Reviews Hydraulic Brake Line Flaring Tool

Cal-Van Tools 165 Master Inline Flaring Kit - Double and Single Flares Brake Flaring Tools Professional Tool Kit

  • Specifications: this flaring set includes 3/16 in., 1/4 in., 5/16 in. and 3/8 in. double and single flares which are designed to reduce the chance of....
  • Equipment Design: with compact design, the in-line flaring tool enables the user to flare copper or soft steel tubing in tight spaces. The double....
  • Flaring Tool Adapters: in-line flaring set is designed to simplify flaring chores. The design locks the adapter's cone and tube in a perfect line....
  • Tubing Tool Kit: with the clamp and screws laying pressure directly over the tube, there is a great chance of the tube slipping from the clamp.....
  • Durable Material: flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel materials — perfect for tough job sites.
Check Stock

YAETEK Swaging Tool Kit – Flaring Tool Kit - Tube Cutter Rachet Wrench Swag Tool - 45 Degree Brake Line Tubing Brass Aluminum Copper Extrusion 1/8 to 3/4 for HVAC Water Gas Pipe Automotive Plumbing

  • Sizes of This YaeTek Swaging Flaring Tool Kit: Flare adapters 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" OD.
  • Material: Swivel is made of alloy steel, chrome-plated to assist in reducing friction.
  • Yoke is heat-treated forged steel with max strength and....
  • Do your Brake Line Job: This YaeTek Flaring Swaging Tool Kit 10pc Tubing Flaring Kit includes 2 bars (9 sizes) with a self-centering, slip-on yoke to....
  • A CompleteFlaring Tool kit with necessary tools to complete your job.
  • This Tool makes 45 Degree Flares on soft copper, brass, aluminum and mild steel....
  • Package includes flare adapters, swage fittings, refrigeration wrench to open square valves on hose bibs and acetylene tanks, with a Plastic carrying....
Check Stock

25Ft 3/16 Copper-Nickel Coated Alloy Brake Line Tubing Coil Kit Tube Roll with 16 Fittings

  • 25 Ft Roll x 3/16" copper-nickel alloy COATED OD Zinc plated steel brake line tubing with 16 assort fittings..
  • It won't rust, corrosion resistance, extremely easy to bend by hand and flare by simple tools..
  • The brake line is very flexible and very easy to bend and flaring to mount - you can manually bend our brake lines without the need for a bending tool.
  • It includes SAE flare Nuts and meets relative international standards..
  • With superior durable material and great performance for longer use..
Check Stock

Bonvoisin Hydraulic Tubing Expander Flaring Tool 2 in 1 Swaging Tool Kit 3/16’’-7/8’’ Copper Pipe Expanding 45° Flare Tool with Tubing Cutter 6 Dies for HVAC Air Conditioner Refrigerator Repair

  • [Expanding & Flaring 2 in 1] - This hydraulic swaging tool kit can be used for flaring and expanding of copper pipes, which can meet your maintenance....
  • [Parameters] - Suitable for 12 different pipe diameters: Φ3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 6mm, 10mm, 12mm, 22mm.....
  • [High Efficient & Portable] - Compared with manual flaring tools, hydraulic type is more time-saving, labor-saving and more efficient. The thickened....
  • [Wide Application] - This repair tool is applicable to soft copper / aluminum pipes, and widely used in the maintenance of HVAC, refrigerators, air....
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the product, you can replace it for free..
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

  • Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
  • Direct Replacement For Your Worn 3/16” Die Set.
  • Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
  • This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.
Check Stock

KOOPOOL Double & Single Flaring Tool Kit for Brake Line HVAC System with Tube Cutter Extra 7 Adapters,Brass Copper Pipe 45 Degrees Flaring Tool

  • 【Multifunction】This flaring tool creates 45-degree double or single flares. It can be applied to copper, aluminum, brass, magnesium, and other soft steel lines. Ideal for brake line, HAVC, air conditioning brass line and so on.
  • 【Durable Material】Yoke made of heat-treated steel material for maximum strength and longevity. Swivel made of chrome-plated alloy steel to reduce friction.
  • 【Applications】Double flaring tool kit suitable for: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8" (5, 6, 8, 10, 12, 14, 16mm) single or double flares.
  • Tubing cutter has a 1/8” to 1-1/8” inches (3-30 mm) capacity with inner / outer reamer.
  • 【Tubing Cutter Included】Pipe cutter has 2 rollers and fold-away slide lock reamer deburring blade.
  • used to cut steel, aluminum, and copper tubing.
  • cutting wheel life and adjustment amount for each turn depends on material hardness.
  • 【Easy Storage and Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization.
Check Stock

Bike Hydraulic Disc Aluminium Alloy No Rust Bicycle Hydraulic Disc Brakes Levers Calipers Front Rear Brake Set(Purple)

  • ?GOOD SENSITIVITY, PRACTICAL? This bike hydraulic disc brake is controlled by the brake line, good sensitivity, practical. Exquisite piano paint process and delicate texture of the bicycle front rear brake set , providing comfortable hand smooth..
  • ?SAFE TWO WAY BREAK?The cycling hydraulic disc brake hydraulic piston two-way brake, safe to use. Easy to install, safe and strong. It is convenient to operate the brake..
  • ?5 DIFFEREMT COLORS?Our bicycle oil disc brake with 5 different colors for you to choose, meet your different needs. Bike disc brake can be g great choice for all users..
  • ?CORROSION RESISTANCE, STURDY? This bike hydraulic disc adopts quality aluminium alloy material, wear resistant, corrosion resistance, sturdy and durable. Premium ensures for long use time..
Check Stock