Reviews Idle Valve

ACCEL 140033 Ignition Coil - Supercoil - 2004-2008 Ford 4.6L/5.4L/6.8L 3-Valve Engines - Yellow -Individual

  • 10 to 15 percent more power than aging stock coils.
  • Delivers more torque quicker starts instant throttle response better acceleration a smoother idle and improved gas mileage.
  • Engineered specifically for 2004 to 2008 4.6L and 5.4L Ford 3 valve modular engines.
  • Reduces misfire and eliminates hesitation.
  • Completely redesigned highly conductive direct plug replacement.
Check Stock

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Michigan Motorsports Valve Seals

  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.
Check Stock

gohantee 7.3 Powerstroke Fuel Injection Pressure Regulator IPR Valve with ICP Control Sensor and Pigtail Connector Compatible with Ford F250 F350 F450 F550 F650 F750, Replace# F81A9C968AA 1829856C91

  • 【FITMENT】The injector pressure regulator valve replacements for ford 7.3L powerstroke only - Fit for Ford E-350 Club Wagon 2003丨Ford F-250 F-350 F-450 Super Duty 1999-2003丨Ford F-750 1999-2003丨Ford E-350 Econoline Club Wagon 1997-2002丨Ford E-550 Econoline Club Wagon 2002丨Ford E-450 Econoline Super Duty Stripped 2001丨Ford Excursion 2001丨Ford F-650 2000-2001丨Ford E-450 Econoline Super Duty 2000丨Ford F-250 F-350 1997..
  • 【REPLACES PART#】 7.3 powerstroke IPR valve replaces part #: F81A9C968AA / AP63402 / F81Z9C968AA / F81Z9C968AB /F81Z-9C968-AB / F5TZ9C968A / 1829856C91 / 1836412C91 / 1841217C91 / 1841086C91 / CM5013 / CM-5013..
  • 【DURABLE + PACKAGE INCLEDE】 7.3L ipr valve fuel injection pressure regulator + ICP control sensor + pigtail connector kit have passed undergoes stringent testing to ensure high quality, durable and reliable under extreme conditions..
  • 【REPLACEMENT NECESSITY】The ipr valve can be located behind the engine attached to the high pressure oil pump (HPOP). It is a solenoid valve that allows high pressure oil to enter the injector by controlling the pressure in the high pressure oil system. Faulty IPR valve can lead to an unstable engine idle, stalling out, and losing overall horsepower..
Check Stock

LSAILON 2H1296 Equipment Fuel Injection Idle Air Control Valve Compatible with Alfa Romeo 164/ Spider/Fiat Uno, Peugeot, Saab 900/9000, Volvo 240/244/245/740/ 760/780/ 940/ S70/ V70

  • COMPATIBILITY INFORMATION：New Idle Speed Control fit for 1991-1993 Alfa, Romeo 164, 1990-1994 Alfa Romeo Spider, 2013-2015 Fiat Uno, 2015 Peugeot 2008,2014 Peugeot 207, 2014-2015 Peugeot 208/ 208 GT, 2011-2015 Peugeot 3008, 2012-2015 Peugeot 508, 1988-97 Saab 900, 1990-1991 1994-1997 Saab 9000, 1990-93 Volvo 240, 1989 Volvo 244/245, 1989-1992 Volvo 740, 1990 Volvo 760, 1990-1991 Volvo 780, 1991-1995 Volvo 940, 1998-00 Volvo S70/ V70.
  • THE MEANING OF IAC MOTOR: Idle speed control is to control the amount of idle air. Apart from stabilizing the basic idle speed, it also simplifies the intake system.Operating accurately, simple installation..
  • IAC MOTOR PARAMETER: The idle air control motor Kit with Interchange Part Number:2H1296, AC4158, 1389618, 1389618-0, 1398618, 4503363, 7586019, 60513207, 6081337, 3450181.Before purchase this parts, Please verify the correct OEM part number..
  • PREMIUM FEATURES: The purpose of the idle speed control is to keep the engine idle speed as low as possible while ensuring the engine emission requirements and the operation is stable, so as to reduce the fuel consumption at idle speed..
  • BUYER NOTICE: Please use the compatibility chart below to double check if these will work for your car.We provide ONE YEAR WARRANTY for all our ....
Check Stock

OKAY MOTOR IAC Idle Air Control Valve for Chevrolet GMC Pontiac Cadillac Trucks 4.8L 5.3L 5.7L 6.0L V8

