Reviews Hose Barbs

Whatman 6721-5010 Polydisc TF PTFE In-line Filter 1.0 Micron, 13 psi Maximum Pressure, 900 Flow Rate (Pack of 10)

Materials of Construction: Inlet-Cover, Base, and Collar Cap: Anodized aluminum, Hose Barb Adapters: Polyethylene, Support Screen and Underdrain Disc: Electropolished type 316 stainless steel, O-Ring: Viton, Thrust Ring: PTFE and Effective Filtration Area 9.6 cm2.
Dimensions: Overall Length (Excluding Hose Barbs): 5.7 cm (2.2 in.), Diameter: 5.9 cm (2.3 in.), and Inlet/Outlet Connections: 3⁄8 in. FNPT.
hose barb adapters accept 6.4 mm (1⁄4 in.) ID tubing..
Maximum Operating Temperature: Limited by filter type, hose barb adapters 93 °C (199 °F), or O-ring 204 ºC (399 ºF) and Maximum Operating Pressure 14 bar (1400 kPa, 200 psi)..
Sterilization: Provided non-sterile. Autoclavable if desired at 121 - 123 ºC (250 - 253 ºF) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min..
Pall 47 mm In-line Lab Filter Holder, Lightweight, Anodized Aluminum Filter Holder Convenient design allows opening and closing without disrupting membrane. Designed for in-line liquid or gas filtration, Durable construction for stack sampling. Type Filter Holder.

Commercial grade Sankey ‘D’ Keg coupler for domestic brand kegs (I. E. Bud, Coors, miller, American craft beer)..
Nsf approved coupler that features a durable chrome plated brass body with a stainless steel Liquid probe..
Built in safety features include a pressure relief valve that is rated up to 53 psi (3. 7 bar)..
Comes with (2x) 5/16″ Tailpieces. Liquid and gas connections are standard beer nut threads (7/8″-14)..
Short black lever style handle that will fit into the smaller diameter kegs (tall 1/4 Barrel kegs)..
Threads are the standard beer nut so can use your existing beer and gas lines..
Included Components: Sankey D Coupler, Hose Barbs, Hose Clamps.

ID: 1/2" (12.7mm), OD: 0.78 inch (19.7mm), AN8 NBR liner hose, 3 feet.
Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines.
Working Pressure 2Mpa. Burst Pressure 5Mpa, Handles temperature ranges of -40 to +275 degrees F.
Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc.
The Fuel Lines for fuel injected systems, are oil resistant,cold-resistant and ethanol tolerance.

Quick-Disconnect Fittings, Straight-Through Hose barbs.
Suitable for 4mm-5mm Inner Diameter Tube.
Subject Material: POM Sealing ring material: EDPM.
Suiltable for a wide variety of applications in pharmaceutical, food and beverage, labaratory, chemical.

Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer..
How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on..
If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set..
Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings..

【IMPROVE THE TASTE OF BEER】This beer filter equipped with 150 micron / 100 mesh screen, can improve the taste and clarity of your beer by filtering trub, krausen, hops, and proteins. It comes with 2 hose barbs, 1/2in(12mm) hose barb, 1/4"(6mm)hose barb available..
【FAST AND EFFICIENT】This water hose strainer is perfect for large batches and dry hopped beers. Can save time and beer, pay for itself in a few batches, get more beer out of each batch, easier and quicker than cold crashing or additives..
【EASY TO USE】This beer brewing filter is easy to use and clean, gravity fed using your racking siphon, no need to pressurize or pump, fewer parts to clean, fits 3/8in inner diameter siphon tubing (standard size)..
【QUALITY MATERIAL】This beer inline filter made of high quality material, rugged and durable for repeated use, the maximum operating temperature is 150℉. The maximum operating pressure is up to 150 psi..
【100% QUALITY ASSURANCE】We are very confident in the quality of this inline hose filter, and provide warranty or refund for it. Please feel free to reach us if you have any questions about your purchase..

【High Quality】:Stainless Steel 2 micron diffusion stone and parts make it more durable and keep beer fresh taste.
【Aeration and Oxygenation Kit】:1/2'' MPT Homebrew Inline Aeration/Oxygenation Diffusion Stone with barb fitting,full Kit comes ready to assemble to your equipment.
【 Brewing Tools】Oxygenate wort thoroughly to insure a healthy fermentation and carbonate quickly,connects inline with third fitting connected to your oxygen regulator. The oxygen stone will aerate your wort as they flow through..
【Simple Assembly】:1/4" barb inlet for oxygen regulator or air pump connection,1/2" Hose barbs for beer flow,it can connects inline with any Kettle, Pump, or counterflow/plate wort chiller.
【Package Include】:1* Stainless Diffusion stone + 1*Stainless tee fiting + 2*Hose barb Fitting.