Reviews Hp Server Sas Hdd

Intel Integrated RAID Module Storage Controller RMS25KB040

This RAID controller has four internal SAS/SATA ports and uses a x8 or wider PCI Express* server board slot.1.2 Operating System Support Supports SAS/SATA devices at speeds up to 300 MB/second per port Supports the SATA II protocol over SAS transp.
Contains four internal SAS/SATA ports Supports up to 8 SAS/SATA II devices via expanders Supports up to 64 virtual disks Supports up to 8 arrays Supports RAID levels 0, 1, 5, 6, 10, 50, and 60 Hardware exclusive OR (XOR) assistance.
Online capacity expansion Online RAID level migration Physical drive roaming RAID controller migration Fast virtual drive initialization Hot-spare drive configuration, both private and global.
SATA drive hot-plug Staggered spin-up Native command queuing Support for SMART* Auto rebuild Variable data stripe size configured per virtual drive.
128 MB of ECC DDR2 667 MHz SDRAM integrated on the controller Read and write cache policy SES2 intelligent enclosure support PCI hot-plug support Background media test (patrol read) Background data integrity test.

Hot swap up to four 3.5" SATA or SAS hard drives using three 5.25" bays.
4 Bay 3.5" SATA SAS Backplane with trayless design.
Hot Swap Mobile Rack for three 5.25" bays, supports SAS I/II and SATA I/II/III (up to 6Gbps).
4 bay mobile rack with durable plastic and aluminum construction provides a cost-effective solution for drive maintenance and hot swapping drives....
2 fans and venting to optimize heat dissipation / HDD Rack/ SAS Backplane/ SATA Backplane / hard drive tray / 4-bay SAS/SATA backplane / Hard drive....

Supports 4x 2.5" SAS/SATA HDD/SSD (5-9.5mm).
Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (Single channel SAS, SAS host required).
Installs into any standard external 5.25" bay.
Tray-less and door-less design for hot-swapping bare drives without tools or screws.
Improved individual drive power button and robust drive ejection button/mechanism.

Backplane support for 8 port SAS/ SATA drives and 6 GB/s mini-sas SFF-8087. Supports eight 2.5″/3.5″ Sas/SATA HDD/SSD.
Independent drive status LED. Supports four low profile PCI/ PCIe Slots.
Auto lock handle for Easy to fixed the 2U rack mount on the cabinet.

1u Rm Sr1530hcls Dp 3x Hs Sas 45nm 400wType Server Form Factor Rack-mountable - 1U Approximate Dimensions (WxDxH) 16.9 in x 20 in x 1.7 in Localization North America.
Server Scalability 2-way Processor No CPU RAM 0 MB (installed) / 12 GB (max) - DDR II SDRAM - ECC Storage Controller Serial Attached SCSI ( Serial Attached SCSI ).
IDE Server Storage Bays Hot-swap 3.5" Hard Drive None..
Monitor None. Graphics Controller ATI ES1000 - 16 MB Networking Network adapter - Ethernet, Fast Ethernet, Gigabit Ethernet - Ethernet Ports : 2 x Gigabit Ethernet.

[ High Speed Data Transfer] CableCreation Mini SAS 36 Pin cable is a high-speed data storage interface designed for high-throughput and fast data....
[ SFF-8087 Port ]This SFF-8087 interface is mainly used on the mini SAS 5i array card as an internal SAS cable. mass storage interconnection between a....
[ Wide Compatibility ] Mini SAS 36 pin port compatible with Raid Cards like R710, R720, T610 server, H200 controller, PERC H700, H310, PE T710, NORCO....
[ 91 Degree Design] Right Angle design can make for better cable management in some situations, especially in tight spaces.
[ What You Get] You will get 2 x Mini SAS 36 Pin to 36 Pin cable, backed with 25 Months Warranty and lifetime technical service.

Compact 1U rackmount hot-swap enclosure for 2.5" SAS/SATA HDs with high quality PSU..
Two SFF-8088 Mini-SAS connectors attached to the controller installed in your server..