Reviews Hydraulic Breaker Top

KARSSIT 5 ton Electric car Jack kit with Impact Wrench 12V Hydraulic Car Jack for SUV MPV Sedans Truck 2in1 car toos

  • 【5T Cars Changing Tire】:This Electric Hydraulic Jack suitable for vehicles under 5T (11,000 lbs) for tire changing. Equipped with powerful electric motor, it takes less then 2 minutes to lift the cars. The Lifting height range: 6.1-20.86 inch(155mm-530mm). Non-slip cross groove design. It Matches nearly all the vehicles that less than 5 ton like cars, SUV, sedan,pick up,truck. It is a good helper when you need change tire not only in roadside emergencies but also at home garage repairing..
  • 【2 in 1 Kit】：This hydraulic jack is a two-in-one set with 1pc 5T electric hydraulic jack & 1pc electric impact wrench,including 1pc 530mm head for car,1pc safety hammer/1pc 3.5m power cable/1pc battery clamp jumper cable/2 spare fuses/1 pair of gloves/2pc user manual/1pc tool case etc.The electric impact wrench is DC 12V ,Rated power 80w,Max Torque 480N/M,equipped with two sockets (17/19 mm & 21/23 mm), to matching more vehicles with different size of lug nuts in the market..
  • 【Easy to Use Necessity in car trunk】Only has a vertical lift control switch makes the panel easily understand and operate. Car jack 5 ton will automatically stop lifting after reaching the height limit.self-locking function to protect car not fallen-down during use if cut-off power....
Check Stock

2 Pack Hydraulic Car Ramps 10000lbs 5T 11000lbs Low Profile Car Lift Service Ramps Truck Trailer Garage, Height Hydraulic Vehicle Ramps (RED)

  • Truck service ramp elevator is made of high-quality steel, and the exterior is painted to prevent rust. The hydraulic ramp is durable and suitable for all under-vehicle maintenance and inspections..
  • The hydraulic truck ramp can lift 10,000 pounds.
  • the height of the hydraulic part can be adjusted within the range of 9.8-15in..
  • Heavy-duty hydraulic lift is easy to install, use and maintain. It is an ideal choice for maintenance and is very popular among auto maintenance personnel..
  • SATISFACTION GUARANTEE: We take pride in delivering top quality products and are proud to offer our friendly 90 days money back guarantee in case you are not 100% satisfied and wish to return the product for ANY reason. Ordering now has never been easier.
Check Stock

Peddle Bike

  • ...BATTERY CAPACITY】Equiped with a 48V 25Ah battery, the single range of S4 electric bike for adults can be up to 60+ miles per charge on pedal-assist mode and around 40 miles on pure electric power mode..
  • 【DUAL SUSPENSION】Auloor S4 E-bike boasts a dual suspension & hydraulic lockout which effectively absorbs most of the jarring bumps and shocks. 20"X4" fat tires also help to reduce shocks and guarantee a safer and smoother riding experience on complicated and rugged routes..
  • 【EXCELLENT RIDING PERFORMANCE】The S4 e bike is great for mountains, city, sandy, snow. Customize your ride performance with 3 riding modes and 7-speed. The perfect hydraulic braking and lighting system fully protect your safety..
  • 【SUPERIOR HYDRAULIC BRAKING】Auloor S4 adopts hydraulic brakes. Faster and safer stop your fat tire electric bike from moving. Even if the speed reached the top (31mph), the hydraulic brake can react sensitively with just a slight squeeze. Greatly ensures your riding safety to the maximum..
Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

  • High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
  • 2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
  • Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
  • With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....
Check Stock

Truck Upfitters Surface Mounted 100A Circuit Breaker (12V-48V, 100 Amp) for DC Automotive and Marine/Boat use: Main Power Breaker, Audio, Winches, Solar, Lighting, Electric Motors & Other Accessories.

  • Each Circuit Breaker comes with two 4 AWG copper wire lugs with 1/4" holes, two 10mm heat shrink tubes (one red, one black), two 1" stainless steel self-tapping sheet metal hex-head screws with rubber padded metal washers, two rubber washers and 4 copper washers. The hardware is designed to allow the circuit breaker to be attached to a sheet metal surface, although wood screws (not included in this kit) can be used with the copper washers if necessary to attach to a wood or fiberglass substrate..
  • These circuit breakers are an excellent way to protect you car, truck, boat or RV's DC accessories in the event of a short circuited or overloaded condition. When tripped, this DC breaker will remove power to the circuit & place itself in a visibly noticeable "tripped" condition, but can easily be reset by manually flipping the red reset lever back into the dc circuit breaker housing. It is a resettable fuse that can also by manually "tripped" by depressing the red button on top of the breaker..
  • This 100 amp breaker is an auto or marine circuit breaker that can also be used as a power disconnect switch. It is an excellent solution for placing between a battery and 100 Amp Accessory, to use as an amp disconnect switch, as a main 100 amp marine circuit breaker, ....
Check Stock

