Reviews Ide To Usb Cable For Mac

SATA/IDE to USB 3.0 Adapter, External Hard Drive Reader for Universal 2.5/3.5 Inch IDE and SATA HDD SSD, 5.25' CD/DVD Drives, Hard Drive Converter with Power Adapter Support 6TB

... turn on the disk(set the master disk and the slave disk).
【12V 2A Stable Power Supply】: The extra power adapter for the SATA IDE drive adapter is greatly appreciated because without it could not power larger form-factor SATA drives or IDE drives and likely others. for IDE drives, you have to use the 4-pin power cable adapter to a plugin.

Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s. Integrated all-in-1 card reader (XD card / TF card / MS (Duo / Pro) card / CF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT ....

Supports 2.5-Inch IDE or 3.5-Inch IDE/SATA hard drives.
Supports 5.25-Inch Optical CD/DVD/Blu-Ray drives.
USB 2.0 connection allows for data transfer speed of up to 480Mbps.
Supported OS: Windows 2000 / XP / Vista / 7 / 8 / 8.1 / 10 and Mac OS 9.2 and above.

【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....

Quickly Access SATA SSD/HDD: Can add drive space to your laptop by connecting to a 2.5"SSD or HDD visa using this SATA to USB cable, and you can keep old hard drive as an external memory to perform backups, create disk images, implement data recoveries, and transfer content to your laptop.
Save Time with UASP: With UASP you can utilize the full potential of a SATA III SSD or HDD.The SATA to USB adapter supports USB 3.0 data transfer speeds of 6Gbps, with 70% faster than conventional USB 3.0, Backward compatible with USB 2.0 / 1.1.
Easy to Use: Hot-swappable, Plug and Play, no drivers needed. No need additional power cable. you can carry and use this usb to sata adapter anywhere (This adapter not compatible with 3.5" SSD & HDD, Not support IDE interface!).
Compatibility System: USB to SATA converter support Windows 98/2000/XP/Vista/7/8/8.1, Mac OS X or above, and Linux. NOTE: for new drive, please formatting before use, for old hard drive, be sure it can work.
More Details: LED light indicates Power and Activity status. Red Light: Power status. Blue Light: Activity status. overall length: 9 inch (23cm).

Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive.
Connect your SATA / IDE device to your computer through a USB port.
Compatible Windows PC or Mac with Available USB 3.0 /2.0/1.1 Port.

Universal SATA/IDE Hard Drive Adapter: It can support 2.5 "/3.5" SATA I/II/III Hard Drive and 2.5'' SATA SSD.
Super Speed USB 3.0: USB 3.0 supports transfer rates of up to 5Gbps(The actual transmission speed is limited by the setting of the device....
Pulg & Play: Support Plug and play & hot swap, On/Off power Switch for Hard drives protection. Tips: Some IDE hard drive is old, you need to set....
System Compatibility: Support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux etc. Support devices PS4/Xbox/TV/monitoring equipment..
Customer Focus: Our goal is to give you a 100% satisfaction shopping experience, so we provide 18 months warranty.

Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive.
Connect your SATA / IDE device to your computer through a USB port..
Compatible Windows PC or Mac with Available USB 3.0 /2.0/1.1 Port.
Hot-Swappable: Plug and Play without Rebooting.

Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
The IDE interface is a 44-pin/2.0mm male connector..
The SD card can become an OS and application software that can directly start the device.
Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..