Reviews Ide Hard Drive Usb

Tccmebius TCC-S865 USB 3.0 to SATA IDE Dual Slots External Transparent Hard Drive Docking Station with Card Reader and 2 Ports USB 3.0 Hub for 2.5 3.5 Inch IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader (TF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check Stock

SABRENT USB 3.0 to SATA/IDE 2.5/3.5/5.25-INCH Hard Drive Converter with Power Supply & LED Activity Lights [4TB Support] USB-DSC9

  • Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive.
  • Connect your SATA / IDE device to your computer through a USB port..
  • Compatible Windows PC or Mac with Available USB 3.0 /2.0/1.1 Port.
  • Hot-Swappable: Plug and Play without Rebooting.
Check Stock

Hard Drive Docking Station, Tccmebius TCC-S862-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s. Integrated all-in-1 card reader (XD card / TF card / MS (Duo / Pro) card / CF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT ....
Check Stock

USB 3.0 to SATA/IDE Hard Drive Adapter Hard Drive Reader for Universal 2.5 3.5-Inch IDE and SATA External HDD/SSD with 12V 2A Power Supply Support 6TB

  • 【Universal IDE SATA to USB 3.0 Adapter】: Hard drive reader support SATA 2.5"/3.5" HDD.
  • 2.5"/3.5" IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW....
  • 【SuperSpeed up to 5Gbps】: IDE to USB adapter supports a 5Gbps high-speed transfer rate (up to 10x as fast as USB 2.0), which is 70% Faster than....
  • 【Broad Compatibility】: External hard drive to usb adapter support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux, etc. Support devises....
  • 【Huge Capacity Supportive】: Designed to be lightweight and compact. enables access to 2 drives simultaneously. LED indicator light shows Power and....
  • 【Comes with Power Supply & OTG Adapter】: Included 12V 2A power cable is for providing a stable electricity supply. Note: 4PIN Power Cable is....
Check Stock

FIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)

  • 【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
  • 【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
  • 【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
  • 【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
  • 【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....
Check Stock

MANHATTAN SCSI ADAPTER DB50/HP F, DB25 M, IADAP SCSI -450

  • Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【10 Gbps Ultra-fast Transfer】USB 3.2 Gen 2 M.2 SSD Enclosure can transfer large files to your computer within seconds with 10Gbps transfer speed. 32Gbps PCIE 3.0 connects to M.2 NVME SSD. Support UASP/Trim and maximize the data transmission..
  • 【Compatibility】Compatible for solid state drivers size 2242/2260/2280. Support Windows 7/ 8/ 8.1/ 10/ Linux/ Mac OS 10.10.5 or higher Version. The SSD enclosure is suitable for SSD based on M-Key and M+B Key NVME PCIE. NOT compatible with B Key NVME, M and B&M Keys SATA, PCIe AHCI SSD, mSATA SSD and non-M.2 form factor SSDs..
  • 【Safe and Stable】USB adapter built-in short-circuit, over-current and multiple protections to ensure the safety of your SSD and data. Better heat dissipation to keep the temperature in normal range, which will not damage the M.2 SSD..
Check Stock

Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Fit for Universal 2.5/3.5 HDD/SSD Hard Drive Disk IDE to USB Adapter with 12V/2A Power Supply and USB 3.0 Cable UA2001

  • External hard Drive Reader: support 2.5/3.5 SATA HDD and SSD, 2.5 /3.5 IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVD+RW Optical Drive, dual-head IDE....
  • Widely Compatibility: This USB 3.0 to IDE and SATA adapter allow to operate 3 HDDs simultaneously, It is compatible with 2.5"/3. 5" Ide/SATA hard....
  • High speed transfer: data transfer up to 5Gbps. Backward compatible with USB 2.0/1.1..
  • Support system: Windows XP/Vista/7/8/10(32bit and 64bit).
  • Linux,Mac OS 10. X (OTB mode isn't applicable for W8 and Mac).
  • on/off switch for HDD protection. Led light shows power and activity status..
Check Stock

USECL Laptop SATA to IDE Adapter 2.5 Inch Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port Converter Vertical Type

  • SATA hard drive can be detected and used as a standard 2.5" IDE hard drive..
  • Convert all SATA type devices CD-ROM/CD-RW/DVD-ROM/DVD-RAM/DVD-RW/HDD into 2.5" IDE device..
  • Allow to connect a 7+15P SATA hard drive to a 44P IDE connector..
  • 7+15 Pin female design allows to connect directly to SATA hard drive without cables..
  • no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support IDE/ATAPI....
Check Stock

SABRENT 3.5-Inch to x2 SSD / 2.5-Inch Internal Hard Drive Mounting Kit [SATA and Power Cables Included]+ USB 3.0 to SSD/SATA/IDE 2.5/3.5/5.25-INCH Hard Drive Converter with UL Power Supply & LED Acti

  • Molex 4 Pin to x2 15 Pin SATA Power Splitter Cable and x2 SATA Cables (Data) included.
  • Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive.
  • Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!!.
  • Connect your SATA / IDE device to your computer through a USB port.
Check Stock