Reviews Hydraulic Battery Cable Crimper

Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • ...eel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • ...eel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws....
Check Stock

Brileine Battery Cable Crimping Tool from AWG 8-1/0, Battery Cable Lug Crimper Tool for Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs AWG 8-1/0

  • The Battery Terminal Crimper - Built in 6 ways 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²(Similar to 6 dies of 8, 6, 4, 2, 1, 1/0 AWG) using rotating heads with a spring loaded locking pin to keep the heads.
  • Durable Material - Made of high quality carbon steel is more sturdy and durable for heavy crimping works.
  • Comfortable Ergonomics Design Handles - Comfortable grip with Anti-slip surface saves strength and improves user's experience.
  • Easy Operating Way - Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
  • Battery cable crimper with high precision jaw design ensure a tightly connection after crimping with strong work pressure, which this tool has widely application in automatic electronics work.
  • Widely Application in the Copper & Aluminum Cable lug and Non-Welding & Standard Electrical Connection.
Check Stock

AMZCNC 10 Tons Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool With 9 Pairs of Dies

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 5.6Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

Muzata 40Pack 1/8 Swageless Cable Railing Kit Invisible Terminal Fixed End Toggle Anchor for Metal Post Angle Adjustable T316 Stainless Steel Stair Deck Corner CB17 CV2 CL1

  • ...tate from 0-180 degrees. Note: this cable railing kit ONLY work as a fixed end, it need to work with a tensioner to construct a cable run.
  • ONLY works for hollow METAL posts(20mm≥hole size≥10mm ).Package include:40packs terminals.
  • No Need Crimper and Reusable - With the patent swageless design, you don’t need a Hydraulic Crimper to swage, which saves your time and efforts, also expenses of the crimper. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • One-Post Corner & Wall Post Solution - With a well-designed compact body, you could use two invisible toggle anchor terminals CB17 at one corner METAL post of 2”x2” to 10”x10”, and they won't hit each other. This fitting is also a great solution for posts against the wall or situations that you are unable to get behind. Cable railing tensioner Muzata CR36 or CB40 is recommended to work with CB17.
  • NiceView System - We pre-designed a NiceView cable railing system to help you get a customized project including cable railing kits CB05 CB17, protector sleeves CR72 CR66, angled washer ....
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • ...eel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag ....
Check Stock

Hammer Battery Lug Crimping Tool for 8, 6, 4, 2, 1/0, 2/0, 3/0, 4/0 American Wire Gauge (AWG) Wire and Cable

  • Hammer Battery Lug Crimper for use with 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1/0 AWG, 2/0 AWG, and 3/0 (American Wire Guage) cable.
  • Perfect for crimping battery cables, welding cables and any other wire crimps for your auto or marine project.
  • Lug Crimper is spring loaded and only requires a standard hammer and solid surface to operate.
  • Lug Crimper is made of high quality hardened steel for years of maintenance free use.
  • Compact size! Only 3 1/2 inches tall, allowing easy storage in any size tool box.
Check Stock

Battery Terminal Crimping Tool,Knoweasy Battery Cable Lug Crimper with Wire Cutter for Heavy Duty Wire Copper Lugs AWG 10,8,6,4,2,1/0

  • ✅【Rotate Crimp Dies:】The Wire Crimper is built in 6 AWG standard dies:6/10/16/25/35/50 mm² ( 10, 7, 5, 6, 2, 1AWG ),Hexagonal rotating dies....
  • ✅【Durable Tool: 】This battery cable crimper is made of high quality carbon steel ,durable and sturdy to use, suitable for home and electrical....
  • ✅【Easy Operation: 】Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal....
  • ✅【Comfortable Handles Design:】Long handle of cable crimper results in less efforts when crimping,it saves strength and improves user’s....
  • ✅【Application&Compatible:】Widely used in Copper，Aliuminum Cable lug and Non-Welding&Standard Electrical Connection.
Check Stock