Reviews Ide Hdd Case

FIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)

  • 【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
  • 【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
  • 【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
  • 【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
  • 【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....
Check Stock

PASOW 2.5'' 3.5'' to 5.25'' SSD HDD Mounting Bracket Internal Hard Disk Drive Bays Holder Adapter for PC

  • You can use it for 2 drives,2.5" SSD and 3.5" HDD.Allow to mount a 3.5 inch drive and a 2.5 inch drive (or a 8cm fan) to a 5.25 inch drive bay in your computer case at the same time..
  • Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive)..
  • Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk..
  • Mounting the 2.5'' drive firstly when you mount 3.5'' drive and 2.5'' drive at the same time,you can mount 8cm fan at the back if not mount 2.5'' hard disk..
  • Made of plastic body,quick and easy installation.
Check Stock

Xiwai SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5 Hard Disk Drive

  • SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5" Hard Disk Drive  2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board.
  • Works with all SATA Drives up to 500GB  Supports IDE 66/100/133MB/s.
  • No need for an extra power supply.  44 Pin IDE connector powers the Drive no other cables or adapters are needed.  No driver needed, plug and play,....
  • Great for all Mini Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives.  Adapter is good for up grading an old....
  • Dimensions: 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
Check Stock

StarTech.com USB 3.0 Hard Drive Eraser Dock & IDE Hard Drive Adaptor

  • THE STARTECH.COM ADVANTAGE: StarTech.com offers a 2-year warranty and free lifetime technical support on this hot-swappable HDD eraser and has been....
  • PLUG & PLAY: This standalone hard drive eraser dock lets you erase a 2.5" or 3.5" SATA hard drive or solid-state drive, without having to connect to a....
  • SECURELY WIPE SATA DRIVES: This business grade external USB 3.0 (USB 3.1 Gen 1) hard drive eraser supports nine erase modes, and can erase IDE, mSATA....
  • Unique design allows any 2.5/3.5in IDE hard drive to be used and inserted (upright) into a SATA HDD docking station or duplicator drive bay.
  • Backed by a StarTech 2-year warranty and free lifetime technical support.
Check Stock

AGPtek SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5", Compatible with USB 1.1/2.0/3.0, with External AC Power Adapter Included

  • ◆ USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
  • ◆Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your ide to usb adapter to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
  • ◆ Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
  • ◆ AGPtEK sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable..
  • ◆ This usb sata ide adapter is easy to use and plug & play, no drivers needed..
Check Stock

USB 3.0 to SATA/IDE Hard Drive Adapter Hard Drive Reader for Universal 2.5 3.5-Inch IDE and SATA External HDD/SSD with 12V 2A Power Supply Support 6TB

  • 【Universal IDE SATA to USB 3.0 Adapter】: Hard drive reader support SATA 2.5"/3.5" HDD.
  • 2.5"/3.5" IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW....
  • 【SuperSpeed up to 5Gbps】: IDE to USB adapter supports a 5Gbps high-speed transfer rate (up to 10x as fast as USB 2.0), which is 70% Faster than....
  • 【Broad Compatibility】: External hard drive to usb adapter support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux, etc. Support devises....
  • 【Huge Capacity Supportive】: Designed to be lightweight and compact. enables access to 2 drives simultaneously. LED indicator light shows Power and....
  • 【Comes with Power Supply & OTG Adapter】: Included 12V 2A power cable is for providing a stable electricity supply. Note: 4PIN Power Cable is....
Check Stock

USECL 2.5\ to 3.5\ Hard Drive Adapter Conversion Bays Metal Mounting Bracket ，Apply to Desktop Computer Mounting.（4 Pack）

  • 2.5" To 3.5" Mounting Adapter Bracket, works with HDD/SSD.
  • Maximize the internal space of your computer case for efficient usage..
  • 8pcs screws included for mounting the bracking onto the PC case.
  • Support 2.5 "-3.5"hard drives such as, SATA, IDE, or SSD drives..
Check Stock

Generic SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for 2.5/3.5 Inch Hard Drive/5 inch Optical Drive with External AC Power Adapter

  • USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
  • Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your SATA / IDE device to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
  • Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
  • USB 2.0 to IDE/SATA Cable can be easily connected to the IDE device / SATA device and make the hard disk device more portable. Also, it is easy to use and plug & play, no drivers needed..
  • Satisfaction Guarantee: We always want to offer striving hard to provide our customers with best shopping experience. If you are not satisfied for any reason, please do not hesitate to contact us. We will offer you a satisfactory solution. Thank you!.
Check Stock

MANHATTAN SCSI ADAPTER DB50/HP F, DB25 M, IADAP SCSI -450

  • Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【10 Gbps Ultra-fast Transfer】USB 3.2 Gen 2 M.2 SSD Enclosure can transfer large files to your computer within seconds with 10Gbps transfer speed. 32Gbps PCIE 3.0 connects to M.2 NVME SSD. Support UASP/Trim and maximize the data transmission..
  • 【Compatibility】Compatible for solid state drivers size 2242/2260/2280. Support Windows 7/ 8/ 8.1/ 10/ Linux/ Mac OS 10.10.5 or higher Version. The SSD enclosure is suitable for SSD based on M-Key and M+B Key NVME PCIE. NOT compatible with B Key NVME, M and B&M Keys SATA, PCIe AHCI SSD, mSATA SSD and non-M.2 form factor SSDs..
  • 【Safe and Stable】USB adapter built-in short-circuit, over-current and multiple protections to ensure the safety of your SSD and data. Better heat dissipation to keep the temperature in normal range, which will not damage the M.2 SSD..
Check Stock