (Conforms to UL STD.NO.1363 and UL STD.NO.1449, Certified to CAN/CSA STD.C22.2 No. 21)..
Check Stock

ESD Grounding Cable with Alligator Clip - 8 Feet - Ground Cable Cord with Clip, Earthing, Grounding, ESD, Static Control, EMF Radiation Fabrics, Plug into Your Outlet Grounding Adapter

  • ... CABLE - The grounding cord is 8ft long and can easily connect earthing mats, shoes, pc, gloves, computer, half sheet, beds laptop pads anti static wrist, strap, band, wall shields floor or equipment..
  • ANTI STATIC TESTED AND APPROVED – The high-quality wire cord is durable and strong for all applications including industrial use. The high quality alligator clip makes a strong electrical connection on mats, conductive fabrics, wrist straps, and more. Easily ground the wire by plugging into a grounding adapter in an electrical outlet..
  • PERFECT FOR EARTHING/ GROUNDING - Just plug into an outlet ground adapter and clip to the fabric and you are done! The cord 2.5 mm polyurethane coil insulation offers excellent protection and cord life..
  • EASY 2 STEP INSTALLATION – Simply plug into an outlet ground adapter and clip the banana plug on the other end onto your earthing device. The quickest and simplest way to ground/earth for protection against ESD, EMI, or other negative effects from isolation from earth..
Check Stock