Reviews Hotend For Ender 3

Authentic Creality Assembled Hotend Kit for Ender 3 / Ender 3 Pro/Ender 3 V2 with Capricorn PTFE and Upgraded Pneumatic Fittings, Thermistor, Heating Element, MK8 Sock and 4 Extra Nozzles

  • This assembled replacement stock hotend from Creality is a plug and play replacement or spare unit for all Creality brand printers including Ender series as well as the CR series printers. See product description for more info on CR series. Also included are some extra brass nozzles, a hotend sock and upgraded Capricorn PTFE tubing which drastically improves the performance of this part over its standard PTFE option..
  • Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Capricorn PTFE is also manufactured to the highest specifications for 1.75mm filament to ensure that there is no space in the tube once the filament is inside. This perfect fir ensures much better results on retaction moves and helps to ensure a steadier and even flow rate from your hotend!.
  • Upgraded Pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fitting is a PC4-M6 and the hotend fitting is PC4-M10. These are the standard sizes for most open source 3D printers and the same sizes used by most Chi....
Check Stock

Creality Official Sprite Extruder, All Metal Dual Gear Feeding Direct Drive Extruder with 80N Stepper Motor for Creality Ender-3 S1/Ender-3 S1 Pro/CR-10 Smart Pro 3D Printer

  • ...riginal - NOTE: Item not come with control board, mounting bracket, wire. ONLY compatible with Creality Ender-3 S1/Ender-3 S1 Pro/CR-10 Smart Pro3D Printer..
  • Support Printing Flexible and High Temperature Filament - With direct drive extruder and up to 300°C and all metal hotend kit, the creality sprite extruder supports 1.75 MM filaments, including PLA, TPU, PETG, ABS, PA, PC etc..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The Creality ender 3 pro direct drive adapt double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite models..
  • Creality 3D Official Store - We are the ONLY Creality 3D Official store. There are more than 20 engineers for after-sales service and provide 24/7 customer service w....
Check Stock

2022 Official Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor, Direct Drive Upgrade Kit for Creality Ender 3 pro, Ender 3, Ender3v2, Ender 3 Max, Support TPU Filament

  • ...lication]100% Creality Original Sprite Extruder Pro Upgrade Kit, just fits for Ender 3/ Ender 3 Pro/ Ender 3V2/ Ender3 Max, providing direct extrusion and high temperature printing conditions..
  • [Special Design] Exquisite design, perfect combination of extruder and printing hotend make more powerful functions. Large torque, extrusion force up to 80N. Double gear feeding, stable and reliable. The double tooth structure does not damage filaments and the feeding is more reliable and stable. All-metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • [Strong compatibility] Compatible with more types of filaments including PLA/ TPU/ PETG/ ABS, etc. When printing under high temperature, like flexible TPU. It can potimize TPU printing performance. Multi-material capability enjoys more creativity..
  • [Easy to install and use] It doesn’t affect the inherent function of printer because it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly. No....
Check Stock

Sprite Extruder Pro Upgrade Copper+ Titanium Alloy Throat Tube Bimetal Heatbreak Compatible with Creality Ender 3 S1, Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 3D Printer (Bimetal Heatbreak)

  • This heatbreak is Only Compatible with FDM 3D Printer equipped with Sprite Extruder or Sprite extruder pro, like Ender 3 S1, Ender 3 S1 Pro, CR-10 Smart Pro, Sermoon V1 and Sermoon V1 pro 3D Printer.
  • This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction..
  • Copper and Titanium TC4 Bi-Metal Heatbreak has High temperature resistant up to 500C degree, smooth inner wall reduce clogging. It is named "Bi-Metal Heatbreak" with different thermal conductivity. It is composed of 2 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged..
  • NOTE: the smooth part size is OD6mm, not suitable for other hotend, only Compatible with Creality Sprite extruder or sprite extruder pro use, please know before ordering.
Check Stock

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

  • ...bolt so that you can adjust the pressure of the extruder gear as needed..
  • ✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
  • ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
  • ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is included. Referrring to our 7th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine. (NOTE: The springs are around 25mm long, which is longer than Creality ender 3/ender 3 pro/ender 3 V2 springs. You may use a tool to cut it to be shorter if you need it or adjust ....
Check Stock

Creality Official Ender 3 Aluminum Extruder 3D Printer Ender 3 Extruder CR-10 Extruder Upgrade MK8 Drive Feed Bowden Extruders for Ender 3 Series Creality CR-10 Series Ender 5 Series

  • UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S,....
  • STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws....
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used....
  • ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve....
  • Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

Official Creality Ender 3 Max FDM 3D Printer with Meanwell Power Supply Silent Mainboard Carborundum Glass Platform Large Print Size 300 x 300 x 340mm

  • Meanwell Power Supply: The powerful 350W power supply can be adjusted to adapt the voltage from 100V to 240V. Safe to use, and powerful in heating up..
  • Silent Mainboard: Ender 3 Max adopt the German import TMC2208 chip driver. It is effective to reduce the motor noise and shake that brings a....
  • Carborundum Glass Platform: With its superiority in heat resistance and surface flatness, the Carborundum glass platform helps prints adhere better....
  • Dual Cooling Fans: The axial cooling fan continuously helps hotend heat dissipation. The double blower fans promote quick cooling on the extruded....
  • All Metal Extruder: All-metal Bowden extruder is powerful in filament feed-in..
Check Stock