Reviews Indexable Milling Cutter Bar

Half Round Keyway Milling Cutter, Hss Straight Shank T Slot Milling Cutter, 3 x 16 x 10mm Milling Cutter Milling Tool Milling Cutter

  • APPLICABLE MATERIALS: Widely used for milling steel, aluminum, copper and iron materials..
  • HIGH-SPEED STEEL MATERIAL: The high-speed steel material is used, and the metric system has a straight handle, which is easy to use and very practical..
  • HIGH WORK EFFICIENCY: Woodruff key-seat milling cutter, convenient for CNC machining, improve work efficiency..
  • T-SLOT MILLING CUTTER: T-slot milling cutter, stable structure, excellent performance and long service life..
  • SIZE: Woodruff key position cutter blade width is 3mm / 0.1in, outer diameter is about 16mm / 0.6in, and the handle diameter is 10 mm/0.4 inches..
Check Stock

2.5 Inch Face Milling Cutter Holder EMR 5R 63MM CNC end Milling Cutter + R8-FMB22 Shank Face Shell Mill Arbor + 4pcs RPMW1003 Carbide Inserts + 8mm Hexagon Wrench + T15 Wrench CNC Machine Tools

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

Face Mill Cutter Holder EMRW 6R 50-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner Used for Fough Machining of The Workpiece on The Milling Machine EMRW 6R50-22 1.96 Inch

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

AIMIMI Tungsten Steel Rod Wearable Specialty Metal Raw Materials Tungsten Steel Rod for Industry Electronic Machinery Aerospace (Length 200mm),11200mm

  • Good rigidity and high strength, strong wear resistance..
  • It can process materials with hardness below 55..
  • Widely used in tungsten steel mold, tools, such as punching needle..
  • High quality ultra-fine particle and ultra hard tungsten steel bar..
  • Used for tool grinding, can be grinded into cutting tools, such as cutter, milling cutter, bit cutter, etc..
Check Stock

1 Piece of 22mm R8 Shank Milling Cutter Shank, Horizontal Milling Cutter Arbor 22MM R8 Shank Milling Machine Spindle Suitable for Milling Machine Bridge Mouths Gear Milling Cutter Holder

  • Suitable for cutting machine/saw diameter: 22mm..
  • High hardness, determine the maximum use..
  • R8 shank short milling cutter holder, used for 22mm gear milling cutter/face milling cutter/longitudinal saw..
  • Features: Made of alloy spring steel and alloy forged steel, with long service life..
Check Stock