Reviews Hysteresis Loop

Juried Engineering CD74HC373E CD74HC373 74HC373 74373 High Speed CMOS Logic Octal Transparent Latches with 3-State Outputs Breadboard-Friendly IC DIP-20 (Pack of 10)

Compatible With 3.3-V or 2.5-V Logic Inputs, Hysteresis at Inputs Improves Noise Margins.
Maximum tpd of 15 ns at 5 V, PNP Inputs Reduce DC Loading.
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers.
Example Applications: Servers, LED Displays, Network Switches, Telecom Infrastructure, Motor Drivers, I/O Expanders.

Safe Security: Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
Easy To Use: Easy to install and use, no need to connect DC into the circuit when measuring..
Product Specification: Self-powered, no external power supply required. Measured current AC 0-10/20/50A, output signal DC 0-5V. Straight-through structure design, isolation withstand voltage up to 2000V..
High Quality：The outer casing is made of self-extinguishing material ABS..
Widely Application: Hysteresis is less than 1% and can be used under strong magnetic conditions. Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..

The position of the wire is located in the center of the test wire coil, and the influence of position error is less than 0.3% FS..
Wide measurement range, high accuracy, strong reliability, the hysteresis effect is not affected by the external electric field, and has a noise free frequency band (0.1 Hz-1 MHz)..
It can detect AC leakage current, large current, high-order harmonic current, complex wave current, transient pulse current, phase, power, power factor, etc..
There is no exposed metal conductor in the coil, adopt non-contact measurement method, which is safe and reliable..
It is small in size, light in weight, exquisite in appearance, soft and flexible, suitable for narrow environment and flat cable dense place..

Designed to transform voltage or change the impedance of a load..
The primary and secondary windings are closely coupled..
Sufficient passband, the original winding inductance is large, the leakage inductance is small, the influence of hysteresis loss can be reduced..
Stable performance, high reliability, convenient to use..
Used as components for circuits such as voltage amplification and power output in radio communication, broadcast television, and automatic control..

✅【High Accuracy】Measurement range: ±2.000psi.
✅【12 Selectable Units】Easily toggle between Psi, kPa, Pa, Kgfcm2, ozin2, Bar, mbar, inHg, mmHg, inH2O, ftH2O and cmH2O.
✅【Data Record】This Manometer would be record 99pcs data with time stamp, which help to easier to analyze the data.
✅【Multi-Functional】Measuring Differential pressure, Positive and Negative Pressure, Data Hold, MAX/MIN/Average, Large LCD backlight, Low battery Alarm, Auto Power Off Functions.
✅【Wide Applications】This high-quality manometer is suitable for gas measurement systems, which measuring the air and ventilation system, calibrating and trouble shooting of gas pressure systems, HVAC, gas appliance repair and installation, laboratory testing, etc..

USES: SZT20-CH-420E AC current sensor can measure the AC current in the grid or circuit in real time and convert it to 0-5V / 0-10V or 4-20mA DC current output signal..
VERSATILE: It can be combined with various AD to form a variety of digital centralized acquisition systems. Or output to the PLC to form an automatic control system, or match the traditional analog and digital indicating instruments, display the measured values..
EXCELLENT ATTRIBUTES: mutual current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
HIGH PRECISION: The product has a hysteresis of less than 1% and can be used in strong magnetic field conditions..
ADVANTAGES: It has the characteristics of strong overlapping ability, high precision, high isolation, high safety, low power consumption and strong anti-interference ability..

☛ CURRENT MONITORING -- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
☛ MEASURE CURRENT RANGE -- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
☛ STRAIGHT-THROUGH DESIGN -- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
☛ ABS OUTER CASTING -- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
☛ WIDE APPLICATION -- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..

Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output.Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions..
The measured current AC: 0-10A / 20A / 50A, 0-100A / 150A / 200A can be selected.Output signal DC: 0-5V / 0-10V /4-20mA three forms are available..
Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement.Through-heart structure design, isolation withstand voltage up to 2000V AC..
The outer casing is made of self-extinguishing material, safe and durable.It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
It is suitable for various applications requiring current and voltage conversion.It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..

Easy To Use: Current sensing switch is self-powered, requires no external power supply, operates at 0.2-30A AC, and can be adjusted with a potentiometer..
Convenient And Intuitive: The switch does not limit the number of opening and closing, the reaction speed reaches ms level, and the LED indicator can indicate the working state of the switch..
Accurate And Timely: Current switch is a straight-through structure design with isolation withstand voltages up to 2000V and hysteresis of less than 1%. It can be used under strong magnetic conditions..
High Quality: High-power MOS tube non-contact electronic switch, the outer casing is made of self-extinguishing material ABS..
Widely Used: it is suitable for AC current measurement and monitoring, AC motor overload protection, automatic control system electronic switch..