Reviews Impeller Shaft

Corning 4504-15L Borosilicate Glass 15L Proculture Spinner Flask, with 140mm Shur-Loc Center Cap and 2 Angled Sidearms

Spinner flask has a 140mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm).
Borosilicate glass vessel has a Shur-Loc center screw cap and two 45GL orange polypropylene sidearm caps, with a polysulfone shaft and a Vortex Impeller paddle assembly.
Sidearm design permits easy access of 25 and 50mL pipets, while the side baffles enhance aeration and agitation of flask contents.
Reuseable, non-sterile flask has a patented 'stretch' impeller design that ensures optimal stirring.

Spinner flask has a 140mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm).
Borosilicate glass vessel has a Shur-Loc center screw cap and two 45GL orange polypropylene sidearm caps, with a polysulfone shaft and a Vortex Impeller paddle assembly.
Sidearm design permits easy access of 25 and 50mL pipets, while the side baffles enhance aeration and agitation of flask contents.
Reuseable, non-sterile flask has a patented 'stretch' impeller design that ensures optimal stirring.

...spark and anti-explosive. It is the best choice for open liquid drums. The mixer is easily clamped to the side of the bucket and the chucking angle can be adjusted. A good mixing effect can be achieved, and the forward steering gear can be attached to the mixer..
❥PROMISE- We can provide the stainless steel active impeller, please send us a message if you want a set of active impeller instead of the fixed impeller you see..
❥APPLICATION - Environmentally friendly pneumatic mixer products are widely used in food, aerospace manufacturing, shipbuilding, home appliances, painting, food industry, medical and other related industries..

CONTINUOUS-OPERATION POND PUMP: For powering pond waterfalls and streams with rugged debris-handling impeller that can pass debris up to 1/4 inch in diameter..
CLOG-FREE PERFORMANCE: Large basket minimizes blockage and maintenance..
ENERGY EFFICIENT: Unidirectional impeller and motor..
WEAR-RESISTANT: Motor has anti-corrosive ceramic shaft for longer life..
THREE SIZES: For ponds up to 1,500 gallons, up to 3,000 gallons and up to 4,000 gallons..

Suction 1-1/4" Discharge 1" 204 motor requires 4 GPM hydraulic flow on PC Closed and Open Center Systems Integral Needle Valve bypasses up to 9 GPM on Open Center Systems Standard with Viton Carbon/Ceramic Mechanical Seal Chemical Resistant Valox Impeller Cast Iron Pump Stainless Steel Shaft and Wear Ring Maximum Gallons Per Minute - 85 GPM Maximum PSI - 100 PSI Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period..

Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
Lift a tab on the top, give the cartridge a twist, and pull it out.
that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..

Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
Lift a tab on the top, give the cartridge a twist, and pull it out.
that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..

...of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM of Water @ 20 Ft. of Head: 50 Shaft Seal Material – Pumps: Silicon Carbide, Viton Agency Compliance: CSA C/US Duty: Continuous Voltage – Pumps: 208/230VAC Discharge NPT: 1-1/4″ F Max. Diameter Solids: 2 in Duty Cycle: Intermittent.
Switch Actuation: Tether Float Flow Rate @ 40 Ft. of Head: 48.0 gpm Rated Voltage: 208/230VAC Discharge Gender: Female Flow Rate @ 60 Ft. of Head: 42.0 gpm Discharge: 1-1/4″ FNPT Body Material: Cast Iron Flow Rate @....

1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation..
2.Max Working Pressure: 10bar(145PSI).Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉.
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on..
4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water..
5.Materials: Pump housing: Stainless Steel.
Impeller: Corrosion-resistant, Composite, PES.
Bearing: Carbon axial. › See more product details.