Reviews Hub Less Pipe

Oatey 43564 Snap-In Floor Drain, 3 In, Solvent Weld, Abs Plastic, 3

Ideal for installations on a slab where a pan liner membrane is not required.
Available with high quality stainless steel strainer, brass or Nickel finish cast grates for heavy traffic applications.
Drain base engineered as hub for 2-inch sch 40 pipe or solvent welds inside 3-inch sch 40 pipe.

ATTENTION: Please Read: the inner diameter measures 4" inch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
AIRFLOW: PVC pipe cover works as pipe sc....

Package Content: You will receive a socket saver for removing SCH 40 from a hub and suitable for 1/2 inch variable speed drills. It can easily cut various plastic pipes, such as ABS, PVC and DWV pipes..
Premium Material: Our inside pipe cutter for PVC pipe is made of high quality stainless steel, sturdy enough and durable, not easy to break or bend. You can use it with confidence..
Practical: You only need to cut the broken part of pipes with our plumbing tools. No need to replace the whole pipe, thus it can save your time and energy to repair broken pipes. Very practical..
Easy to Use: You just need to install the socket saver on your power drills, then place it in the pipe and start to drill, lastly clean the inside of pipe and connect with new pipe connector..
Important Tips: Please ensure the size of our product to match your power drills before ordering. Sharp pipe reamer should be away from kids to prevent accidental injuries..

Patented – unique slot on the side of vent cap allows water condensation to drain.
Simple – no efforts required, vent easy to install inside hub of PVC fitting adapter (not included).
Tough – stainless steel won’t corrode or rust, Type 304 mesh screen prevents leaves, debris and wildlife from entering vent pipe.
Airflow – no obstruction to vent allows maximum airflow.
All vent types – furnace, water heater, air, intake, exhaust, and roof vents and water drains.
Fittings – Please note that hub fitting adapter is not included and must be purchased separately – check for compatible sizing.

This Grease trap has an 8 pound grease capacity and measures 14.2" Long by 11.2" Tall by 10.5" Wide. It measures 2" from top to pipe opening, 7.5" from pipe opening to base.
Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating.
Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed..
T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic.
This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute.

INCLUDES - One (1) leakSMART patented, 3/4” automatic water shut-off valve..
IMMEDIATE RESPONSE - When paired with the leakSMART sensors and smart hub (sold separately), leakSMART’s automatic shut-off valve quickly shuts off....
EASY-TO-READ INDICATORS - Colored green & red LED lights on display indicate open or closed valve status.
PIPE INSTALLATION TYPES - Accommodates different pipe materials and installations (male and female NPT threaded, SharkBite, or PEX tubing).
AVAILABLE IN MULTIPLE SIZES - leakSMART’s Automatic Shut-Off Valve comes in three sizes, 3/4″, 1″, and 1-1/4″ - Be sure to measure before you....

HIGH QUALITY MATERIAL: pvc pipe cutter with SK5 blades coated with PTFE for rust resistance, hardness to HRC55 and low cutting friction. The rubberised aluminium plated die-cast handle is strong and lightweight..
ADVANCED STRUCTURAL DESIGN: The triangular blade of the DOMINOX PVC cutter penetrates the pipe wall with less pressure, causing less damage to the pipe and less damage to the hand. The excellent ratchet mechanism allows the user to quickly complete the opening and closing cutting operation with one hand. The ergonomic rubber-wrapped handle saves effort and continuous work without injury to the hand..
HUMANIZED DETAILS: The bottom of the handle is equipped with a safety latch for easier and safer storage. Easy and quick blade change, no special tools required..
WIDE APPLICATION RANGE: DOMINOX pipe cutters can cut a wide range of pipes with an outside diameter of 2-1/2.

INCLUDES - One (1) leakSMART patented, 1” automatic water shut-off valve..
IMMEDIATE RESPONSE - When paired with the leakSMART sensors and smart hub (sold separately), leakSMART’s automatic shut-off valve quickly shuts off....
EASY-TO-READ INDICATORS - Colored green & red LED lights on display indicate open or closed valve status.
PIPE INSTALLATION TYPES - Accommodates different pipe materials and installations (male and female NPT threaded, SharkBite, or PEX tubing).
AVAILABLE IN MULTIPLE SIZES - leakSMART’s Automatic Shut-Off Valve comes in three sizes, 3/4″, 1″, and 1-1/4″ - Be sure to measure before you....

Features jaw opening parallel to handle and narrow hook jaw head.
Offset wrenches provide easy entry into tight spaces and at awkward angles.
The aluminum RIDGID offset pipe wrench delivers the durability of comparable heavy-duty offset pipe wrenches but weighs up to 40 percent less.
18-inch (450 mm) pipe wrenches are ideal for pipe diameters of 1 inch (25 mm) to 2 inch (50 mm) with a pipe capacity of up to 2-1/2 inches (65 mm).