  • Fuel Injection Idle Air Control Valve For Chevy Chevrolet GMC Cadillac Pontiac 4.3L 5.3L 5.7L 6.0L V8.
  • Description: Chevy Escalade Avalanche Silverado Suburban GMC Yukon Sierra Cadillac Pontiac.
  • OEM Part Number: AC234, 17113598, 89053319.
  • 180-days manufacturer type warranty limited.
Check Stock

Vapor Canister Purge Valve - Replaces CX-2409, AU5Z9C915B, AU5Z-9C915-B, 911-222 - Compatible with Ford, Mazda, Lincoln, Mercury - Edge, Explorer, Escape, F150, Focus, Fusion, Mustang, Taurus, MKX

  • Replacement Evaporative Emissions Canister Purge Valve - A critical component of the EVAP system, the canister purge valve regulates the flow of fuel vapours being released for the engine to burn instead of the vapours just being released into the atmosphere. When your canister purge valve is bad it may trigger a CEL (Check Engine Light) with a code..
  • Compatible Replacement for Ford, Mazda, Lincoln & Mercury Vehicles - 2011-2018 Edge 3.5L | 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Ford Escape 2.5L | 2011-2019 Explorer 3.5L | 2011-2017 F-150 5.0L | 2015-2017 F-150 3.5L | 2013-2019 F-250 Super Duty 6.2L | 2013-2019 F-350 Super Duty 6.2L | 2010-2019 Fusion 2.5L | 2013-2019 Flex 3.5L | 2011-2017 Mustang 5.0L | 2013-2019 Taurus 3.5L | & more. See below for a full vehicle list..
  • Replaces Part# CX-2409, CP758, CX2383, AU5Z9C915B, 9C915, AU5A-9G866-AB, 9U5Z9C915H, 9U5Z-9C915-H, 911-222, AU5Z9C915A, AU5Z9C915B commonly found on popular 2.0L, 2.5L, 3.0L, 3.5L, 3.7L, 5.0L, 5.2L, 5.4, 5.8L, 6.2L models with year models 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19. The canister purge evap valve can easily be located inside the engine bay usuall....
Check Stock

RanBB Fuel Injector Cleaner, Auto Non-Dismantle Fuel Injector Cleaner Tester Air Intake System Cleaning Tool with Carrying Case (GX100 Senior)

  • ✎When the car starts to be unstable and idle and difficult to start, at the same time fuel consumption increases. This may be due to the carbon deposition, residual deposit happening in the fuel system, which affects the normal work. Fuel from disassembly cleaning equipment, the use of simple operation, fast..
  • ✎The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle..
  • ✎Quick joint anti-corrosion, wear-resistant treatment, safe and quick connection..
  • ✎Add liquid and exhaust multi-function valve, spin open can add liquid, light press can slowly decompression, heavy press can be quickly exhaust..
  • ✎To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI..
Check Stock

08-0045 Idle Screw Adjuster Kit for Yamaha YFS200 Blaster YFZ350 Banshee 1987-2006

  • Fitment - 08-0045, Idle screw kit for Yamaha 1988-2006 YFS200 Blaster.
  • Fitment - 08-0045, Idle adjuster kit for Yamaha 1987-2006 YFZ350 Banshee.
  • Kit Includes - a drill bit (#6), thread tap (6 millimeter x .75 millimeter), 2 idle screws with lock nuts.
  • Please Note - Installing this kit requires drilling and tapping the carburetor body.
  • Service - We offer idle screw adjuster tool 12 month service, any questions about idle screw adjuster tool, please contact us by email, we will reply....
Check Stock

NEW QUICK FUEL TECHNOLOGY BRAWLER STREET CARBURETOR,RED BILLET BLACK FINISH,MECHANICAL SECONDARIES,750 CFM,4150 MODEL,COMPATIBLE WITH GASOLINE

  • ... Red | Booster: Down Leg | Brand: Brawler | CFM: 600 | Choke: Electric | Circuit: 2 | Finish: Black | Fuel: Gas | Fuel Inlet: Dual | Fuel System: Carbureted | High Speed Air Bleed: 28:28 | Idle Air Bleed Size: 70:70 | Marine Use: No | Material: Aluminum | Model: Brawler Street | Primary Main Jet: 66 | Primary Power Valve: 6.5 | Product Type: Carburetor | Secondaries: Mechanical | Secondary Main Jet: 74 | Secondary Pump Nozzle Size: 28.
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB & Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932..
Check Stock