Reviews Ide Connector

WSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD

  • Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
  • Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
  • The IDE interface is a 44-pin/2.0mm male connector..
  • The SD card can become an OS and application software that can directly start the device.
  • Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
  • Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
  • Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..
Check Stock

Optimal Shop 20+4 Pin LCD Computer Power Supply Tester for SATA IDE HDD ATX ITX BYI Connectors-Black

  • 8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector..
  • Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance..
  • 1.8″ LCD screen: The output voltage is displayed on the 1.8″ LCD screen, which is easy to read (1.8″ LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself..
  • Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know..
  • When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V)..
Check Stock

AITIAO 2Pcs SD Card to 2.5 Inch IDE Adapter SD SDHC SDXC MMC Memory Card Converter TF Memory Card to IDE 44Pin Male Adapter to Laptop HDD for DOS/Linux/Windows 98SE, Me, 2000, XP and for Vista.

  • The SD Card to 2.5 Inch IDE Adapter Adapt SD/MMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error..
  • Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 2.5" hard disk.Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
  • Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
  • IDE Adapter supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm..
  • Attention: This SD Card to 2.5 Inch IDE Adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock

Cablecc 15Pin SATA Male Power Cable to Molex 4-pin IDE Hard Disk Drive Power Adapter

  • CY 15Pin SATA Male Power Cable to Molex 4-pin IDE Hard Disk Drive Power Adapter.
  • This adapter is used for connecting a SATA power connector of the power supply to standard IDE 4-pin Hard Drive or Optical Drive..
Check Stock

Diyeeni SATA Network Adapter, SATA Interface Network Card Adapter, Hard Disk Adapter for PS2, with Free McBoot with 64MB FMCBV1.966 Memory Card, Supports up to 2TB SATA HDD…

  • 【For PS2】SATA network adapter with free McBoot with 64MB FMCBV1.966 memory card. You can connect a SATA hard drive (no IDE) directly to the game console and load the program, no disc required to play games from the HDD..
  • 【Durable】Compared to traditional SATA network adapters, SATA hard drive connector plugs and sockets are made of harder material, waterproof, longer lifespan, and less prone to damage..
  • 【Professional】The HDD adapter is compatible with the for PlayStation 2 console’s SATA network. Supports up to 2TB SATA HDD (2.5″ and 3.5″). The surface of the 2TB SATA HDD connector plug and socket has a HASL process and uses an advanced main control chip..
  • 【Strong Anti Interference Ability】The SATA hard disk interface network adapter can improve the anti interference ability and reduce the interference to other devices. And connect a SATA HDD (no IDE) to your console..
  • 【HDD Adapter Instructions】You can connect a SATA HDD (without IDE) to your console and use the loader to play HDD games without a disc..
Check Stock

Monoprice SCSI (HPDB) 68 Female to IDC 50 Female Adapter (100076)

  • The IDC 50 connector is a 50-pin 8-bit SCSI "header" connector used for internal-type ribbon cables.
  • It is also known as the "Alterative 2" connector.
  • It has parallel 25-pin rows and resembles an older ATA/IDE drive cable except that it is wider and has more pins.
  • The HPDB 68 connector is a 68-pin 16-bit SCSI-2 connector used for both internal and external connections (plastic for internal and metal for external).
  • It has parallel 34-pin rows but has the pins much closer together and is therefore narrower than the IDC 50 connector.
Check Stock

Acogedor SATA Interface Network Adapter, PS2 Network Adapter HDD Adapter FMCB Version 1.953 Memory Card 64MB Free McBoot 2.5inch 3.5inch Hard Disk Adapter

  • HIGH QUALITY MATERIAL: This adapter is compatible with for PS2 consoles compared to traditional SATA network adapters. SATA HDD connector plugs and sockets are made of harder material and last longer and are less prone to damage. You can use the SATA HDD adapter with confidence..
  • For PS2 ADAPTER AND MEMORY CARD: SATA network designed for PS2 consoles and comes with 64MB FMCB V1.953 memory card free McBoot. with this adapter you can connect SATA hard disk (no IDE) directly to the console and load programs without discs to play games from HDD..
  • COMPATIBLE DEVICES: For PS2 HDD adapter, the HDD adapter is compatible with the SATA network of the for PS2 console. The network adapter can support up to 2TB SATA HDD (2.5 inch and 3.5 inch). 2TB SATA HDD connector plug socket cover with HASL process..
  • ANTI INTERFERENCE: SATA HDD interface network SATA interface network adapter can improve the anti interference ability and reduce the interference to other devices. And connect SATA HDD (no IDE) to your console and use the loader to play HDD games without discs..
  • HDD ADAPTER DESCRIPTION: SATA interface HDD adapter uses an advanced master control chip. You can connect SATA HDD (without IDE) to your console and use the loader to play HDD games without discs, giving you....
Check Stock

Molex Splitter 4 Pin IDE Power Supply Extension Cable 1 to 3 Y Splitter 6.7 inch

  • Compatible with all IDE hard drives or other devices (CD/DVD-ROM drives etc).
  • Two or three devices can be connected at the same time through a single interface.
  • Connector 1: 1 pcs molex 4 pin male power connector.
  • Connector 2: 3 pcs molex 4 pin female power connector.
  • Please confirm whether the PSU meets the maximum power consumption of the increased device before use.
Check Stock

GODSHARK SD Card to 2.5 Inch IDE Adapter, SDHC SDXC MMC Memory Card Converter to Laptop HDD 44 Pin Male PATA Port

  • Adapt SD/MMC flash memory card to a super compact, cost efficient, anti-shock, low power consumption, no acoustic noise and fast access time HDD.
  • Enables SD/MMC card as a normal IDE 2.5" hard disk.
  • Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
  • Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
  • Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm.Attention: This adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock