Reviews Icarsoft Cr Pro

HICTOP CR-10 Glass Bed Double Sided Upgraded Tempered Glass Bed 310x310mm for CR-10 CR-10S CR-10S pro V2 3D Printer

  • HICTOP CR-10s pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or....
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if....
  • The size of HICTOP glass bed is 310*310mm（12.2*12.2 inch）, it can work with Creality 3D printers such as the CR-10, CR-10S, CR-10S pro, CR-10 V2,....
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a....
Check Stock

Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface

  • ...igh-temperature stability, flame retardant, heat resistance, high strength, wear resistance, and good printing stability..
  • 【Wide Application】Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 310*320mm spring steel sheet 3d printer bed works well with CR-10S PRO/ CR-10 V2/ CR-10 V3/ CR-X/ CR-X Pro/ CR-10S PRO V2/ Ender-3 Max/ Ender-3 Max Neo and other same-sized beds..
  • 【Great Adhesion & Easy Take Mold】Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!.
  • 【Simple Installation】Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker..
Check Stock

CR Touch 2023 Upgrade Noiseless Auto Leveling, with Beginner Software Pack, Creality 3D Printer Bed Leveling Sensor Kit for Ender 3 Pro/ Ender 3 V2/ Ender 3/ Ender 5/ Ender 5 Pro

  • 【Suitable for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers】The upgraded CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer...
  • 【Independent Development】Compared with traditional BLTouch or 3D Touch, CR Touch is upgraded to a metal probe with noise-reducing silicone ring. 360° translucent protective shell makes CR Touch safer and more exquisite. Positioning accuracy ≤0.04mm, Automatic detection and leveling, can be reused for over 100,000 times..
  • 【Strong compatibility】CR Touch 3d printer auto leveling, Compatible with PEI / sticker bed / glass bed / metal bed.
  • 【Easy to install and easy to use】An SD card comes with our product, which contains all you need for the installation, so that the CR Touch is a plug-and-play upgrade part for your 3D printer..
  • 【After-sales Service】If you encounter unsolvable problems during installation and use, feel free to contact us, the technologist will provide you with detailed solutions within 24 hours..
Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit, Upgrade Low Noise and More Durable Than BL Touch, for 3D Printer Ender 3 Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro

  • ...t Detection】Crealtiy CR Touch adopts multi-point detection intelligent compensation technology. CR touch is an automatic leveling accessory for 3d printer platform independently developed by Crealtiy. It is more stable than the traditional BL touch leveling function, and you can get better quality with less money product upgrade..
  • 【Strong Compatibility】CR Touch 3d printer auto-leveling is compatible with all printing platform materials such as PEI/sticker bed/glass bed/metal bed, etc. No matter what kind of printing platform material you use, it can adapt and work stably..
  • 【Longer Service Life】 Crealtiy CR Touch has been upgraded to a metal probe, which is more durable and can reduce the wear caused by daily use, thereby greatly increasing the service life of the probe, 0-6mm extension length, 0.04mm repeat positioning accuracy, automatic leveling , can be reused more than 100,000 times..
  • 【Compatible Models】This kit includes 3 different mounting brackets and extension cables. You can install it easily, and it can be adapted to more Crealtiy 3D printers. CR Touch works with Ender 3/Ender 3 V2/Ender3 Pro/Ender 3 Max/Ender 3S/Ender 5/Ender 5 Pro/CR 10 V3/CR-10. It should be noted that it is only applicable to 32-bit V4.2.2/V4.2.7 motherboard ....
Check Stock

Athletivi Speed & Agility Training Set - Ladder Kit with Fixed-Rungs, Cones, and Resistance Parachute Improves Coordination and Speed. Set for Football, Soccer, Fitness Workout Athletes.

  • 【Widely Application】This Creality cr touch automatic leveling kit comes with 3 mounting brackets, making it compatible with various types of 3D printers, such as Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ Ender 5 Plus / CR-10 series. (Note:Only applicable to 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers).
  • 【Easy to install and easy to use】With instructions, you can choose a suitable mounting bracket to install this CR Touch Auto Leveling Kit to your 3D printer, and download the CR Touch program from the Creative 3D official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on..
  • 【Independent research and development Stable function】CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times..
Check Stock

Official Creality Bowden Tube 1M, 3D Printer PTFE Tube Teflon Bowden Tubing Upgrades for 1.75mm Filament Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series (1M)

  • 【Best Performance】 Creality Bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • 【Compatible with More Filaments】 PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • 【Product Parameter】Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems..
  • 【Highly Compatible】 Compatible with Creality 3D printer:Ender-3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender-5/Ender 5 Pro/Ender 5 Plus/ Ender-6/CR-10/CR-10S/CR-10 V2/CR-10 V3/CR-10 S4/CR-10 S5..
  • 【Technical Support】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

HICTOP Upgraded Metal Leveling Nuts with Hot Bed Springs for Ender 3/3 Pro/3 V2 Ender 5/5 Plus/Pro CR-10 CR10S/10S Pro CR 20 3D Printer

  • The metal leveling nuts are more substantial than the cheap black plastic ones..
  • The red color ends some of the fumblings by feel to locate them, the wheels are nice too, the knurling is nice and grippy and it's pretty easy to turn them too.
  • The springs are a bit longer than the one on the printer, which gave you some more adjustment range for leveling. The increased tension means less slop when adjusting. The longer springs mean you will have to manually adjust your zstop so that your nozzle doesn't crash into your bed and potentially ruin both.
  • Everything feels tighter and less wobbly. You do not need to re-leveling near as often..
  • Suitable for Ender 3/3 Pro/3 V2 Ender 5/5 Plus/Pro CR-10 CR10S/10S Pro CR 20 3D Printers.
Check Stock

3D Printer Enclosure, Creality Fireproof and Dustproof 3D Printer Enclosure Constant Temperature Protective Cover Room for Ender5/5 pro/5 Plus,CR-10/10S/10S PRO/10MINI,CR-X/CR-20/20PRO- Large

  • Dimensions: 29.5*27.5*35.4”(750x700x900mm). It is compatible with Ender3 V2/Ender5/5 Pro/5Plus,CR-10/10V2/10S/10S PRO/10MINI,CR-X/CR-20(NOTE: Not for CR-10 MAX/ CR-10 S4/S5). Confirming your printer's size firstly..
  • Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability..
  • Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well..
  • Stable Structure: Equipped with a selection of Iron pipes to support, the structure of this 3d printer enclosure is stable. Soundproof and dustproof, giving you a more comfortable printing experience..
  • Easy to Use: This 3d printer enclosure is foldable, easy to store and carry, saving your space. With pockets to hold the necessary tools. Access the printer by unzipping the front of the enclosure..
Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit Compatible with Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5Pro with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

  • 【Upgrade Independent development】CR Touch is upgraded to a metal probe, Exquisite exterior design，Positioning accuracy ≤0.04mm , Automatic....
  • 【Easy to install and easy to use】Download the CR Touch program from the Creative official website and copy it to the TF/SD card. Insert it....
  • 【Widely Application】The kit contains 3 different mounting brackets and extension cords. You can easily install.
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit motherboard.(Don't work....
Check Stock