Reviews Ihome Switch Mode Power Supply

Network Cable Tester, Poe Cable Tester for CAT5e/CAT6/CAT6a, Ethernet Network Tester with NCV, NF-8209 Network Cable Tracker, Test Fault Distance Location and Length Measurement by TDR

  • ▶【Three scan modes】AC filter mode/ Analog mode/ PoE mode.
  • ▶【PoE testing】Test the information of standard PoE device, such as POE voltage, power supply polarity, power supply mode and also the type of PSE(af or at standard)..
  • ▶【Hub blink】Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch..
  • ▶【Length measurement】Cable length testing accuracy can be up to 98% and 200 m..
  • ▶【Cable continuity testing & NCV】Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V)..
Check Stock

AC Adapter Charger for Switch and Switch Lite,Fast Charging Kit with 5FT Charging Cord,Non-OEM 15V 2.6A Support TV Mode and Dock Station

  • TV Mode and NC 5.0 System Support - The Non-OEM N-Switch Charger Support TV & Handheld Mode, and also the NC 5.0 system. This Charger is also compatible with the new release N-Switch Lite 2022 Mini Version, Allows you enjoy a full home console experience anywhere you go..
  • 5ft Longer Cable - 1.5m 5ft Cord is longer than the original Switch comes with,which made it easier to charge your switch while playing.You can simultaneously play and charge your switch..
  • Convenient and Safe - Convenient charging on the go (no need to unplug official charger).Lightweight and portable. CE/FCC/ROHS Certificates, short circuit protection, over current protection, surge protection, overload protection, etc..
  • Full Compatibility - The Switch wall charger could not only charge your Switch Console, Switch Pro controller, Switch joycon dock, HDMI adapter but also Galaxy S8 and other USB Type C devices.
  • Fast Charging - High speed charge for 3 hours in case it's out of power, the switch power supply adapter allows you to charge the switch quickly and keeps it adequately powered while playing in docked mode and in handheld mode..
Check Stock

Vonets VAP11G-300 RJ45 Mini WiFi Wireless Bridge WiFi Repeater Routers wi-fi for Computer Networking Camera Monitor

  • WiFi intelligent bridge function, Wireless switch wired, wired switch wireless, intelligent switch..
  • WiFi intelligent repeater mode, it supports WiFi hot spot scan automatically and WiFi hotspot memory function..
  • 1 dedicated two in one power supply cable, with a set of power supply and a set of 10/100m adaptive Ethernet cable..
  • Antenna: Built-in Intelligent omnidirectional antenna..
  • Small and light weight,easy to hang on the wall such as the location that the wire should not be..
Check Stock

JOYO PXL-PRO Foot Pedal Controller with Power Supply

  • Bundle includes: JOYO PXL-PRO Foot Pedal Controller & Power Supply. This bundle contains 2 items (may be shipped separately)..
  • Total 8 LOOP channels, but can be used as dual independent 4-channel setting..
  • Built-in 4 triggers enable you to use them to switch the amps channel or effects mode settings..
  • JP-02 amplifier power supply has been well recognized by music lovers all over the world. Each of its circuits has independent short-circuit protection and independent short-circuit protection indicator. Even if any one of the roads is short-circuited, other branches can work normally. With a user-friendly LED control switch design, the LED array illuminates all effects on the board..
  • 7-channel 9V100mA output, 1 channel 9V500mA output and 12V, 18V output each, to meet the power supply requirements of any different effects..
Check Stock

JOYO PXL-PRO Foot Pedal Controller with Power Supply

  • Bundle includes: JOYO PXL-PRO Foot Pedal Controller & Power Supply. This bundle contains 2 items (may be shipped separately)..
  • Total 8 LOOP channels, but can be used as dual independent 4-channel setting..
  • Built-in 4 triggers enable you to use them to switch the amps channel or effects mode settings..
  • JP-02 amplifier power supply has been well recognized by music lovers all over the world. Each of its circuits has independent short-circuit protection and independent short-circuit protection indicator. Even if any one of the roads is short-circuited, other branches can work normally. With a user-friendly LED control switch design, the LED array illuminates all effects on the board..
  • 7-channel 9V100mA output, 1 channel 9V500mA output and 12V, 18V output each, to meet the power supply requirements of any different effects..
Check Stock

Aumox 5 Port Gigabit PoE Switch, 4 Port PoE 78W, Gigabit Ethernet Unmanaged Network Switch, Sturdy Metal Housing, Plug and Play, Traffic Optimization (SG305P)

  • 【4-Port 78W PoE】Designed with IEEE802.3af/at standard, Aumox PoE ethernet switch can transmit network data and power at the same time. This gigabit switch offers a maximum 78W PoE power output in total. Single-port POE power up to 30W, meets power supply requirements of various applications..
  • 【Gigabit Ethernet】Aumox network switch features 100/1000 Mbps ports, enables ultra-fast wired connectivity and instant large files transferring. Unmanaged gigabit switch, easy to setup, plug and play..
  • 【Reliable Fanless Metal Housing】Metal housing design makes the PoE switch reliable to use in different use cases. Fanless design give you a quiet and noise free environment..
  • 【One-Key VLAN】Supports one-key VLAN mode, and ports are isolated from each other. Effectively suppress network faults such as network storms, ensuring good network transmission performance and security..
  • 【Intelligent Recognition】Intelligently identify whether the IP terminal supports power supply,protect powered device..
Check Stock

PoE Texas GPOE-6AB | 6-Port Gigabit Poe Injector for 802.3af or 24 Volt Passive Devices | Power Supplies Available Seperately

  • Instantly upgrade your network switch or router to PoE using this 6 Port PoE midspan injector.
  • Use to power IP Phones, Access Points, IP cameras that require 10/100 or Gigabit Data.
  • Passive “always on” power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af or 24 volt passive PoE devices.
  • Power Supply NOT included - use with a UL certified 24v 48v or 56v power supply.
  • Backed by 1 year warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

Cudy 8 Port PoE+ Switch with 2 Uplink Ports 120W, 8 10/100Mbps PoE+@120W, Extend/VLAN Mode, 802.3af, 802.3at Standard, Fanless, Watchdog, Plug and Play FS1010P

  • Reliable 10/100Mbps IEEE 802.3af/802.3at compliant PoE+ switch with 120W total PoE Power supply. Ideal for small installations of 8 PoE devices (IP Phone, Wired surveillance camera, Wireless Access Point)..
  • PD Detect and Port Power Prioritization: PD Detect Auto-sensing technology delivers up to 32W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices. Port-Power-Prioritization technology guarantees continuous power supply of key nodes. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • VLAN mode support isolate 8 PoE+ port from each other. It is easy to manage and maintain which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

DC Power Supply Variable, 30V 10A Bench Power Supply with Memories, Output Switch, Adjustable Switching Regulated Power Supply with 4-Digits Display, Encoder Adjustment Knob

  • ... more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: Many safety measures are adopt in Kungber DC bench power supply- Grounding wire, Leakage protection, Thermal protection, Voltage overload, Power overload and Short-circuit protection. Kungber power supply use premium electronic components, provide reliable working status and prolong the life of product effectively. When the working temperature is more than 122℉/50℃,the int....
Check Stock