Reviews Hydraulic Steel Cutter

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...his rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can s....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...his rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can s....
Check Stock

Bravex Tubing Bender Pipe Tube Bender Kit Refrigeration Ratcheting Hand Tool 1/4 to 7/8 Inch with Tube Cutter/Deburring HVAC Tool Refrigeration System Maintenance

  • Suitable Tube Sizes: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the maximum bending angle is 90 degrees, supports reverse bend. Bends pipes in both “forward” and “reverse” configurations..
  • The pipe bender is made of 40Cr steel & 45# steel with high precision machining. The aluminum alloy tube bender heads (replaceable) are firm and durable, preventing pipe deformation. The super long handle increases the leverage, making this tool both convenient and labor-saving..
  • Comes with pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Also includes a deburring tool made of solid plastic structure and high-speed steel bald head. It can quickly, cleanly and easily enlarge the inner diameter of different pipes (such as copper, aluminum, PVC and stainless steel pipes)..
  • If the pipe crack when bent,try heating and cooling to soften the pipe,and it will make perfect bends. Applications：automobile maintenance, refrigerator maintenance, Hvac work, hydraulic systems, etc..
Check Stock

Muzata 330ft Black Vinyl Coated Stainless Steel 3/32inch Thru 1/8inch Wire Rope WR11 Bundle with Cable Cutter up to 5/32\ with 6Pcs Ferrules CR12, CT1

  • ...The breaking strength is up to 358lbs.
  • Ideal for stainless steel -- This cable cutter works excellent in cutting up to 5/32" cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. The aircraft 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09 are recommended to use with. 6 pcs 1/8 cable wire ferrules are included as a gift.
  • Clean Cut -- The blade of this wire rope cutter is quite sharp and durable since it is made of Chrome Vanadium (CR-V) steel and has been hardened by high-frequency quenching. This steel wire cable can make exact and clean cuts without fraying or smashing the cable ends.
Check Stock

Senmit 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8, 3/16 Stainless Steel Cable Railing Fittings, Heavy Duty Head, Come with 8 Pairs Dies and Cable Cutter

  • 【COMPLETE CRIMPER KIT】: This cable crimper includes everything you need for a smooth and user-friendly experience: hydraulic crimper, Cable Cutter, 8 dies (Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG) and a portable, heavy-duty storage case..
  • 【CAPACITY】: This industrial lug crimper has a true 10 US ton capacity, being designed for 1/8 (6 mm Die) 3/16 (10 mm Die) stainless steel cable railing and aluminum or copper wire, providing perfect crimp terminations with every use..
  • 【HEAVY DUTY DURABLE CONSTRUCTION】: The head of crimper is made of durable steel with stainless steel coating, strength and good toughness. The Oxide Crimp Head and Dies won't chip or flake. Dies are made of more hardened 40cr steel, this cable crimper is much better than classic chrome-plated models, for an enhanced performance..
  • 【WIDE APPLICATIONS】: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable crimper will do an outstanding job..
  • 【EASY TO USE】: 4 steps to perfect....
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button..
  • MECHANICAL STRUCTURE: Clamping unit of extrusion blower moulding machine is composed of front & back platens, cla....
Check Stock

Electric Pipe Threader Machine (1/2\ - 2\) Threading, Cutter, Deburrer, NPT P50

  • Chain pipe cutter compatible with RIDGID Standard Series pressing tools (CT-400, 320-E, RP 330-B, RP 330-C, or RP 340).
  • Soil pipe cutter completes the cut in seconds without long, unruly lever arms.
  • Eliminates the need to score the pipe unlike most pipe cutters due to the chain design and hydraulic power of the RIDGID press tool with an easy grip and trigger action.
  • Soil pipe cutter with the capacity to cut 1-1/2 inch to 4 inch No Hub and Service Weight Soil Pipe - Sizes are indexed for ID (inner diameter).
  • Includes Press Snap Soil Pipe Cutter, portable case and operator’s manual.
Check Stock

Keenso Bike Pipe Cutter, Portable Oil Tube Cutter Bike Pipe Disc Cutting Tool to Cut Bike Hydraulic Disc Brake Oil Tubes

  • 【Major Function】I have to tell you the truth: this bike pipe cutter is mainly used to cut bike hydraulic disc brake oil tubes. If you want to change a new bike oil tubes, maybe you will remind this one as soon as posible. This mini oil tube cutter can help you quickly finish this cutting task with fewer time spending and comfortable operation process.
  • 【Easy to Control and Operate】This bike pipe disc cutting tool is very easy to control and operate, and safe to use. The shell can provide a protection for you and your bike, and it can reduce the unnecessary scratches to your bike's pipe. Therefore, you can feel free to use it.
  • 【Good Effect of Cutting】What I have to emphasize is the great effect of cutting. Compared with other cutting tools, the outstanding advantage of this bike hydraulic disc brake oil tubes cutter is quick-acting without burrs. This superior feature can provide you a stable and reliable working environment to repair your bike.
  • 【High Quality】As I am said, this bicycle pipe cutters has the superior characteristic of quick-acting, not easy to deform. The shell is made of high quality ABS plastic, the cutting has strong hardness. What's more, it has slightweight, compact structure, very convenient for you to carry or store.
Check Stock

Anbull 900W Electric Rebar Cutter, Cutting up to 5/8 Inch 4-16mm #5 Rebar, with Replaceable Jaw Blades, Cutting Speed 2.5-3.0S (900W RC-16)

  • Cut Up to #6 3/4"(20mm) Grade 60 Rebar and Round Bar.
  • Includes: Cutter, Steel Carry Case, Wrench Set, Hydraulic Oil, User Manual.
Check Stock