Reviews Inch Exhaust Tipss

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

ABN Exhaust Hanger Removal Pliers – 11In Rubber Exhaust Hanger Removal Tool Grommet Puller Muffler Rubber Hanger Plier

  • SERVICE YOUR EXHAUST SYSTEM: Use the ABN Rubber Hanger Pliers Exhaust Hanger Puller Removal Tool to remove the hanging bracket from the rubber hanger when servicing your vehicle exhaust system.
  • Spring-loaded muffler hanger tool pliers uses optimal leverage to separate parts for easy servicing and to protect your parts from damage.
  • OPTIMAL LEVERAGE FOR EASY USE: 25-degree offset handle and 2-inch (5.1cm) faceplate allows for a comfortable hold and optimal leverage when working in tight and hard to reach areas.
  • Compatible with most import and domestic vehicles that use exhaust hanger supports.
  • EASY TO USE: Place the faceplate against the rubber hanger around the metal bracket.
  • Align the 3/8 x 7/8 inch (.9 x 2.2cm) extension knob against the metal bracket then compress the muffler hanger pliers to push the bracket through the rubber hanger.
  • BUILT TO LAST: High carbon steel exhaust hanger pliers provide maximum strength, durability, and leverage.
  • Plier faceplate features .8 inch (2.1cm) opening to fit around your metal hanger brackets and against your rubber hanger grommet.
  • COMFORTABLE GRIP: 11-inch (27.9cm) long muffler hanger removal tool rubber hanger pliers feature 4-inch (10.2cm) rubber-dipped grip handles that provide comfort and a secure hold while yo....
Check Stock

SYKRSS Exhaust Tip Universal 2.5 Inlet 3 Outlet 12 Length Bolt Clamp On Design Stainless Steel Polished Diesel Exhaust Tail Pipe Tip

  • 2.5 inch inside diameter inlet, 3 inch outside diameter outlet, 12 inch overall length. NOTE : Universal exhaust tip fit 2.5" outside diameter pipe,....
  • Made of 304 stainless steel exhaust tip to avoid corrosion and deformation of the existing tailpipe, to prevent the heat back. black the lacquer that....
  • Clamp on design, easy to install, no drill needed. Makes it possible to remove the exhaust tip for cleaning. If you think it isn’t tight enough,....
  • Diesel exhaust tip, rolled edge and angled cut design. Perfectly decorates your vehicle. The unique styling adds a high-performance feel and look to....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the exhaust tail pipe tip, you can feel free to contact us via....
Check Stock

Upower 2.5 inch Inlet 4 inch Outlet Exhaust Tip 2.5' to 4' Exhaust Tailpipe Tips 9' Long Black Weld On 1.2mm Thick Stainless Steel 2 1/2 Inlet Rolled End (Pack of 2)

  • 【Upower Exhaust Tip Dimension】2.5 inch inlet diameter.
  • Overall Length:9 inch(2pcs Exhaust Tip are same).
  • 【Design】Weld On - Exhaust Tip Straight Cut- Rolled End.
  • 【Material】High Quality Exhaust Tip Tailpipe built with Stainless steel with black coating. Durable and Anti-corrosive,never Rusty..
  • 【Wide Application】Universal fits any 2 1/2" Outlet or 2.6" Inlet trucks car exhaust tail pipe..
  • 【1 Year Warranty】No instruction is included. Professional installation is highly recommended..
Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

doublesmt 6 Inch Thread Portable A/C AC Air Conditioner Exhaust Hose Coupler/Coupling/Connector, Support Clockwise/Counter-clockwise Thread, AC Hose Coupler Coupling Extension

  • ✅ Universal Clockwise Counterclockwise threaded coupler connects to a threaded hose. Exhaust Hose Coupler provide a best solution for putting my ac exhaust through the wall or your window..
  • ✅ Using this portable air conditioner connector to extend the exhaust duct no longer needs to distinguish between left-handed and right-handed. Left-handed and right-handed can be used. One left-handed and one right-handed can also be connected..
  • ✅ Ac air conditioner exhaust hose coupler:secure fit on 6-inch tubes with no leak. Compatible with Outer diameter 138mm. Inner diameter 6 inch..
  • ✅ Portable ac flex duct coupler inner: diameter does not take the thread into consideration and is the maximum diameter of a compatible tube..
  • ✅ Using this 6 inch portable ac connector to extend the exhaust duct no longer needs to distinguish between left-handed and right-handed. Left-handed and right-handed can be used. One left-handed and one right-handed can also be connected.6 inch or 5.9 inch is same product..
Check Stock

Modda Exhaust Hose for Portable Air Conditioner - 5 Inch Diameter - Universal - Flexible Counter-Clockwise AC Exhaust Hose (78 Inch Length)

  • - You will no longer sweat when setting up a portable air conditioner. Install the ac exhaust hose in seconds with our installation guide and enjoy the cool on these hot days.
  • – Our AC Exhaust Hose is compatible with most popular Portable Air Conditioner which has 5” exhaust such as LG, Frigidaire, Whynter, SPT, Honeywell, Haier, Emerson and Newair. PLEASE CHECK YOUR PORTABLE AC EXHAUST DIAMETER BEFORE PURCHASING.
  • – Keep your loved ones cool and happy on hot summer days with our durable and sturdy exhaust hose for portable air conditioner.
  • - With Our AC Exhaust Hose, Increase Your Portable Air Conditioner’s Performance By Keeping It Close to The Window. It fits easily to any space with its length from 17 inch to 78 inch..
  • -Take the Modda Exhaust Hose for your Portable Air Conditioner and make the perfect choice to stay cool on hot summer days. Each purchase is backed by our 100% Customer Satisfaction and Money Back Guarantee.
Check Stock

1PZ MG2-EG5 Exhaust Bolt and Gasket for GY6 50cc 70cc 90cc 110cc 125cc 150cc Scooters ATVs (Black)

  • 【Compatibility】For GY6 50cc 70cc 90cc 110cc 125cc 150cc Scooters ATVs Go Karts Moped Quad 4 Wheeler Dune Buggy Sandrail Taotao Sunl Coolster Jonway Roketa.
  • 【Size for reference】 Exhaust Studs: 32mm/1.26inch Long, 5.8mm/0.22inch Thread M6. Nuts/Caps: 32mm Long/1.26inch, 5.1mm/0.2inch Thread M6. Bronze Gasket: Outside Diameter 30mm/1.18inch, Inside Diameter 23.2mm/0.91inch, 5.6mm/0.22inch Thickness.
  • 【Extra thick gasket】 Bolt to bolt spacing: 49mm, Inner port: 27 mm, Double Sided, Double layer Extra Thick! Your exhaust will makes no more noise!.
  • 【Package include】1x Exhaust Gasket, 1x Extra Thick Gasket, 2 x Exhaust Studs, 2 x Nuts, 2 x Gaskets, 2 x Spring Gaskets in a 1PZ Brand Box.
  • 【Quality Guarantee】Hassle free return, Money back guarantee, Shop with Confidence!.
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock