Reviews Hot Temperature Transmission Fluid

ABN Silicone Heater Pad Car Battery Heater Pad Engine Block Heater Pad Oil Pan Heater Pad, 4x5 Inch – 120V 250 Watt

...l quickly up to 194 degrees Fahrenheit (90 C) for those cold start mornings.
IMPROVE OIL FLOW: Transmits heat (to a built-in maximum temperature of 194 F / 90 C) to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine.
Increases engine longevity and extends transmission life.
EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 5.75-foot (1.8m) 2-prong power cord into any wall outlet for instant warming.
Once applied, the stick on oil pan heater remains permanently installed on any metal surface (seal edges for longer adherence.
BUILT TO LAST: Flexible heating pad is rated at 120 Volts and 250 Watts.
Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
Power cord stays attached : not removable.
FOR AUTO WARMING: 250-watt car engine heater pad designed to heat fluids with any metal surface such as engine oil pan, fuel tank, reservoir, transmission pan, and more.
For metal surfaces only : Keep away from plastics.
Caution : Extremely hot, built-in automatic thermostat (not programab....

Motorcraft MERCON SP is a premium-quality fluid recommended by Ford Motor Company specifically for use in Ford, Lincoln and Mercury vehicles that require MERCON SP type fluid.
This product also provides excellent performance in electronically controlled automatic transmissions.
It provides protection against rust and corrosion.
Check owner guide and transmission fluid charts for application.
Do not use in transmissions requiring MERCON V, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid, or Type-F fluid.

Motorcraft MERCON V is a premium-quality automatic transmission fluid.
recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
Do not use in transfer cases where MERCON ATF was previously recommended.
Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.

MaxTow Transmission Temperature Gauge is Designed to Monitor & Display the Fluid Temperature Running Through Your Truck's Transmission & Help Prevent....
Transmission Temperature Readings from 80° to 260° Fahrenheit - 2-1/16" (52mm) Gauge with Black Dial, Clear Lens, Illuminated Red Needle & Digital....
Double Vision Display with Analog & Digital Readouts - Green LED Backlighting - 3 Daytime & 3 Nighttime Dimming Modes.
Includes 1/8-27 NPT Temperature Sensor, 9' Sensor Harness, 5' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
MaxTow Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

MaxTow Transmission Temperature Gauge is Designed to Monitor & Display the Fluid Temperature Running Through Your Truck's Transmission & Help Prevent....
Transmission Temperature Readings from 80° to 260° Fahrenheit - 2-1/16" (52mm) Gauge with White Dial, Clear Lens, Illuminated Red Needle & Digital....
Double Vision Display with Analog & Digital Readouts - Green LED Backlighting - 3 Daytime & 3 Nighttime Dimming Modes.
Includes 1/8-27 NPT Temperature Sensor, 9' Sensor Harness, 5' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
MaxTow Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Excellent lubricating characteristics for quiet operation and smooth shifting in approved transmissions.
Controlled friction properties for smooth and efficient transmission of power across all normal temperature ranges.
Helps to control transmission shudder and provide excellent vehicle drivability.
Helps to extend transmission life based on excellent wear control.
Long fluid life based on excellent oxidation resistance.

Motorcraft MERCON V is a premium-quality automatic transmission fluid.
recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
Do not use in transfer cases where MERCON ATF was previously recommended.
Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.

MaxTow Transmission Temperature Gauge is Designed to Monitor & Display the Fluid Temperature Running Through Your Truck's Transmission & Help Prevent Overheating.
Transmission Temperature Readings from 80° to 260° Fahrenheit - 2-1/16" (52mm) Gauge with Black Dial, Clear Lens, Illuminated Red Needle & Digital Display.
Double Vision Display with Analog & Digital Readouts - Blue LED Backlighting - 3 Daytime & 3 Nighttime Dimming Modes.
Includes 1/8-27 NPT Temperature Sensor, 9' Sensor Harness, 5' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
MaxTow Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

7L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
Fluid temperature range: 35°F- 200°F/1°- 95°C.
Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....