Reviews Hotend For 3d Printer

WINSINN 50mm 5015 Blower Fan 12V 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing 1000mm/39in Cable Brushless Cooling 50mmx15mm 2PIN Pack of 4Pcs

  • ✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow....
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work,....
  • ✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
  • ✔️Connector & Cable length: XH2.54 – 39in(1000mm), meet connection needs.
  • ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel....
Check Stock

4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

  • ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup..
  • ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation..
  • ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern..
  • ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A..
Check Stock

WINSINN 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 2Pcs)

  • ✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
  • ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, DVD player, small communication devices for heat radiation, PC CPU server, DVRs, switches, network storage devices and can be used as a replacement fan for any electronic products..
  • ✔️Packing List: 2 x 50mm Blower Fan 24v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm.
Check Stock

AITIAO 6Pcs 5015 Blower Cooling Fan,DC 24V 50x50x15mm 3D Printer Blower Brushless Cooling Fans 5015 Oil Bearing Turbine Fans Blower with 2Pin Terminal for 3D Printer Hotend Extruder Heatsinks

  • DC 12V 5015 blower cooling fan which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any other cooling needs..
  • Specification:Rated Voltage:DC 24V, Current:0.1A, Speed:5589±10%RPM, Noise:30dBA, Bearing: Oil Bearings..
  • Power Connection: 2Pin-XH2.54, Size:50*50*15mm(L*D*H), Cable length: – 11.8in(300mm).
  • Wide Application: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products..
  • Package Included: You will receive 6pcs 5015 mini cooling fan.Any questions, you can contact us and we will give you a satisfied solution..
Check Stock

ChowThink High Temperature Fast Heating E3D V6 Hot End Full Kit 3D Printer Extruder Parts Accessories Parts

  • Well-made: Copper Chrome-plated Heater Block, good thermal conductivity, high temperature resistance，Hollow design, fast heat dissipation.
  • Compatible with all 1.75mm E3D V6 Makerbot 3D Printer，Easy to install, With installation tool ..
  • Easy to install Upgrade the all metal hotend to effectively solve the problem of leakage and blockage during the printing process..
  • Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Copper chrome-plated Heater Block, Copper chrome-plated Wear Resistant MK8 0.4mm....
  • Made by ChowThink，Any Questions contact us freely..
Check Stock

MK10 3D Printer Extruders Kit 5 Pcs Aluminum Heater Block + 1.75mm Extruder Throat Tube M7 Thread + Cotton Heater Tape for 3D Printer Wanhao Filament

  • ✹✹ High quality copper and stainless steel, ensure concentricity and roundness.
  • Designed for many common types of 3D printers, solid aluminium construction with aperture..
  • ✹✹ Aluminium Heater Block for Extruders in 3D-Printers. A drilling with an M4 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M4 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M7 thread for the Nozzle..
  • ✹✹ Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc..
  • ✹✹ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better..
  • ✹✹ Any questions, you can tell us and we will give you a satisfied solution!.
Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

  • Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
  • High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
  • Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
  • Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
  • Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check Stock

Creality Official Ender 3 Direct Drive Upgrade Kit, Comes with 42-40 Stepper Motor Hotend Kit, 1.75mm Direct Drive Extruder Fan and Cables Support Flexible TPU Filament

  • 100% Creality Official - Creality Ender 3 direct drive upgrade kit, compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
  • Easy Assemble - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a full extrusion kit. Come with longer connecting cable, tools, accessories and diagram instruction, easy to assemble..
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
  • Strong & Sturdy All Metal Hotend - This direct extruder kit is all metal structure, durable and wear resistant and Integrated structure is convenient for wiring and replacing..
  • Creality 3D Official Store - We are the ONLY Creality 3D Official store. There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifet....
Check Stock

Upgrade Plated Wear Resistant M6 Thread Brass Nozzle Pack 0.4mm for 1.75mm V6 Hotend Titan Aero Extruder Prusa I3 MK3 MK3S Anycubic I3 Mega S/Zero 2.0 / Vyper 3D Printer 4x0.4mm

  • Nozzle size: 0.4mm, M6 thread for 1.75mm filament use.
  • The nozzle material is brass to keep good thermal conductivity, the Nickel coating can increase the lifetime of the nozzle and prevent the nozzle....
  • Nickel plating has High hardness and wear resistance, Apply Nickel plating on the nozzle surface can reduce the friction, to make it smoother when....
  • Compatible with V6 V5 hotend, Ultimaker 2+ olsson block hotend, Prusa i3 Mk3 mk3s Anycubic I3 Mega 3D Printer.
Check Stock