Reviews Hvac Condensate Pumps
Rectorseal 83113 EZ 113 Trap 3/4-Inch
- Effectively drains condensate in a variety of hvac systems.
Check StockLittle Giant 554550, VCMX-20ULST 1/3 hp 84 GPH Condensate Removal Pump, 6 ft. Cord, 115V-60Hz, Pack of 3 pcs
- The Little Giant brand specializes in the water transfer market with products including wastewater, sump, sewage, effluent, dewatering, condensate, magnetic drive, and utility pumps.
- as well as low pressure sewer systems, and water garden pumps and products..
Check StockPaasche Airbrush TG-300R Double Action Gravity Feed Airbrush Set and Compressor with Tank None
- Effectively drains condensate in a variety of hvac systems.
Check StockLeak Saver HVAC Guys - Foam Blaster (18oz.) - Penetrating Coil Cleaner - for AC and Refrigeration Units - Clean and Deodorize Evaporator (No-Rinse) & Condenser Coils - Neutral Citrus Scent
- HVAC PROFESSIONAL FORMULA: Supercharge your coil cleaning with the HVAC Guys Foam Blaster penetrating coil cleaner. Field tested and used by fellow HVAC professionals, the high-pressure spray and delayed foaming action will liquify grime and deodorize dirty coils and drain pans. Designed for professional use..
- POWERFUL ACTIVE EXPANDING FOAM ACTION: The Foam Blaster works by using a high-pressure spray that penetrates deep into the coil and then actively expands into a dirt liquifying foam. Effectively clean dirty coils and restore their efficiency. Leaves a neutral fresh citrus scent..
- FOR EVAPORATORS (NO-RINSE) AND CONDENSERS: The Foam Blaster is made for both evaporators (no rinsing required) and condensers (light rinsing with water required). When using on evaporators, the condensate water from the unit in operation will rinse off the dirt and product..
- DESIGNED FOR ALL COOLING EQUIPMENT: The Foam Blaster is suitable for use on all HVAC units, refrigeration systems, automotive radiators, fan blades, metal filters, and more!.
- 100% SATISFACTION GUARANTEE: We stand 100% behind the quality of our products. If for any reason you are not satisfied with your order, reach out to us directly and we will make it right..
Check StockSupplying Demand CP230 SPCP230 HVAC Condensate Pump 230V with Audible Alarm
- This pump is designed to remove condensate from AC systems, condensing furnaces and boilers, ice machines, drinking fountains, and coolers. These pumps incorporate an audible alarm, and an overflow switch that can be used to shut down the system..
- Motor Horsepower: 1/10 HP | Voltage:208 / 230 VAC | Watts: 75 W | Amperage: .72 A | Frequency: 50 / 60 Hz | Motor Overload Protector:Yes | Height Total: 7.25" | Length Total: 11.25" | Width Total:5" | Tank Capacity: 1/2 Gal. | Discharge: 3/8" Barb | Maximum Temperature: 110° F | Alarm Sound Level: 80 dB.
- 22 feet of standard lift @ 10 GPH | Independent NC safety switch & motor switch | Suitable for acidic condensate | 1/4" quick connect terminals | 3 terminals provided for easy connection.
- Independent NO audible alarm switch rated @ 80 dB | Specially designed leak-free motor and safety float | 3/8" rubber ball check valve.
- Vibration absorbing feet | Metal side mount tabs, 11.5" on center | 3 inlet holes | 6 foot power cord included.
Check StockHigh-Capacity Condensate Removal Pump with Tubing - VCMX-20ULST NXTGen • LRJ Enterprises
- VCMX 20ULST NXTGen condensate removal pump with tubing operates at 1.5 amps and 93 watts with thermal protection and safety switch for added peace-of-mind For removal of condensate from air conditioners, suitable for high efficiency, gas furnace condensations, and condensing boilers 1/30 HP high-performance motor pumps 84 GPH maximum.
- Fully automatic with start, stop, and safety switch Includes mounting bracket for easy installation Check valve outlet: 0.38 inch, and 1.13-inch inlet cCSAus listed Safety switch, 20 feet of 0.38-inch tubing, and anti-sweat sleeve.
- Thermally protected, fan-cooled motor Rubber feet for vibration/noise dampening Specifications: Model: VCMX 20ULST Shut off: 21 feet Volts: 115 Hertz: 60 Amps: 1.5 Watts: 93 Cord: 6 feet with 3 prong plug Check valve: 0.38 inches Safety switch: Yes Maximum water temperature: 140 degrees Fahrenheit Dimensions (L x W x H): 10.2 x 4.8 x 6.5 inches Weight: 5.5 pounds.
Check StockRegulator Gauge High Uniweld Nitrogen For Rhp400
- The Nitrogen Sludge Sucker and Blaster Kits are specifically designed for multiple uses in the HVAC/R industry (Tank Not Included – Sold Separately).
- Nitrogen Regulator with protective rubber gauge boots - Maximum Delivery Pressure up to 400 PSI.
- Purging copper lines with low pressure nitrogen displaces the oxygen, preventing oxidation and the resulting scale.
- Pressure testing a system for leaks prior to evacuating and charging will save time and money.
- Cleaning a condensate drain line is easy with a Sludge Sucker or Sludge Blaster.
Check StockDiversitech CP-16 Condensate Pump, 16' Lift, 120V
- PUMP WITH MOUNTING PAD: Mini split condensate pump for HVAC systems up to 36,000 BTU (3-tons)..
- EASY INSTALLATION AND EFFECTIVE OPERATION: Compact pump has an auto start and stop operation complete with vibration/sound isolation mounting pad and all connection accessories..
- RELIABLE SPEED WITH AUTO ON/OFF: Reservoir features a reliable reed switch with debris screen. Automatic start and stop operation.
- BY THE NUMBERS: Rated for water temps 41°- 140° F, 50% duty cycle. Suction lift 4 ft..
- INCLUDED: ½ in. drain inlet adapter and 5 ft. of ¼ in. ID tubing..
Check StockSupplying Demand CP115 SPCP115 HVAC/R Condensate Pump with Alarm 1/10HP 115VAC
- High quality pump designed to remove condensate from AC systems, condensing furnaces and boilers, ice machines, drinking fountains, and coolers. These pumps incorporate an audible alarm, and an overflow switch that can be used to shut down the system..
- Applications include HVACR, ice machines, drinking fountains, and coolers..
- 22 feet of standard lift at 10 GPH | Independent NC safety switch & motor switch | Suitable for acidic condensate | 1/4 inch quick-connect terminals | 3 terminals are provided for easy connection | Independent NO audible alarm switch rated at 80 dB.
- Specially designed leak-free motor and safety float | 3/8 inch rubber ball check valve | Vibration absorbing feet | Metal side mount tabs, 11-1/2 inches on center | 3 inlet holes | 6 foot power cord included.
- Alarm Sound Level: 80 dB | Maximum Temperature: 110° F | Tank Capacity: 1/2 gallon | Discharge: 3/8 inch | Barb. Frequency: 60 Hz | Motor Overload Protector: Yes | Amperage: 1.45 A | Watts: 80 W | UL Listed: Yes | Motor Horsepower: 1/10 HP | Voltage: 115 VAC | Dimensions: 5 inches wide x 11-1/4 inches long x 7-1/4 inches tall.
Check Stock