Motorcycle Chain Breaker Riveter Set, 13-Piece Chain Link Breaker, Master Chain Press Rivet/Riveting Cutter Removal Repair Tool Kit, chain splitter For Motorcycle Bike Atv

  • 【PRACTICAL】Motorcycle Chain Breaker Riveter Set, Chain Link Breaker, Master Chain Press Rivet/Riveting Cutter Removal Repair Tool Kit, 13-Piece chain splitter is an essentail tool, no motorcyle mechanic should do without it..
  • 【FUNCTION】This motorcycle chain breaker tool is designed to rivet chain links to form an endless chain. Chain Breaker Set Could be used with Motorcycle, Bike, ATV to remove and reinstall motorcycle/bike most sizes of rear drive or cam chain #35 to #630 including o-rings..
  • 【PREMIUM MATERIAL】The heavy-duty chain breaker ​is constructed from 45# carbon steel to ensure strength and longevity. surface black anodic oxidation for ultimate anti-rust performance..
  • 【EASY to USE - CHAIN BREAKER RIVETER SET】➊ Loosen the sprocket nut, unscrew the bottom bolt on the chain press tool and place the spring on the pin inside the tool. ➋ replace the tightening bolt and remove the top bolt. ➌ Screw on the handle and lever. ➍ place the tool over your chain, and tighten the tool on the chain pin (this forces the chain and pin out the other side)..
  • 【PACKAGE INCLUDE】1x chain press + 1x handle + 1x lever + 3x anvils, 3x pins (2.2mm, 2.9mm, 3.8mm) + 1x riveter + 1x spring + 2x press plates with 1x carrying case for easy transpor....
Check Stock

Oberdorfer N993R Gear Pump with Relief Valve, 8.8 gpm, 1/2\ NPT, 20 ft Maximum Suction Lift

  • SPECIFICATIONS: The International Fluid Power Birotational Gear Pump is a heavy-duty gear pump with a 2-bolt B mount, 1” NPT work port, 3000 PSI, 23.8 GPM flow rate, and 2400 maximum RPM. It weighs 37 lb..
  • HIGH EFFICIENCY: With 2400 max RPM and 23.8 GPM flow rate, this hydraulic gear pump offers high volumetric output. The IFP gear pump provides exceptionally dynamic performance and operational efficiency in demanding conditions..
  • ROBUST: Our hydraulic rotary pump is equipped with top-grade cast iron flanges, shaft bearings, castings, and an aluminum-alloy body to handle system transmission pressures of up to 3000 PSI. Its endurance makes it ideal for harsh conditions..
  • CONVENIENT: This low flow hydraulic pump, made from top-grade materials and precision-honed to perfection, is compact, portable, and interchangeable with Parker "P51.
Check Stock

ATPEAM Chain Breaker Rivet Cutter | 13PCS Chain Breaker Set Cutter Rivet Tool Kit Chain Breaker for Motorcycle, Bike, ATV

  • Chain Breaker and Rivet Tool Kit: This chain breaker and rivet tool kit will break and rivet 420-630 rear drive chain.
  • For Breaking and joining most drive chain from 35-630.
  • For chain 520 and up, chain breaker riveting cutter is recommend to grind the rivet head.
  • Premium Quality: The chainbreaker rivet cutter tool is made of heavy-duty hardened steel, refusing strong strength and durability, easy to use.
  • Suitable for different sizes of cam chains such as bicycles, motorcycles, and cam drives.
  • Easy To Use: Loosen the sprocket nut, unscrew the bottom bolt on the chain press tool, and place the spring on the pin inside the tool. Then, replace the tightening bolt and remove the top bolt. Screw on the handle and lever, place the tool over your chain, and tighten the tool on the chain pin.
  • Ideal Motorcyle Mechanic Tool: This chain breaker riveting cutter is designed to rivet links to form endless chains, and is versatile.
  • The chainbreaker rivet cutter tool can be used on cam chains to drive chains or as a chain breaker by pushing out pins.
  • Package Included: (1) chain press + (1) handle +....
Check Stock

Winibo ZA0300 Boat Hydraulic Steering System For Outboard up to 150HP With Helm Steering Ram, Cylinder, Tube kits

  • Helm Mounted Hydraulic Steering systems for Boats.
  • Universally Designed for outboards rated up to 150 total Horsepower.
  • Compatible with such brands as Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu and more.
  • Hydraulic Steering kit built in High class Stainless Steel For Years of trouble free use.
  • 24 feet of quality Hydraulic hose, Top mounted pump, and a ¾” tapered steering wheel shaft guarantee a professional installation on most boats.
Check Stock